Sandbox:Piffpoof7

From FreeCAD Documentation
Revision as of 09:31, 24 January 2016 by Piffpoof (talk | contribs) (Issues:)
Jump to: navigation, search

FreeCAD GUI for Data Manipulation

Background

The GUI for numeric data entry in FreeCAD is a versatile entity. Unfortunately it contains various inconsistencies which frustrate new (and old) users. This is a list of some of those bugs.

Method

A list of bugs appears later in this document. To demonstrate and explain them a collection of objects will be used, a screen snapshot of the objects in the Combo View is shown here and a FCStd file will be attached with the example objects.

ScreenSnapshot1.jpg

This page is a "work in progress" and will be extended as necessary. Most likely the object collection (and screen snapshot and FCStd file) will have to be expanded and so will be updated as necessary.

Note: It is not known if these 'bugs' are hard fails or possibly intermittent; also it is not known if some of them may be platform specific. This list is created from FreeCAD v 0.14 on Macintosh computer.

Issues:

The format for these issues is a numbered entry for each issue, and then within that numbered point, a bullet point for the issue description followed by a bullet point with the steps to create the issue. Optionally there is a third bulledt point with discussion points


  1. Level of expansion for Data tab in Combo View is inconsistent
    • if user has Position drop-down expanded then it should not close when he selects a different object
    • Steps to Create:
      1. open example file
      2. open Views->Combo View
      3. click the Data tab
      4. click on Cube1 to Select it
      5. click on the drop-down icon to the left of Position - the positional data for Cube1 should appear
      6. click on Cylinder1 - the pop-down data for Position will not appear
    • When working with the alignment of different objects this is very annoying.


  1. New object should switch selection to new object (view zooms to display new object, but browser doesn't Select it)
  2. Erratic Selection
    • Selection is not always predictable, sometimes there are multiple selections, this leaves the user unsure of which object an action will act upon
  3. Erratic Selection after drag/drop
    • having to click twice to reset Selection
  4. is math ability in X,Y,Z documented?
    • 400 + -17 may be entered into the X, Y,Z coordinates, is this documented?
  5. is there a way to reset "800-170" in X,Y,Z to "630"?
    • after using 400 + -17 to relocate an object, is there a method for the user to reset the field value to 383?
  6. deleting a Compound object places the component objects at the end of the list
  7. inability to drag/drop objects in Combo View Model tab to place in order
  8. right-click on Combo View Model tab to sort objects alphabetically
  9. business with negative sign, comma in data entry
  10. roll over from -9,999 mm to -1.1 m (looses place)
  11. erratic Undo
  12. Return doesn't always put X,Y,Z into Edit mode
  13. does Combo View scroll when you need to drag something from the bottom to the top and the top is off the top of the display?
  14. drag/drop must be onto folder, will not accept a member of that folder