Sketcher Clonă

From FreeCAD Documentation
Revision as of 16:07, 19 February 2019 by FuzzyBot (talk | contribs) (Updating to match new version of source page)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search
Other languages:
Deutsch • ‎English • ‎español • ‎français • ‎hrvatski • ‎italiano • ‎română • ‎русский • ‎Türkçe
Arrow-left.svg Previous: Sketcher Symmetry.png Symmetry
Next: Copy Sketcher Copy.png Arrow-right.svg

Sketcher Clone.svg Sketcher Clonă

poziția meniului
Sketch → Sketcher tools → Clonă
Workbenches
Sketcher
scurtătură
nici unul
Prezentat în versiune
0.16
A se vedea, de asemenea,
Sketcher Copiere, Sketcher Move


Descriere

Clonează un element sketcher.

Clones the selected sketch elements from one point to another, using the last selected point as reference. If any constraints are part of the source elements, then the new constraints are linked to the source constraints; if the constraints in the source are changed, the constraints in the clone are also changed. To avoid this linking see Sketcher Copy.

Note that a clone of a clone becomes a Sketcher Copy. If you wish to create linked constraints, clone the original source elements again.

Folosire

  1. Selectați un element sketcher pentru clonare.
  2. Click pe Sketcher Clone.png or choose Sketch Sketcher toolsSketcher Clone.png Clone din meniul principal.
  3. Plasați clona în vizualizarea 3D.

Nu sunt adăugate extra constrâgeri pentru compartamentul clonei.


Arrow-left.svg Previous: Sketcher Symmetry.png Symmetry
Next: Copy Sketcher Copy.png Arrow-right.svg