Sketcher Clone/ro: Difference between revisions

From FreeCAD Documentation
(Updating to match new version of source page)
(Replaced content with "==Folosire==")
Line 26: Line 26:
Note that a clone of a clone becomes a Sketcher Copy. If you wish to create linked constraints, clone the original source elements again.
Note that a clone of a clone becomes a Sketcher Copy. If you wish to create linked constraints, clone the original source elements again.


<div class="mw-translate-fuzzy">
==Folosire==
==Folosire==
#Selectați un element sketcher pentru clonare.
#Click pe [[Image:Sketcher_Clone.png|32px]] or choose {{KEY| Sketch}} → {{KEY| Sketcher tools}} → {{KEY|[[Image:Sketcher_Clone.png|32px]] Clone}} din meniul principal.
#Plasați clona în vizualizarea 3D.
Nu sunt adăugate extra constrâgeri pentru compartamentul clonei.
</div>


#Select the sketch elements to clone.
#Select the sketch elements to clone.

Revision as of 19:39, 2 December 2018

Sketcher Clonă

poziția meniului
Sketch → Sketcher tools → Clonă
Ateliere
Sketcher
scurtătură
nici unul
Prezentat în versiune
0.16
A se vedea, de asemenea,
Sketcher Copiere, Sketcher Move

Descriere

Clonează un element sketcher.

Clones the selected sketch elements from one point to another, using the last selected point as reference. If any constraints are part of the source elements, then the new constraints are linked to the source constraints; if the constraints in the source are changed, the constraints in the clone are also changed. To avoid this linking see Sketcher Copy.

Note that a clone of a clone becomes a Sketcher Copy. If you wish to create linked constraints, clone the original source elements again.

Folosire

  1. Select the sketch elements to clone.
  2. Click on or choose Sketch Sketcher tools Clone from the top menu.
  3. Place clone in the 3D-View.

No extra constraints for clone-behaviour are added.