Croquizador RestringirDistancia

From FreeCAD Documentation
Revision as of 13:34, 19 February 2019 by FuzzyBot (talk | contribs) (Updating to match new version of source page)

Restricción de distancia

Ubicación en el Menú
Sketch → Restricciones de croquis → Restricción de distancia
Entornos de trabajo
Croquizador
Atajo de teclado por defecto
May + D
Introducido en versión
-
Ver también
Distancia Horizontal, Distancia Vertical

Descripción

La Restricción de Distancia restringe la longitud de una línea, la distancia perpendicular entre un punto y una línea o la distancia entre dos puntos a un valor específico.

Utilización

  1. Pick two points or one line or one point and one line.
  2. Press the Constrain distance button.
  3. A pop up dialog opens to edit or confirm the value. Press OK to validate.

Note: the constraint tool can also be started with no prior selection. To set the perpendicular distance between a point and a line, the point needs to be selected first. By default the command will be in continue mode to create new constraints; press the right mouse button or ESC once to quit the command.

Hint

If applicable please consider using the Horizontal distance or Vertical distance constraints instead. These constraints are more robust and faster to calculate than the here documented length constraint.