Difference between revisions of "Sketcher NewSketch/es"

From FreeCAD Documentation
Jump to: navigation, search
(Updating to match new version of source page)
(Updating to match new version of source page)
Line 1: Line 1:
 
{{GuiCommand/es|Name=Sketcher NewSketch|Workbenches=[[Sketcher Workbench/es|Croquizador]], [[PartDesign Workbench/es|Diseño de Piezas]]|MenuLocation=Croquizador→ Crear croquis}}
 
{{GuiCommand/es|Name=Sketcher NewSketch|Workbenches=[[Sketcher Workbench/es|Croquizador]], [[PartDesign Workbench/es|Diseño de Piezas]]|MenuLocation=Croquizador→ Crear croquis}}
  
====Descripción====
+
====Description====
 +
This will create a new sketch.
  
====Utilización====
+
====Usage====
 +
Clicking on the icon without a face (pre-)selected will pop up a dialog asking if the sketch should be drawn on the
 +
* XY-Plane
 +
* XZ-Plane
 +
* YZ-Plane
 +
You can change an offset to any of the three planes and the side of the offset.
  
 
Clicking on the icon with a (pre-selected) face will cause the sketch to be mapped to the selected face.
 
Clicking on the icon with a (pre-selected) face will cause the sketch to be mapped to the selected face.
  
 
====Note====
 
====Note====
 +
The sketch can be re-mapped to antoher already existing face.
  
 
The sketch can be moved in the 3D-Space using [[Placement]].
 
The sketch can be moved in the 3D-Space using [[Placement]].

Revision as of 19:24, 26 November 2014

Sketcher NewSketch.svg {{{Name/es}}}

Ubicación en el Menú
Croquizador→ Crear croquis
Entornos de trabajo
Croquizador, Diseño de Piezas
Atajo de teclado por defecto
None
Introducido en versión
-
Ver también
None


Description

This will create a new sketch.

Usage

Clicking on the icon without a face (pre-)selected will pop up a dialog asking if the sketch should be drawn on the

  • XY-Plane
  • XZ-Plane
  • YZ-Plane

You can change an offset to any of the three planes and the side of the offset.

Clicking on the icon with a (pre-selected) face will cause the sketch to be mapped to the selected face.

Note

The sketch can be re-mapped to antoher already existing face.

The sketch can be moved in the 3D-Space using Placement.



Other languages:
čeština • ‎Deutsch • ‎English • ‎español • ‎français • ‎hrvatski • ‎italiano • ‎polski • ‎português • ‎português do Brasil • ‎română • ‎русский • ‎svenska • ‎Türkçe • ‎中文(中国大陆)‎