Sketcher: Vincolo Uguale

From FreeCAD Documentation
Revision as of 19:19, 22 December 2013 by Renatorivo (talk | contribs) (Created page with "Il vincolo Uguale forza due o più segmenti di linea in una linea, in una polilinea o in un rettangolo ad avere uguale lunghezza. Se applicato a archi o cerchi, vincola uguali...")
Jump to: navigation, search

Constraint EqualLength.svg Uguale

Posizione nel menu
PartDesign → Schizzo → Uguale
Ambiente
Schizzo, PartDesign
Avvio veloce
Nessuno
Introdotto nella versione
-
Vedere anche
Raggio

Contents


Il vincolo Uguale forza due o più segmenti di linea in una linea, in una polilinea o in un rettangolo ad avere uguale lunghezza. Se applicato a archi o cerchi, vincola uguali i raggi. Non può essere applicato a geometrie primitive che non sono dello stesso tipo, ad esempio segmenti con archi.

Operation

The example sketch below contains a number of sketch primitives ( line,poly-line, rectangle, arc and circle).

EqualConstraint1.png

Select two or more line segments (e.g. line and one side of the rectangle).

EqualConstraint2.png

Click on the Constrain Equal icon Sketcher ConstrainEqual.png in the Sketcher toolbar (in either the Sketcher or Part Design workbenches) or select the Constrain Equal menu item from the Sketcher constraints sub menu item in either the Sketch or Part Design menu item depending upon which workbench is selected (Sketcher or Part Design) to apply the constraint to the selected items.

EqualConstraint3.png

Now select the arc and the circle in the sketch.

EqualConstraint4.png

and apply the Constrain Equal Sketcher ConstrainEqual.png constraint as before.

EqualConstraint5.png

Now select the line segment, all segments of the poly-line and one of the remaining unconstrained sides of the rectangle

EqualConstraint6.png

and apply the Constrain Equal Sketcher ConstrainEqual.png constraint as before.

EqualConstraint7.png

Select the line segment and the arc

EqualConstraint8.png

and apply the Constrain Equal Sketcher ConstrainEqual.png constraint as before. A pop-up message indicates that the constrained items have to be of the same geometrical type (lines of zero curvature or lines of non-zero curvature).

EqualConstraint9.png

Other languages:
čeština • ‎Deutsch • ‎English • ‎español • ‎français • ‎italiano • ‎日本語 • ‎polski • ‎português • ‎português do Brasil • ‎română • ‎русский • ‎svenska