Sketcher ConnectLines/it: Difference between revisions

From FreeCAD Documentation
(Created page with "====Descrizione====")
(Updating to match new version of source page)
Line 2: Line 2:
{{GuiCommand/it|Name=Sketcher ConnectLines|Name/it=Collega Segmenti|Workbenches=[[Sketcher Workbench/it|Sketcher]]|MenuLocation=Sketch → Sketcher tools → Collega Segmenti|Shortcut=Maiusc+Ctrl+K|SeeAlso=}}
{{GuiCommand/it|Name=Sketcher ConnectLines|Name/it=Collega Segmenti|Workbenches=[[Sketcher Workbench/it|Sketcher]]|MenuLocation=Sketch → Sketcher tools → Collega Segmenti|Shortcut=Maiusc+Ctrl+K|SeeAlso=}}


====Descrizione====


[[Category:UnfinishedDocu]]
====Descrizione====


====Notes====
Before using this command make sure that obvious constraints (horizontal, vertical, tangential) are already applied to the elements.
Selecting the elements in a counter-clock-wise order seems to produce better results.


[[Category:UnfinishedDocu]]
[[Category:UnfinishedDocu]]

Revision as of 22:23, 5 May 2015

Collega Segmenti

Posizione nel menu
Sketch → Sketcher tools → Collega Segmenti
Ambiente
Sketcher
Avvio veloce
Maiusc+Ctrl+K
Introdotto nella versione
-
Vedere anche
Nessuno

Descrizione

Notes

Before using this command make sure that obvious constraints (horizontal, vertical, tangential) are already applied to the elements. Selecting the elements in a counter-clock-wise order seems to produce better results.