Difference between revisions of "Sketcher ConstrainPerpendicular/it"

From FreeCAD Documentation
Jump to: navigation, search
(Updating to match new version of source page)
(Created page with "{{GuiCommand/it|Name=Constraint Perpendicular|Name/it=Perpendicolare|Workbenches=Schizzo, PartDesign|MenuLocation=PartDes...")
Line 1: Line 1:
{{GuiCommand|Name=Constraint Perpendicular|Workbenches=[[Sketcher Workbench|Sketcher]], [[PartDesign Workbench|PartDesign]]|MenuLocation=Sketch Sketcher constraints Constrain perpendicular|Shortcut=N|SeeAlso=[[Constraint InternalAngle|Constraint Angle]]}}
+
{{GuiCommand/it|Name=Constraint Perpendicular|Name/it=Perpendicolare|Workbenches=[[Sketcher Workbench/it|Schizzo]], [[PartDesign Workbench/it|PartDesign]]|MenuLocation=PartDesign Schizzo Perpendicolare|Shortcut=N|SeeAlso=[[Constraint InternalAngle/it|Angolo]]}}
  
 
====Description====
 
====Description====

Revision as of 23:13, 21 December 2013

Constraint Perpendicular.svg Perpendicolare

Posizione nel menu
PartDesign → Schizzo → Perpendicolare
Ambiente
Schizzo, PartDesign
Avvio veloce
N
Introdotto nella versione
-
Vedere anche
Angolo


Description

The Constrain perpendicular constraint forces two selected lines or line segments in the sketch to be perpendicular to each other

Operation

The sketch below has two lines at a random angle.

ConstrainPerpendicular1.png

Select the two line segments you require to be perpendicular

ConstrainPerpendicular2.png

then click the Constrain Perpendicular icon Sketcher ConstrainPerpendicular.png in the Sketcher toolbar or select the Constrain Perpendicular menu item from the Sketcher constraints sub menu of the Sketcher or Part Design menus (depending upon whether the Sketcher or Part Design workbench is selected) to apply the constraint to the selected lines.

ConstrainPerpendicular3.png

The lines are constrained to be perpendicular.

Other languages:
čeština • ‎Deutsch • ‎English • ‎español • ‎français • ‎italiano • ‎polski • ‎português • ‎português do Brasil • ‎русский • ‎svenska