Sketcher ConstrainDistanceY/es: Difference between revisions

From FreeCAD Documentation
No edit summary
(Updating to match new version of source page)
(One intermediate revision by the same user not shown)
Line 1: Line 1:
<languages/>
<languages/>
{{Docnav|[[Sketcher ConstrainDistanceX|Horizontal Distance]]|[[Sketcher_ConstrainDistance|Distance]]|[[Sketcher_Workbench|Sketcher]]|IconL=Constraint_HorizontalDistance.png‎|IconC=Workbench_Sketcher.svg|IconR=Constraint_Length.png}}

{{GuiCommand/es
{{GuiCommand/es
|Name=Sketcher ConstrainDistanceY
|Name=Sketcher ConstrainDistanceY
Line 10: Line 12:


==Description==
==Description==

Fixes the vertical distance between 2 points or line ends. If only one point is selected, the distance is set to the sketch origin.
Fixes the vertical distance between 2 points or line ends. If only one point is selected, the distance is set to the sketch origin.


[[File:Sketcher ConstraintDistanceY example.png|none]]
[[File:Sketcher ConstraintDistanceY example.png|none]]


==Usage==
==How to use==

# Pick one or two points or one line.
# Pick one or two points or one line.
# Press the {{KEY|[[File:Sketcher ConstrainDistanceY.png|24px]] '''Constrain vertical distance'''}} button.
# Press the {{KEY|[[File:Sketcher ConstrainDistanceY.png|24px]] '''Constrain vertical distance'''}} button.
Line 20: Line 24:


'''Note:''' the constraint tool can also be started with no prior selection, but will require selection of two points or one line. To set the distance to the origin, the sketch origin point needs to be selected as well. By default the command will be in continue mode to create new constraints; press the right mouse button or {{KEY|ESC}} once to quit the command.
'''Note:''' the constraint tool can also be started with no prior selection, but will require selection of two points or one line. To set the distance to the origin, the sketch origin point needs to be selected as well. By default the command will be in continue mode to create new constraints; press the right mouse button or {{KEY|ESC}} once to quit the command.

{{Docnav|[[Sketcher ConstrainDistanceX|Horizontal Distance]]|[[Sketcher_ConstrainDistance|Distance]]|[[Sketcher_Workbench|Sketcher]]|IconL=Constraint_HorizontalDistance.png‎|IconC=Workbench_Sketcher.svg|IconR=Constraint_Length.png}}

{{Sketcher Tools navi}}

{{Userdocnavi}}


{{clear}}
{{clear}}

Revision as of 13:34, 19 February 2019

Sketcher ConstrainDistanceY

Ubicación en el Menú
Croquizador → Restricciones del Croquizador→ Distancia Vertical
Entornos de trabajo
Croquizador
Atajo de teclado por defecto
May+V
Introducido en versión
-
Ver también
Distancia Horizontal, Distancia

Description

Fixes the vertical distance between 2 points or line ends. If only one point is selected, the distance is set to the sketch origin.

How to use

  1. Pick one or two points or one line.
  2. Press the Constrain vertical distance button.
  3. A pop up dialog opens to edit or confirm the value. Press OK to validate.

Note: the constraint tool can also be started with no prior selection, but will require selection of two points or one line. To set the distance to the origin, the sketch origin point needs to be selected as well. By default the command will be in continue mode to create new constraints; press the right mouse button or ESC once to quit the command.