Sketcher: Vincolo Blocca

From FreeCAD Documentation
Revision as of 20:42, 9 October 2018 by Renatorivo (talk | contribs) (Created page with "Il vincolo '''Blocca''' applica un vincolo 24px Distanza orizzontale e un vincolo File:Constrai...")
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.

Blocca

Posizione nel menu
PartDesign → Schizzo → Blocca
Ambiente
Schizzo
Avvio veloce
Nessuno
Introdotto nella versione
-
Vedere anche
Fissa

Descrizione

Il vincolo Blocca applica un vincolo Distanza orizzontale e un vincolo Distanza verticale ai vertici (punti) selezionati nello schizzo. Se viene selezionato un singolo vertice, i vincoli di distanza orizzontale e verticale si riferiscono al punto di origine dello schizzo. Se vengono selezionati due o più punti, verranno aggiunti i vincoli di distanza orizzontale e verticale per ogni coppia di punti. Non esiste un sistema automatico per modificare i valori dei vincoli, essi devono essere modificati manualmente.


Utilizzo

  1. Select one or more vertices (points) in the sketch.
  2. Press the Constrain Lock button.
  3. To edit the constraints values, double-click on a constraint value in the 3D view, or double-click on the constraint or right-click and select Edit value in the Constraint list in the Tasks tab.

Note: the constraint tool can also be started with no prior selection, but it will then only work on a single vertex, and reference the constraints to the sketch origin point. By default the command will be in continue mode to create new constraints; press the right mouse button or ESC once to quit the command.