Sketcher CreateArcOfHyperbola/en: Difference between revisions

From FreeCAD Documentation
(Updating to match new version of source page)
(Updating to match new version of source page)
Line 17: Line 17:
[[File:Sketcher Arc of Hyperbola 01.png|none]]
[[File:Sketcher Arc of Hyperbola 01.png|none]]


==How to use==
==Usage==


# Press the {{KEY|[[File:Sketcher Hyperbolic Arc.png|24px]] '''Create an arc of hyperbola'''}} button.
# Press the {{KEY|[[File:Sketcher Hyperbolic Arc.png|24px]] '''Create an arc of hyperbola'''}} button.

Revision as of 21:39, 14 February 2020

Sketcher Arc of hyperbola

Menu location
Sketch → Sketcher geometries → Create an arc of hyperbola
Workbenches
Sketcher
Default shortcut
None
Introduced in version
0.17
See also
Sketcher Arc of Ellipse, Sketcher Arc of parabola

Description

This tool creates an arc of hyperbola by center, major radius and endpoints.

Usage

  1. Press the Create an arc of hyperbola button.
  2. Click in the 3D view to define the major radius center (labelled 1 in the picture above).
  3. Click in the 3D view to define the major radius length, which is also the tip of the arc of hyperbola (labelled 2 in the picture above).
  4. Move the mouse away from the two last selected points to see how the arc will look like. Click again when the approximate desired curvature is shown. This point will define the first end point (labelled 3 in the picture above).
  5. Click a fourth time in the 3D view to define the other end point (labelled 4 in the picture above).