Sketcher: Vincolo Uguale

From FreeCAD Documentation
Revision as of 17:19, 22 December 2013 by Renatorivo (talk | contribs) (Created page with "Il vincolo Uguale forza due o più segmenti di linea in una linea, in una polilinea o in un rettangolo ad avere uguale lunghezza. Se applicato a archi o cerchi, vincola uguali...")
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.

Uguale

Posizione nel menu
PartDesign → Schizzo → Uguale
Ambiente
Schizzo, PartDesign
Avvio veloce
Nessuno
Introdotto nella versione
-
Vedere anche
Raggio

Il vincolo Uguale forza due o più segmenti di linea in una linea, in una polilinea o in un rettangolo ad avere uguale lunghezza. Se applicato a archi o cerchi, vincola uguali i raggi. Non può essere applicato a geometrie primitive che non sono dello stesso tipo, ad esempio segmenti con archi.

Operation

The example sketch below contains a number of sketch primitives ( line,poly-line, rectangle, arc and circle).



Select two or more line segments (e.g. line and one side of the rectangle).



Click on the Constrain Equal icon in the Sketcher toolbar (in either the Sketcher or Part Design workbenches) or select the Constrain Equal menu item from the Sketcher constraints sub menu item in either the Sketch or Part Design menu item depending upon which workbench is selected (Sketcher or Part Design) to apply the constraint to the selected items.



Now select the arc and the circle in the sketch.



and apply the Constrain Equal constraint as before.



Now select the line segment, all segments of the poly-line and one of the remaining unconstrained sides of the rectangle



and apply the Constrain Equal constraint as before.



Select the line segment and the arc



and apply the Constrain Equal constraint as before. A pop-up message indicates that the constrained items have to be of the same geometrical type (lines of zero curvature or lines of non-zero curvature).