Note di rilascio della versione 0.13

From FreeCAD Documentation
Revision as of 07:34, 31 August 2012 by Psi13art (talk | contribs)
traduzione provvisoria (renatorivo).

Note alla versione 0.13

Questo è un riassunto dei cambiamenti più interessanti avvenuti in FreeCAD con la versione più recente. Vedere qui per la lista completa delle modifiche.

Versioni precedenti: 0.12 - 0.11 (en)

modellato in FreeCAD da psicofil


Generale

  • Preferenze di colore: siete stufi del buon vecchio (forme-grige-con-linee-nere) aspetto predefinito di FreeCAD? Ora è modificabile nelle preferenze utente (Visualizza -> Colore), insieme a diversi altri colori predefiniti.

Modulo Disegno

  • Operazione Ritaglio: Un nuovo oggetto di Ritaglio consente di posizionare le viste di oggetti all'interno di rettangoli ritagliati nelle pagine di disegno.
  • Blocchi di titoli editabili: Durante la progettazione di Modelli di disegno, ora è possibile marcare i testi modificabili. Tali testi diventano quindi direttamente modificabili in FreeCAD.
  • Operazione Annotazione: Un nuovo oggetto Disegna Annotazione, una semplice funzione per posizionare rapidamente blocchi di testo in una pagina di disegno.

Modulo Schizzo

Miglioramenti per le Etichette dei dati e i Vincoli di visualizzazione:

  • Each constraint label (including arrows) will correctly scale to the size of the scene automtically to the 3D viewport
  • Datum label text for Distance, Distance X, Distance Y and Radius can be freely positioned now with greater control.
  • Small improvements to overlapping constraint icons and freezing.
  • Datum Label text will reverse when the view is orientated from the opposite side.
  • Rubber band selection.(Is this currently available?)

Modulo Draft

  • Taskmode: The Taskview mode of the Draft module is now default. Fear not, if you liked the toolbar, it is still available in the Draft preferences settings.
  • DXF importer: The DXF importer now supports points (translate to Draft Point) and leaders (translate to Draft Wires
  • Brand-new snapping system: The snapping system of the Draft module has been rewritten almost from scratch. It is now much easier to extend and use in other scripts and modules, has now new visuals with snap cursor icons, and a toolbar that allows to switch on/off individual snap locations or the whole snapping system.

  • Better constraining: When entering 3D points, besides the existing Shift-constraining, you can now constrain the movement in X, Y or Z direction by pressing the X, Y or Z keys. Pressing them again switches constraining off.
  • Draft <-> Sketch conversion: The Draft workbench now features a new Draft2Sketch conversion tool, that converts selected Draft objects (or any flat shape) to Sketches, and vice-versa.
  • Clone tool: Make copies of selected objects with this handy tool. When the original changes, the clone gets updated automatically. The clone can be moved, rotated, and also has a scale property that allows you to change the size of the copy.
  • SVG importer: The SVG importer now has much better support of bezier curves.
  • Curved corners: Several Draft objects (Wires, Rectangles and Polygons) now have a Fillet Radius property, which curves their corners by the given radius value.

  • 2D view object: The new Shape2DView tool allows to quickly place a 2D view of a selected object in the document. You can specify the projection vector.

Modulo Architettura

  • Draft integration: The Arch and Draft modules are now tightly integrated. The Arch tools use the Draft snapping system, and all the Draft tools are present in the Arch workbench. In fact, if you like, you can now completely switch off the Draft module (Preferences -> Draft -> Hide the Draft workbench)
  • New wall tool: The wall tool has been greatly enhanced, and now features a direct drawing mode, that is activated when you press the Wall button with no object selected, that allows you to draw walls like you draw simple lines. In additions, walls now auto-connect when you snap to an existing wall.

  • New roof tool: A new roof tool is now available in the Arch module, that allows you to quickly create sloped roofs from a selected face.
  • New sections system: It is now very simple to create 2D plans, sections and elevations from your model: Place a Section Plane object, orient it the way you want, edit it to include the objects it must see, and you are done!
  • New solid renderer: In addition to the OpenCasCADe-based wireframe 2D renderer currently used by the Drawing Module, the Arch module now features a new 2D renderer, that is able to render filled faces to a SVG Drawing sheet, giving much nicer 2D views.

  • IFC import with IfcOpenShell: The Arch module can now use IfcOpenShell if it is installed on your system. This allows for much more powerful IFC import, and all the contents of the IFC file are guaranteed to be imported.
  • New floor and building objects: Building and floors are now groups, so you can add and remove objects from them with a simple drag&drop from the tree view.
  • New axes system: A new axes system feature has been added, that allows to quickly layout complex axes systems. These axes can then be added to Structure objects, so they spread automatically on the grid nodes.

  • Arch objects from meshes: Walls and structures can now be made directly from a mesh, provided it is closed, solid and all edges are manifold. This allows for very quick transformation of geometry imported from other applications such as blender into valid Arch objects.

Modulo Navale

  • Nuovo modulo navale


Altre lingue: