Sketcher Contrainte rayon

From FreeCAD Documentation
Revision as of 11:00, 19 January 2019 by Jpg87 (talk | contribs) (Replaced content with "==Utilisation==")

Contrainte Rayon

Emplacement du menu
Sketch → Contraintes Sketcher → Contrainte radiale
Ateliers
Sketcher
Raccourci par défaut
Aucun
Introduit dans la version
-
Voir aussi
Contrainte distance, Contrainte distance horizontale , Contrainte Contrainte verticale

Description

Cette contrainte contraint la valeur du rayon d'un cercle ou d'un arc à avoir une valeur spécifique. Si plusieurs cercles ou arcs sont sélectionnés avant le lancement de la commande, une invite vous demande si tous les éléments sélectionnés doivent partager le même rayon. Dans le cas d'une réponse affirmative, une contrainte de rayon sera ajoutée et des contraintes égale longueur seront ajoutées à tous les éléments. Dans le négatif, des contraintes de rayon distinctes seront créées pour chaque cercle / arc, mais avec des valeurs égales à éditer séparément après la création.

Utilisation

  1. Pick one or more circles or arcs.
  2. Press the Constrain radius button.
  3. A pop up dialog opens to edit or confirm the value. Press OK to validate. In case multiple circles/arcs were selected, all constraints will adopt this value. Edit their separate values by double-clicking on the dimension label in the 3D view; or in the Constraints list, double-click on the constraint or right-click and select Change value.
  4. Optionally the dimension label and line can be moved and rotated in the 3D view by clicking on the value and dragging while keeping the left mouse button pressed.

Note: the constraint tool can also be started with no prior selection. By default the command will be in continue mode to create new constraints; press the right mouse button or ESC once to quit the command.