Sketcher CloseShape/ro: Difference between revisions
Renatorivo (talk | contribs) (Replaced content with "==Descriere==") |
Renatorivo (talk | contribs) (Created page with "Acest instrument poate fi folosit pentru a închide un contur selectat în Sketcher, făcând ca un punct final al unui element Sketcher să coincidă cu punctul final al urm...") |
||
Line 4: | Line 4: | ||
==Descriere== |
==Descriere== |
||
Acest instrument poate fi folosit pentru a închide un contur selectat în Sketcher, făcând ca un punct final al unui element Sketcher să coincidă cu punctul final al următorului element sketcher selectat. |
|||
This tool can be used to make a selected contour in sketcher closed by making an endpoint of a sketcher element coincident with the endpoint of the sketcher element selected next. |
|||
<div class="mw-translate-fuzzy"> |
<div class="mw-translate-fuzzy"> |
Revision as of 21:22, 2 December 2018
Sketcher CloseShape |
Menu location |
---|
Sketch → Sketcher tools → Close Shape |
Workbenches |
Sketcher |
Default shortcut |
Shift+Ctrl+S |
Introduced in version |
0.15 |
See also |
None |
Descriere
Acest instrument poate fi folosit pentru a închide un contur selectat în Sketcher, făcând ca un punct final al unui element Sketcher să coincidă cu punctul final al următorului element sketcher selectat.
Folosire
În timp ce modificați o schiță, selectați multi-elementul sketcher în vizualizarea arborescentă sau în vizualizarea 3D și dați clic pe pictogramă sau utilizați "Sketch > Sketcher Tools > Close Shape" from the FreeCAD-Menu sau utilizați <CTRL+Shift+S>.
While editing a sketch, multi-select your sketcher elements in the tree-view or in the 3D-View and click on the icon or use "Sketch > Sketcher Tools > Close Shape" from the FreeCAD-Menu or use <CTRL+Shift+S>.
Notă
Instrumentul va conecta elementele în ordinea alegerii lor, deci asigurați-vă că faceți clic și selectați în ordinea corectă.
The tool will connect the elements in the order of their selection, so make sure to click and select in the correct order.