Sketcher RadiusFestlegen
Constraint Radius |
Menüeintrag |
---|
Sketch → Sketcher constraints → Constrain radius |
Arbeitsbereich |
Sketcher, PartDesign |
Standardtastenkürzel |
Keiner |
Eingeführt in Version |
- |
Siehe auch |
Constraint Distance, Constraint Horizontal, Constraint Vertical |
Beschreibung
This constraint constrains the value of the radius of a circle or arc to have a specific value. If more than one circle or arc is selected before launching the command, a prompt will ask if all selected elements should share the same radius. In the case of an affirmative response, one radius constraint will be added, and equal length constraints will be added to all elements. In the negative, separate radius constraints will be created for each circle/arc but with equal values to be edited separately after creation.
Anwendung
Wählen Sie einen Bogen oder Kreis in der Skizze aus, indem Sie auf diesen klicken (wird hwervorgehoben, um die Auswahl anzuzeigen).
Wenden Sie die Abhängigkeit an, indem Sie in der Skizzierer-Werkzeugleiste auf das Symbol Radius einschränken klicken oder im Kontextmenü des Sketcher-Constraints im Menü Sketcher (oder Part Design) den Menübefehl Radius auswählen ( abhängig davon, welche Workbench ausgewählt ist).
Der Radius wird auf seinen aktuellen Wert festgelegt, wenn die Beschränkung angewendet wird.
Um den Wert für die Abhängigkeit zu ändern, doppelklicken Sie entweder auf die Abhängigkeit in der 3D-Anzeige (Rot wird angezeigt, wenn die Abhängigkeit ausgewählt ist) oder doppelklicken Sie auf die Abhängigkeit im Fenster Einschränkungen der Registerkarte Aufgaben der Combo-Ansicht.
Dies öffnet ein Pop-up-Fenster.
Geben Sie den gewünschten Wert für den Radius in das Popup-Fenster ein und klicken Sie auf OK, um den Wert der Abhängigkeit festzulegen.
Der Einschränkungs-Wert wird auf den Wert gesetzt, der im Popup-Fenster eingegeben wurde.
- Pick one or more circles or arcs.
- Press the Constrain radius button.
- A pop up dialog opens to edit or confirm the value. Press OK to validate. In case multiple circles/arcs were selected, all constraints will adopt this value. Edit their separate values by double-clicking on the dimension label in the 3D view; or in the Constraints list, double-click on the constraint or right-click and select Change value.
- Optionally the dimension label and line can be moved and rotated in the 3D view by clicking on the value and dragging while keeping the left mouse button pressed.
Note: the constraint tool can also be started with no prior selection. By default the command will be in continue mode to create new constraints; press the right mouse button or ESC once to quit the command.
- General: Create sketch, Edit sketch, Map sketch to face, Reorient sketch, Validate sketch, Merge sketches, Mirror sketch, Leave sketch, View sketch, View section, Toggle grid, Toggle snap, Configure rendering order, Stop operation
- Sketcher geometries: Point, Line, Arc, Arc by 3 points, Circle, Circle by 3 points, Ellipse, Ellipse by 3 points, Arc of ellipse, Arc of hyperbola, Arc of parabola, B-spline by control points, Periodic B-spline by control points, B-spline by knots, Periodic B-spline by knots, Polyline, Rectangle, Centered rectangle, Rounded rectangle, Triangle, Square, Pentagon, Hexagon, Heptagon, Octagon, Regular polygon, Slot, Fillet, Corner-preserving fillet, Trim, Extend, Split, External geometry, Carbon copy, Toggle construction geometry
- Sketcher constraints:
- Geometric constraints: Coincident, Point on object, Vertical, Horizontal, Parallel, Perpendicular, Tangent, Equal, Symmetric, Block
- Dimensional constraints: Lock, Horizontal distance, Vertical distance, Distance, Radius or weight, Diameter, Auto radius/diameter, Angle, Refraction (Snell's law)
- Constraint tools: Toggle driving/reference constraint, Activate/deactivate constraint
- Sketcher tools: Select unconstrained DoF, Select associated constraints, Select associated geometry, Select redundant constraints, Select conflicting constraints, Show/hide internal geometry, Select origin, Select horizontal axis, Select vertical axis, Symmetry, Clone, Copy, Move, Rectangular array, Remove axes alignment, Delete all geometry, Delete all constraints
- Sketcher B-spline tools: Show/hide B-spline degree, Show/hide B-spline control polygon, Show/hide B-spline curvature comb, Show/hide B-spline knot multiplicity, Show/hide B-spline control point weight, Convert geometry to B-spline, Increase B-spline degree, Decrease B-spline degree, Increase knot multiplicity, Decrease knot multiplicity, Insert knot, Join curves
- Sketcher virtual space: Switch virtual space
- Additional: Sketcher Dialog, Preferences, Sketcher scripting
- Getting started
- Installation: Download, Windows, Linux, Mac, Additional components, Docker, AppImage, Ubuntu Snap
- Basics: About FreeCAD, Interface, Mouse navigation, Selection methods, Object name, Preferences, Workbenches, Document structure, Properties, Help FreeCAD, Donate
- Help: Tutorials, Video tutorials
- Workbenches: Std Base, Arch, Assembly, CAM, Draft, FEM, Inspection, Mesh, OpenSCAD, Part, PartDesign, Points, Reverse Engineering, Robot, Sketcher, Spreadsheet, Start, Surface, TechDraw, Test Framework, Web
- Hubs: User hub, Power users hub, Developer hub