Eskiz Klonla
Eskiz Klonla |
Menü konumu |
---|
Eskiz → Eskiz araçları → Klonla |
Tezgahlar |
Eskiz |
Varsayılan kısayol |
Hiçbiri |
Versiyonda tanıtıldı |
0.16 |
Ayrıca bkz |
Eskiz Kopyala, Eskiz Taşı |
Açıklama
Clones the selected sketch elements from one point to another, using the last selected point as reference. If any constraints are part of the source elements, then the new constraints are linked to the source constraints; if the constraints in the source are changed, the constraints in the clone are also changed. To avoid this linking see Sketcher Copy.
Note that a clone of a clone becomes a Sketcher Copy. If you wish to create linked constraints, clone the original source elements again.
How to use
- Select the sketch elements to clone.
- Click on or choose Sketch → Sketcher tools → Clone from the top menu.
- Place clone in the 3D-View.
No extra constraints for clone-behaviour are added.