Sketch: Chiudi la forma

From FreeCAD Documentation
Revision as of 21:16, 2 December 2018 by Renatorivo (talk | contribs) (Replaced content with "== Utilizzo ==")

Chiudi la forma

Posizione nel menu
Sketch → Strumenti → Chiudi la forma
Ambiente
Sketcher
Avvio veloce
Maiusc+Ctrl+S
Introdotto nella versione
-
Vedere anche
Nessuno

Descrizione

Questo strumento può essere usato in Sketcher per chiudere un contorno selezionato impostando un punto finale di un elemento coincidente con il punto finale del successivo elemento selezionato.

Utilizzo

While editing a sketch, multi-select your sketcher elements in the tree-view or in the 3D-View and click on the icon or use "Sketch > Sketcher Tools > Close Shape" from the FreeCAD-Menu or use <CTRL+Shift+S>.

Note

Lo strumento collega gli elementi secondo l'ordine di selezione, quindi cliccare e selezionare nell'ordine corretto.

The tool will connect the elements in the order of their selection, so make sure to click and select in the correct order.