Bancada de trabalho Raytracing

From FreeCAD Documentation
Revision as of 17:36, 16 June 2019 by Fael folow (talk | contribs) (Created page with "Uma nova bancada Render está em desenvolvimento para suportar múltiplos back-ends como o Lux Renderer e o Yafaray. Informações para usar a versão de desenvolvimento podem...")

Introdução

A Bancada de Trabalho Raytracing é usada para gerar imagens fotorrealistas de seus modelos, processando-os com um renderizador externo.

A bancada Raytracing trabalha com templates, que são arquivos de projeto que definem uma cena para seu modelo 3D. Você pode colocar luzes e geometrias, como planos de base, e também contém espaços reservados para a posição da câmera e para as informações do material dos objetos na cena. O projeto pode ser exportado para um arquivo pronto para renderização ou renderizado diretamente no FreeCAD.

Atualmente, dois renderizadores são suportados: povray e luxrender. Para poder renderizar a partir do FreeCAD, pelo menos um desses programas deve ser instalado e configurado em seu sistema. No entanto, se nenhum renderizador estiver instalado, você ainda poderá exportar um arquivo de projeto para ser renderizado em outro momento.

Uma nova bancada Render está em desenvolvimento para suportar múltiplos back-ends como o Lux Renderer e o Yafaray. Informações para usar a versão de desenvolvimento podem ser visualizadas em Render project. Para o status de desenvolvimento do Módulo Render, procure no projeto Raytracing project.

Typical workflow

  1. Create or open a FreeCAD project, add some solid objects (Part-based or PartDesign-based); meshes are currently not supported.
  2. Create a Raytracing project (povray or luxrender).
  3. Select the objects that you wish to add to the Raytracing project and add them.
  4. Export the project file or render it directly.



Workflow of the Raytracing Workbench; the workbench prepares a project file from a given template, and then calls an external program to produce the actual rendering of the scene. The external renderer can be used independently of FreeCAD.

Tools

Project tools

These are the main tools for exporting your 3D work to external renderers.

  • New PovRay project: Insert new PovRay project in the document
  • New LuxRender project: Insert new LuxRender project in the document
  • Insert part: Insert a view of a Part in a raytracing project
  • Reset camera: Matches the camera position of a raytracing project to the current view
  • Export project: Exports a raytracing project to a scene file for rendering in an external renderer
  • Render: Renders a raytracing project with an external renderer

Utilities

These are helper tools to perform specific tasks manually.

Preferences

  • Preferences: Preferences available in for the Raytracing tools.

Tutorials

Creating a povray file manually

The utility tools described above allow you to export the current 3D view and all of its content to a Povray file. First, you must load or create your CAD data and position the 3D View orientation as you wish. Then choose "Utilities → Export View..." from the raytracing menu.

You will be asked for a location to save the resulting *.pov file. After that you can open it in Povray and render:

As usual in a renderer you can make big and nice pictures:

Scripting

See the Raytracing API example for information on writing scenes programmatically.

Links

POVRay

Luxrender

Future possible renderers to implement

Exporting to Kerkythea

Although direct export to the Kerkythea XML-File-Format is not supported yet, you can export your Objects as Mesh-Files (.obj) and then import them in Kerkythea.

  • if using Kerkythea for Linux, remember to install the WINE-Package (needed by Kerkythea for Linux to run)
  • you can convert your models with the help of the mesh workbench to meshes and then export these meshes as .obj-files
  • If your mesh-export resulted in errors (flip of normals, holes ...) you may try your luck with netfabb studio basic
Free for personal use, available for Windows, Linux and Mac OSX.
It has standard repair tools which will repair you model in most cases.
  • another good program for mesh analysing/repairing is Meshlab
Open Source, available for Windows, Linux and Mac OSX.
It has standard repair tools which will repair you model in most cases (fill holes, re-orient normals, etc.)
  • you can use "make compound" and then "make single copy" or you can fuse solids to group them before converting to meshes
  • remember to set in Kerkythea an import-factor of 0.001 for obj-modeler, since Kerkythea expects the obj-file to be in m (but standard units-scheme in FreeCAD is mm)
Within WIndows 7 64-bit Kerkythea does not seem to be able to save these settings.
So remember to do that each time you start Kerkythea
  • if importing multiple objects in Kerkythea you can use the "File → Merge" command in Kerkythea

Development

Drawing Module/pt-br
Image Module/pt-br