Difference between revisions of "Sketcher ConstrainLock/it"

From FreeCAD Documentation
Jump to: navigation, search
(Replaced content with "== Utilizzo ==")
(Updating to match new version of source page)
Line 13: Line 13:
 
# To edit the constraints values, double-click on a constraint value in the 3D view, or double-click on the constraint or right-click and select '''Edit value''' in the Constraint list in the Tasks tab.
 
# To edit the constraints values, double-click on a constraint value in the 3D view, or double-click on the constraint or right-click and select '''Edit value''' in the Constraint list in the Tasks tab.
  
'''Note:''' the constraint tool can also be started with no prior selection, but it will then only work on a single vertex, and reference the constraints to the sketch origin point.
+
'''Note:''' the constraint tool can also be started with no prior selection, but it will then only work on a single vertex, and reference the constraints to the sketch origin point. By default the command will be in continue mode to create new constraints; press the right mouse button or {{KEY|ESC}} once to quit the command.

Revision as of 03:39, 3 October 2018

Other languages:
čeština • ‎Deutsch • ‎English • ‎español • ‎français • ‎italiano • ‎polski • ‎português • ‎português do Brasil • ‎română • ‎русский • ‎svenska

Sketcher ConstrainLock.svg Blocca

Posizione nel menu
PartDesign → Schizzo → Blocca
Ambiente
Schizzo
Avvio veloce
Nessuno
Introdotto nella versione
-
Vedere anche
Fissa


Descrizione

Constraint Lock applies Sketcher ConstrainDistanceX.png Horizontal distance and Sketcher ConstrainDistanceY.png Vertical distance constraints to selected vertices (points) in the sketch. If a single vertex is selected, the horizontal and vertical distance constraints will refer to the sketch origin point. If two or more points are selected, horizontal and vertical distance constraints will be added for each pair of points. There is no automatic prompt to edit the constraints' values, they must be edited manually.


Utilizzo

  1. Select one or more vertices (points) in the sketch.
  2. Press the Sketcher ConstrainLock.png Constrain Lock button.
  3. To edit the constraints values, double-click on a constraint value in the 3D view, or double-click on the constraint or right-click and select Edit value in the Constraint list in the Tasks tab.

Note: the constraint tool can also be started with no prior selection, but it will then only work on a single vertex, and reference the constraints to the sketch origin point. By default the command will be in continue mode to create new constraints; press the right mouse button or ESC once to quit the command.