Sketcher CreateArcOfHyperbola/en: Difference between revisions

Revision as of 02:47, 5 November 2018

Other languages:

Menu location
Sketcher Arc of hyperbola
Sketch → Sketcher geometries → Create an arc of hyperbola
Workbenches
Sketcher
Default shortcut
None
Introduced in version
0.17
See also
Sketcher Arc of Ellipse, Sketcher Arc of parabola

This tool creates an arc of hyperbola by center, major radius and endpoints.

Press the Create an arc of hyperbola button.
Click in the 3D view to define the major radius center (labelled 1 in the picture above).
Click in the 3D view to define the major radius length, which is also the tip of the arc of hyperbola (labelled 2 in the picture above).
Move the mouse away from the two last selected points to see how the arc will look like. Click again when the approximate desired curvature is shown. This point will define the first end point (labelled 3 in the picture above).
Click a fourth time in the 3D view to define the other end point (labelled 4 in the picture above).

@@ Line 1: / Line 1: @@
-{{Template:UnfinishedDocu}}
 <languages/>
 {{GuiCommand
-|Name=Sketcher Hyperbolic Arc
+|Name=Sketcher Arc of hyperbola
+|Icon=Sketcher Hyperbolic Arc.png
 |Workbenches=[[Sketcher Workbench|Sketcher]]
 |MenuLocation=Sketch → Sketcher geometries → Create an arc of hyperbola
+|Version=0.17
 |SeeAlso=[[Sketcher CreateArcOfEllipse|Sketcher Arc of Ellipse]], [[Sketcher_CreateArcOfParabola|Sketcher Arc of parabola]]
 }}
@@ Line 11: / Line 12: @@
 This tool creates an arc of hyperbola by center, major radius and endpoints.
+[[File:Sketcher Arc of Hyperbola 01.png|none]]
 {{Version|0.17}}
@@ Line 16: / Line 19: @@
 ==How to use==
-# Press on the {{KEY|[[File:Sketcher Hyperbolic Arc.png|24px]] '''Create an arc of hyperbola'''}} button.
+# Press the {{KEY|[[File:Sketcher Hyperbolic Arc.png|24px]] '''Create an arc of hyperbola'''}} button.
+# Click in the 3D view to define the major radius center (labelled 1 in the picture above).
-#
+# Click in the 3D view to define the major radius length, which is also the tip of the arc of hyperbola (labelled 2 in the picture above).
+# Move the mouse away from the two last selected points to see how the arc will look like. Click again when the approximate desired curvature is shown. This point will define the first end point (labelled 3 in the picture above).
+# Click a fourth time in the 3D view to define the other end point (labelled 4 in the picture above).
 {{Clear}}