Sketcher CompCreateArc/de: Difference between revisions
(Created page with "{{GuiCommand/de |Name/de=Sketcher Bogen |Empty=1 |Workbenches=Sketcher |MenuLocation=Keine (nur Symbolleiste) }}") |
(Created page with "<small>Status: FreeCAD-Version 0.16</small> ==Beschreibung==") |
||
Line 7: | Line 7: | ||
}} |
}} |
||
<small>Status: FreeCAD-Version 0.16</small> |
|||
==Description== |
|||
==Beschreibung== |
|||
'''Create an arc''' is an icon button in the Sketcher geometries toolbar that groups tools to create an arc by picking three points. Click on the down arrow to its right to expand the icons below it and select a tool. |
'''Create an arc''' is an icon button in the Sketcher geometries toolbar that groups tools to create an arc by picking three points. Click on the down arrow to its right to expand the icons below it and select a tool. |
Revision as of 03:33, 5 November 2018
Sketcher Bogen |
Menüeintrag |
---|
Keine (nur Symbolleiste) |
Arbeitsbereich |
Sketcher |
Standardtastenkürzel |
Keiner |
Eingeführt in Version |
- |
Siehe auch |
Keiner |
Status: FreeCAD-Version 0.16
Beschreibung
Create an arc is an icon button in the Sketcher geometries toolbar that groups tools to create an arc by picking three points. Click on the down arrow to its right to expand the icons below it and select a tool.
Types of arcs
- Arc by Center and end points : Draws an arc by picking three points: the center, the start angle along the radius, and the end angle.
- Arc by end points and rim point : Draws an arc by picking three points: the start point, the end point and a point on the arc.