Sketcher ConstrainSymmetric: Difference between revisions

From FreeCAD Documentation
(Marked this version for translation)
(How to use)
Line 16: Line 16:
The symmetrical constraint constrains two selected points to be symmetrical around a given line, i.e., both selected points are constrained to lie on a normal to the line through both points and are constrained to be equidistant from the line. Alternatively it can constrain two points to be symmetric with respect to a third one.
The symmetrical constraint constrains two selected points to be symmetrical around a given line, i.e., both selected points are constrained to lie on a normal to the line through both points and are constrained to be equidistant from the line. Alternatively it can constrain two points to be symmetric with respect to a third one.


==Operation== <!--T:3-->
==How to use== <!--T:3-->
[[File:SymmetricConstraint1.png|256px]]<br /><br />
[[File:SymmetricConstraint1.png|256px]]<br /><br />
Select two points (vertexes) in the sketch and a line in the sketch. The selected points and the line will be dark green.<br /><br />
Select two points (vertexes) in the sketch and a line in the sketch. The selected points and the line will be dark green.<br /><br />

Revision as of 20:21, 24 September 2019

Sketcher ConstrainSymmetric

Menu location
Sketch → Sketcher constraints → Constrain symmetrical
Workbenches
Sketcher
Default shortcut
S
Introduced in version
-
See also
Constraint Parallel

Description

The symmetrical constraint constrains two selected points to be symmetrical around a given line, i.e., both selected points are constrained to lie on a normal to the line through both points and are constrained to be equidistant from the line. Alternatively it can constrain two points to be symmetric with respect to a third one.

How to use



Select two points (vertexes) in the sketch and a line in the sketch. The selected points and the line will be dark green.



Click on the SymmetricalConstraint icon in the Sketcher toolbar or select the Constrain Symmetrical menu item from the Sketcher Constraints sub menu of the Sketcher (or Part Design) menu item. This will apply the constraint to the selected items.



This is a geometric constraint and has no editable parameters.