Sketcher "Ограничение расстояния по вертикали"

From FreeCAD Documentation
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.
This page is a translated version of the page Sketcher ConstrainDistanceY and the translation is 57% complete.
Outdated translations are marked like this.

Ограничение расстояния по вертикали

Системное название
Sketcher_ConstrainDistanceY
Расположение в меню
Sketch → Ограничения эскиза → Ограничение расстояния по вертикали
Верстаки
Sketcher
Быстрые клавиши
I
Представлено в версии
-
См. также
Ограничение расстояния по горизонтали, Ограничить расстояние

Описание

Фиксирует вертикальное расстояние между 2 точками или концами отрезка. Если выбрана только одна точка, расстояние устанавливается в точки центра координат эскиза.

Применение

  1. Pick one or two points or one line.
  2. Invoke the command several ways:
    • Press the Constrain vertical distance button.
    • Use the I keyboard shortcut.
    • Use the Sketch → Sketcher constraints → Constrain vertical distance entry from the top menu.
  3. A pop up dialog opens to edit or confirm the value. Press OK to validate.

Note: the constraint tool can also be started with no prior selection, but will require selection of two points or one line. To set the distance to the origin, the sketch origin point needs to be selected as well. By default the command will be in continue mode to create new constraints; press the right mouse button or Esc once to quit the command.

Программирование

Расстояние от начала координат:

Sketch.addConstraint(Sketcher.Constraint('DistanceY', Edge, PointOfEdge, -1, 1, App.Units.Quantity('123.0 mm')))

Расстояние между двумя вершинами:

Sketch.addConstraint(Sketcher.Constraint('DistanceY', Edge1, PointOfEdge1, Edge2, PointOfEdge2, App.Units.Quantity('123.0 mm')))

Vertical span of line (the GUI allows selecting the edge itself, but it is just a shorthand for using the two extremities of the same line):

Sketch.addConstraint(Sketcher.Constraint('DistanceY', Line, 1, Line, 2, App.Units.Quantity('123.0 mm')))

The Sketcher scripting page explains the values which can be used for Edge, Edge1, Edge2, PointOfEdge, PointOfEdge1, PointOfEdge2 and Line, and contains further examples on how to create constraints from Python scripts.