Constraint Symmetric

From FreeCAD Documentation
Jump to: navigation, search
This page is a translated version of the page Sketcher ConstrainSymmetric and the translation is 0% complete.

Outdated translations are marked like this.
Other languages:
čeština • ‎Deutsch • ‎English • ‎español • ‎français • ‎italiano • ‎polski • ‎português • ‎português do Brasil • ‎română • ‎русский • ‎svenska

Constraint Symmetric.svg Constraint Symmetric

Veja também
Sketch → Sketcher constraints → Constrain symmetrical
Bancadas de trabalho
Sketcher, PartDesign
Atalho padrão
None
Veja também
Constraint Parallel


Description

The symmetrical constraint constrains two selected points to be symmetrical around a given line, i.e., both selected points are constrained to lie on a normal to the line through both points and are constrained to be equidistant from the line. Alternatively it can constrain two points to be symmetric with respect to a third one.

How to use

SymmetricConstraint1.png

Select two points (vertexes) in the sketch and a line in the sketch. The selected points and the line will be dark green.

SymmetricConstraint2.png

Click on the SymmetricalConstraint icon Sketcher ConstrainSymmetric.png in the Sketcher toolbar or select the Constrain Symmetrical menu item from the Sketcher Constraints sub menu of the Sketcher (or Part Design) menu item.

This will apply the constraint to the selected items.

SymmetricConstraint3.png

Note: if you want to define a symmetry constraint with respect to a point, the order of the selection is important, depending on if you select the tool at the beginning or at the end.

  • If you click the tool first: select the first point, then the symmetry reference point, and finally the second point.
  • If you click the tool last: select the first point, then the second point, and finally the symmetry reference point.

See the tracker issue #4144, and forum thread.