Sketcher CreateArcOfParabola

From FreeCAD Documentation
Revision as of 19:43, 18 February 2019 by Mario52 (talk | contribs) (Marked this version for translation)
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.

Sketcher Arc of parabola

Menu location
Sketch → Sketcher geometries → Create an arc of parabola
Workbenches
Sketcher
Default shortcut
None
Introduced in version
0.17
See also
Sketcher Arc of Ellipse, Sketcher Arc of hyperbola

Description

This tool creates an arc of parabola by focus, vertex and endpoints.

How to use

  1. Press the Create an arc of parabola button.
  2. Click in the 3D view to define the focus point (labelled 1 in the picture above).
  3. Click in the 3D view to define the tip of the arc of hyperbola (labelled 2 in the picture above).
  4. Click in the 3D view to define the first end point (labelled 3 in the picture above).
  5. Click a fourth time in the 3D view to define the other end point (labelled 4 in the picture above).