Difference between revisions of "Sketcher ConnectLines"
| Line 11: | Line 11: | ||
====Notes==== <!--T:4--> | ====Notes==== <!--T:4--> | ||
| + | Before using this command make sure that obvious constraints (horizontal, vertical, tangential) are already applied to the elements. | ||
| + | Selecting the elements in a counter-clock-wise order seems to produce better results. | ||
<!--T:5--> | <!--T:5--> | ||
Revision as of 18:12, 5 May 2015
|
|
| Menu location |
|---|
| Sketch → Sketcher tools → Connect Edges |
| Workbenches |
| Sketcher |
| Default shortcut |
| Maiusc+Ctrl+K |
| Introduced in version |
| - |
| See also |
Contents |
Description
Applies PointOnPoint-Constraints to endpoints with the same coordinates of the selected elements.
Usage
Select the elements in the 3D-view or in the listbox on the left side of the screen and click on the icon.
Notes
Before using this command make sure that obvious constraints (horizontal, vertical, tangential) are already applied to the elements. Selecting the elements in a counter-clock-wise order seems to produce better results.
