Sketcher CompCreateConic: Difference between revisions

From FreeCAD Documentation
(Marked this version for translation)
(|Icon=Sketcher_CompCreateConic.png)
Line 4: Line 4:
{{GuiCommand
{{GuiCommand
|Name=Sketcher Conics
|Name=Sketcher Conics
|Icon=Sketcher_CompCreateConic.png
|Workbenches=[[Sketcher Workbench|Sketcher]]
|Workbenches=[[Sketcher Workbench|Sketcher]]
|MenuLocation=None (toolbar only)
|MenuLocation=None (toolbar only)

Revision as of 20:03, 17 February 2019

Sketcher Conics

Menu location
None (toolbar only)
Workbenches
Sketcher
Default shortcut
None
Introduced in version
-
See also
None

Description

Create a conic is an icon button in the Sketcher geometries toolbar that groups tools to create curves based on a section of a cone. Click on the down arrow to its right to expand the icons below it and select a tool.

Types of conics

  • Ellipse by center : Draws an ellipse by center point, major radius point and minor radius point.
  • Ellipse by 3 points : Draws an ellipse by major diameter (2 points) and minor radius point.
  • Arc of ellipse : Draws an arc of ellipse by center point, major radius point, starting point and ending point.
  • Arc of hyperbola: v0.17 and above Draws an arc of hyperbola.
  • Arc of parabola: v0.17 and above Draws an arc of parabola.