Sketcher CreatePeriodicBSpline/ru: Difference between revisions
No edit summary |
(Created page with "# Нажмите кнопку {{KEY|24px '''Нарисовать периодический B-сплайн'''}}. # Создайт...") |
||
Line 21: | Line 21: | ||
==Как использовать== |
==Как использовать== |
||
# |
# Нажмите кнопку {{KEY|[[File:Sketcher Create Periodic BSpline.svg|24px]] '''Нарисовать периодический B-сплайн'''}}. |
||
# Создайте серию точек, нажимая в 3D-виде. Пока команда активна, созданные точки соединяются прямыми линиями, и вокруг каждой точки создается круг вспомогательной геометрии. |
|||
# Create a series of points by clicking in the 3D view. While the command is active, the created points are connected with straight lines, and a construction circle is created centred on each point. |
|||
# Нажмите правую кнопку мыши, чтобы завершить ввод и сгенерировать кривую. |
|||
# Pick the first curve point, or right-click to terminate the input and generate the curve. |
|||
# В зависимости от настроек инструмент может оставаться активным, чтобы нарисовать новую кривую. Нажмите правую кнопку мыши еще раз, чтобы завершить команду. |
|||
# Depending on preferences, the tool may remain active to trace a new curve. Right-click again to exit the command. |
|||
* Можно переопределить вес контрольных точек, изменив радиусы кругов вспомогательной геометрии. Для этого сначала удалите ограничения равенства на кругах. Ограничьте радиусы произвольно, вес контрольных точек будет определяться относительными радиусами окружностей. Это работает подобно гравитации: чем больше круг по отношению к другим, тем больше кривая будет притягиваться к контрольной точке. |
|||
* It is possible to define the weight of the control points by changing the radii of the weight circles. The equality constraints on the circles need to be deleted first. The radius constraint is arbitrary, the weight of the control points will be defined by the relative radii of the circles. It works similar to gravity: the bigger a circle is in relation to the others, the more the curve will be attracted to the control point. |
|||
* Видимость управляющего полигона, гребня кривизны, степени и множества узлов можно включать/выключать с помощью панели инструментов [[Sketcher Workbench#Sketcher B-spline tools/ru|Инструменты B-сплайна]]. |
|||
* The visibility of the control polygon, the curvature comb, the degree and the knot multiplicity can be toggled on/off from the [[Sketcher Workbench#Sketcher B-spline tools|B-spline tools]] toolbar. |
|||
* |
* Изучите другие инструменты на панели инструментов [[Sketcher Workbench#Sketcher B-spline tools/ru|Инструменты B-сплайна]], чтобы узнать о них больше. |
||
==Limitations== |
==Limitations== |
Revision as of 02:42, 30 August 2019
Sketcher Нарисовать периодический B-сплайн |
Системное название |
---|
Sketcher CreatePeriodicBSpline |
Расположение в меню |
Sketch → Геометрия эскизов → Нарисовать периодический B-сплайн |
Верстаки |
Sketcher |
Быстрые клавиши |
Нет |
Представлено в версии |
0.17 |
См. также |
Sketcher B-spline |
Описание
Этот инструмент рисует периодическую (замкнутую) кривую B-сплайна по его контрольным точкам.
Периодическая кривая B-сплайна (белого цвета) состоит из 5 точек. На рисунке изображены: контрольный многоугольник зеленого цвета (прямые, соединяющие красные точки), синие круги с весом и гребень кривизны зеленым цветом. Цифра (3) в центре относится к степени B-сплайна, а цифры (1) и (2) на узлах, лежащих на кривой, относятся к их множественности.
Как использовать
- Нажмите кнопку Нарисовать периодический B-сплайн.
- Создайте серию точек, нажимая в 3D-виде. Пока команда активна, созданные точки соединяются прямыми линиями, и вокруг каждой точки создается круг вспомогательной геометрии.
- Нажмите правую кнопку мыши, чтобы завершить ввод и сгенерировать кривую.
- В зависимости от настроек инструмент может оставаться активным, чтобы нарисовать новую кривую. Нажмите правую кнопку мыши еще раз, чтобы завершить команду.
- Можно переопределить вес контрольных точек, изменив радиусы кругов вспомогательной геометрии. Для этого сначала удалите ограничения равенства на кругах. Ограничьте радиусы произвольно, вес контрольных точек будет определяться относительными радиусами окружностей. Это работает подобно гравитации: чем больше круг по отношению к другим, тем больше кривая будет притягиваться к контрольной точке.
- Видимость управляющего полигона, гребня кривизны, степени и множества узлов можно включать/выключать с помощью панели инструментов Инструменты B-сплайна.
- Изучите другие инструменты на панели инструментов Инструменты B-сплайна, чтобы узнать о них больше.
Limitations
- Many types of constraints are not supported at this time. Only the B-spline's control points and knots can be constrained.
- Trimming and extend tools are not supported.
- The shape of a B-spline curve can only be edited by dragging one of the control points. The knots lying on the curve cannot be selected.
Sketcher
- General: Create sketch, Edit sketch, Map sketch to face, Reorient sketch, Validate sketch, Merge sketches, Mirror sketch, Leave sketch, View sketch, View section, Toggle grid, Toggle snap, Configure rendering order, Stop operation
- Sketcher geometries: Point, Line, Arc, Arc by 3 points, Circle, Circle by 3 points, Ellipse, Ellipse by 3 points, Arc of ellipse, Arc of hyperbola, Arc of parabola, B-spline by control points, Periodic B-spline by control points, B-spline by knots, Periodic B-spline by knots, Polyline, Rectangle, Centered rectangle, Rounded rectangle, Triangle, Square, Pentagon, Hexagon, Heptagon, Octagon, Regular polygon, Slot, Fillet, Corner-preserving fillet, Trim, Extend, Split, External geometry, Carbon copy, Toggle construction geometry
- Sketcher constraints:
- Geometric constraints: Coincident, Point on object, Vertical, Horizontal, Parallel, Perpendicular, Tangent, Equal, Symmetric, Block
- Dimensional constraints: Lock, Horizontal distance, Vertical distance, Distance, Radius or weight, Diameter, Auto radius/diameter, Angle, Refraction (Snell's law)
- Constraint tools: Toggle driving/reference constraint, Activate/deactivate constraint
- Sketcher tools: Select unconstrained DoF, Select associated constraints, Select associated geometry, Select redundant constraints, Select conflicting constraints, Show/hide internal geometry, Select origin, Select horizontal axis, Select vertical axis, Symmetry, Clone, Copy, Move, Rectangular array, Remove axes alignment, Delete all geometry, Delete all constraints
- Sketcher B-spline tools: Show/hide B-spline degree, Show/hide B-spline control polygon, Show/hide B-spline curvature comb, Show/hide B-spline knot multiplicity, Show/hide B-spline control point weight, Convert geometry to B-spline, Increase B-spline degree, Decrease B-spline degree, Increase knot multiplicity, Decrease knot multiplicity, Insert knot, Join curves
- Sketcher virtual space: Switch virtual space
- Additional: Sketcher Dialog, Preferences, Sketcher scripting
User documentation
- Getting started
- Installation: Download, Windows, Linux, Mac, Additional components, Docker, AppImage, Ubuntu Snap
- Basics: About FreeCAD, Interface, Mouse navigation, Selection methods, Object name, Preferences, Workbenches, Document structure, Properties, Help FreeCAD, Donate
- Help: Tutorials, Video tutorials
- Workbenches: Std Base, Arch, Assembly, CAM, Draft, FEM, Inspection, Mesh, OpenSCAD, Part, PartDesign, Points, Reverse Engineering, Robot, Sketcher, Spreadsheet, Start, Surface, TechDraw, Test Framework, Web
- Hubs: User hub, Power users hub, Developer hub