Sketcher CompCreateArc/de
Sketcher Bogen |
Menüeintrag |
---|
Keine (nur Symbolleiste) |
Arbeitsbereich |
Sketcher |
Standardtastenkürzel |
Keiner |
Eingeführt in Version |
- |
Siehe auch |
Keiner |
Beschreibung
Bogen erstellen ist eine Piktogrammfläche in der Sketch-Geometrien-Werkzeugleiste, die Werkzeuge zur Erstellung eines Kreisbogens aus drei Punkten gruppiert. Klicke auf den Pfeil rechts neben dem Piktogramm, um das Drop-Down-Menü anzuzeigen und ein Werkzeug auszuwählen.
Types of arcs
- Arc by Center and end points : Draws an arc by picking three points: the center, the start angle along the radius, and the end angle.
- Arc by end points and rim point : Draws an arc by picking three points: the start point, the end point and a point on the arc.