Coquizador RestringirSimétrico

From FreeCAD Documentation
Revision as of 17:35, 22 December 2013 by Renatorivo (talk | contribs) (Created page with "{{GuiCommand/es|Name=Constraint Symmetric|Workbenches=Croquizador, Diseño de Piezas|MenuLocation=Croquizador → Restric...")

Constraint Symmetric

Ubicación en el Menú
Croquizador → Restricciones del Croquizador → Restricción de Simetría
Entornos de trabajo
Croquizador, Diseño de Piezas
Atajo de teclado por defecto
Ninguno
Introducido en versión
-
Ver también
Restricción Paralela

Description

The symmetrical constraint constrains two selected points to be symmetrical around a given line, i.e., both selected points are constrained to lie on a normal to the line through both points and are constrained to be equidistant from the line. Alternatively it can constrain two points to be symmetric with respect to a third one.

Operation



Select two points (vertexes) in the sketch and a line in the sketch. The selected points and the line will be dark green.



Click on the SymmetricalConstraint icon in the Sketcher toolbar or select the Constrain Symmetrical menu item from the Sketcher Constraints sub menu of the Sketcher (or Part Design) menu item. This will apply the constraint to the selected items.



This is a geometric constraint and has no editable parameters.