Sketcher ConstrainDistanceY/es

From FreeCAD Documentation
Revision as of 14:34, 19 February 2019 by FuzzyBot (talk | contribs) (Updating to match new version of source page)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search
Other languages:
čeština • ‎Deutsch • ‎English • ‎español • ‎français • ‎italiano • ‎polski • ‎português • ‎português do Brasil • ‎română • ‎русский • ‎svenska

Sketcher ConstrainDistanceY.png Sketcher ConstrainDistanceY

Ubicación en el Menú
Croquizador → Restricciones del Croquizador→ Distancia Vertical
Entornos de trabajo
Croquizador
Atajo de teclado por defecto
May+V
Introducido en versión
-
Ver también
Distancia Horizontal, Distancia


Description

Fixes the vertical distance between 2 points or line ends. If only one point is selected, the distance is set to the sketch origin.

Sketcher ConstraintDistanceY example.png

How to use

  1. Pick one or two points or one line.
  2. Press the Sketcher ConstrainDistanceY.png Constrain vertical distance button.
  3. A pop up dialog opens to edit or confirm the value. Press OK to validate.

Note: the constraint tool can also be started with no prior selection, but will require selection of two points or one line. To set the distance to the origin, the sketch origin point needs to be selected as well. By default the command will be in continue mode to create new constraints; press the right mouse button or ESC once to quit the command.