Sketcher CreateFillet/ru

Создать скругление

Скругление с сохранением точки пересечения

Верстак Sketcher

Скругление
Системное название
Sketcher_CreateFillet
Расположение в меню
Sketch → Геометрия эскиза → Создать скругление
Верстаки
Sketcher
Быстрые клавиши
G F F
Представлено в версии
-
См. также
Создать скругление с сохранением точки пересечения

Описание

Данный инструмент создает скругление между двумя линиями, соединенными в одной точке.

introduced in version 0.22: If two straight edges connected by a Coincident constraint are filleted or chamfered, the corner point can optionally be preserved by adding a Point object that has a Point on object constraint with both edges. Constraints connected to the corner point are then transferred to the new point object.

Применение

See also: Drawing aids.

• Выберите вершину, соединяющую две линии; или нажмите на две соединенные линии, расстояние от вершины, на котором вы нажмете, установит радиус сопряжения.
• Нажатие Esc или правой кнопки мыши закрывает функцию.

Notes

• The construction geometry arc of a chamfer is not visible outside the sketch. It cannot be deleted without breaking the geometry of the chamfer.
• Some (conic) curves may need to be trimmed before they can be filleted.
• The fillet radius depends on the selection method. If a Coincident constraint connecting two straight edges is selected, the fillet radius is derived from the length of the shortest edge. If two edges are selected the radius is the distance from the first clicked point to the (extended) intersection of the edges.

Создать скругление

Скругление с сохранением точки пересечения

Верстак Sketcher

Sketcher

• General: Create sketch, Edit sketch, Map sketch to face, Reorient sketch, Validate sketch, Merge sketches, Mirror sketch, Leave sketch, View sketch, View section, Toggle grid, Toggle snap, Configure rendering order, Stop operation

---

• Sketcher geometries: Point, Line, Arc, Arc by 3 points, Circle, Circle by 3 points, Ellipse, Ellipse by 3 points, Arc of ellipse, Arc of hyperbola, Arc of parabola, B-spline by control points, Periodic B-spline by control points, B-spline by knots, Periodic B-spline by knots, Polyline, Rectangle, Centered rectangle, Rounded rectangle, Triangle, Square, Pentagon, Hexagon, Heptagon, Octagon, Regular polygon, Slot, Fillet, Corner-preserving fillet, Trim, Extend, Split, External geometry, Carbon copy, Toggle construction geometry

---

• Sketcher constraints:
  • Geometric constraints: Coincident, Point on object, Vertical, Horizontal, Parallel, Perpendicular, Tangent, Equal, Symmetric, Block
  • Dimensional constraints: Lock, Horizontal distance, Vertical distance, Distance, Radius or weight, Diameter, Auto radius/diameter, Angle, Refraction (Snell's law)
  • Constraint tools: Toggle driving/reference constraint, Activate/deactivate constraint

---

• Sketcher tools: Select unconstrained DoF, Select associated constraints, Select associated geometry, Select redundant constraints, Select conflicting constraints, Show/hide internal geometry, Select origin, Select horizontal axis, Select vertical axis, Symmetry, Clone, Copy, Move, Rectangular array, Remove axes alignment, Delete all geometry, Delete all constraints

---

• Sketcher B-spline tools: Show/hide B-spline degree, Show/hide B-spline control polygon, Show/hide B-spline curvature comb, Show/hide B-spline knot multiplicity, Show/hide B-spline control point weight, Convert geometry to B-spline, Increase B-spline degree, Decrease B-spline degree, Increase knot multiplicity, Decrease knot multiplicity, Insert knot, Join curves

---

• Sketcher virtual space: Switch virtual space

---

• Additional: Sketcher Dialog, Preferences, Sketcher scripting

Документация пользователя

• Начинающим
• Установка: Загрузка, Windows, Linux, Mac, Дополнительных компонентов, Docker, AppImage, Ubuntu Snap
• Базовая: О FreeCAD, Интерфейс, Навигация мыши, Методы выделения, Имя объекта, Настройки, Верстаки, Структура документа, Свойства, Помоги FreeCAD, Пожертвования

---

• Помощь: Учебники, Видео учебники
• Верстаки: Std Base, Arch, Assembly, CAM, Draft, FEM, Inspection, Mesh, OpenSCAD, Part, PartDesign, Points, Reverse Engineering, Robot, Sketcher, Spreadsheet, Start, Surface, TechDraw, Test Framework, Web

---

• Addons: Менеджер дополнений, Внешние верстаки, Cкрипты и макросы

---

• Hubs: Уголок пользователя, Уголок опытных пользователей, Уголок разработчиков