Constraint Horizontal

From FreeCAD Documentation
Revision as of 20:01, 2 August 2018 by FuzzyBot (talk | contribs) (Updating to match new version of source page)

Constraint Horizontal

Menyplacering
Sketch → Sketcher constraints → Constrain horizontally
Arbetsbänkar
Sketcher, PartDesign
Standard genväg
Ingen
Introducerad i version
-
Se även
Constraint Vertical

Description

The Horizontal Constraint forces a selected line or lines in the image to be parallel to the horizontal axis of the sketch.

Operation

Select a line in the sketch by clicking on it.

The line turns dark green.

Apply the Horizontal Constraint by clicking on the Horizontal Constraint icon in the Sketcher Constraints toolbar or by selecting the Constrain horizontally menu item in the Sketcher constraints sub menu of the Sketcher menu item in the Sketcher work bench (or the Part Design menu item of the Part Design work bench). The selected line is constrained to be parallel to the horizontal axis of the sketch.

Multiple lines may be selected,

and then applying the constraint as described above, they are constrained to be parallel to the sketch horizontal axis.