PySide

From FreeCAD Documentation
Revision as of 21:36, 22 December 2014 by Renatorivo (talk | contribs) (Created page with "Quindi, usando il modulo PyQt all'interno di FreeCAD, si ha il controllo completo della sua interfaccia. È possibile ad esempio: * Aggiungere propri pannelli, widget e barre ...")
PySide

Di recente, FreeCAD è stato modificato internamente per usare PySide al posto di PyQt. Questo cambiamento è stato fatto soprattutto per risolvere una questione di licenze, PySide ha una licenza LGPL che è più compatibile con FreeeCAD. A parte questo, PySide funziona esattamente come PyQt, e in genere in FreeCAD si può utilizzare indifferentemente uno dei due, come si preferisce. Se si decide di utilizzare PySide, basta sostituire tutti i "PyQt" con "PySide" nel codice di esempio sottostante. Vedere le Differenze tra PySide e PyQt


PyQt è un modulo di Python che consente alle applicazioni in Python di creare, accedere e modificare le applicazioni Qt. Può essere utilizzato, per esempio, per creare i programmi Qt in Python oppure per accedere e modificare l'interfaccia di un'applicazione Qt in esecuzione, come FreeCAD.

Quindi, usando il modulo PyQt all'interno di FreeCAD, si ha il controllo completo della sua interfaccia. È possibile ad esempio:

  • Aggiungere propri pannelli, widget e barre degli strumenti
  • Aggiungere o nascondere gli elementi nei pannelli già esistenti
  • Modificare, reindirizzare o aggiungere connessioni tra tutti questi elementi

PyQt has an extensive API documentation, and there are many tutorials on the net to teach you how it works.

If you want to work on the FreeCAD interface, the very first thing to do is create a reference to the FreeCAD main window:

import sys
from PySide import QtGui ,QtCore 
app = QtGui.qApp
mw = app.activeWindow()

Then, you can for example browse through all the widgets of the interface:

for child in mw.children():
   print 'widget name = ', child.objectName(), ', widget type = ', child

The widgets in a Qt interface are usually nested into "containers" widgets, so the children of our main window can themselves contain other children. Depending on the widget type, there are a lot of things you can do. Check the API documentation to see what is possible.

Adding a new widget, for example a dockWidget (which can be placed in one of FreeCAD's side panels) is easy:

myWidget = QtGui.QDockWidget()
mw.addDockWidget(QtCore.Qt.RightDockWidgetArea,myWidget)

You could then add stuff directly to your widget:

myWidget.setObjectName("my Nice New Widget")
myWidget.resize(QtCore.QSize(300,100)) # sets size of the widget
label = QtGui.QLabel("Hello World", myWidget) # creates a label
label.setGeometry(QtCore.QRect(50,50,200,24)) # sets its size
label.setObjectName("myLabel") # sets its name, so it can be found by name

But a preferred method is to create a UI object which will do all of the setup of your widget at once. The big advantage is that such an UI object can be created graphically with the Qt Designer program. A typical object generated by Qt Designer is like this:

class myWidget_Ui(object):
  def setupUi(self, myWidget):
    myWidget.setObjectName("my Nice New Widget")
    myWidget.resize(QtCore.QSize(300,100).expandedTo(myWidget.minimumSizeHint())) # sets size of the widget

    self.label = QtGui.QLabel(myWidget) # creates a label
    self.label.setGeometry(QtCore.QRect(50,50,200,24)) # sets its size
    self.label.setObjectName("label") # sets its name, so it can be found by name

  def retranslateUi(self, draftToolbar): # built-in QT function that manages translations of widgets
    myWidget.setWindowTitle(QtGui.QApplication.translate("myWidget", "My Widget", None, QtGui.QApplication.UnicodeUTF8))
    self.label.setText(QtGui.QApplication.translate("myWidget", "Welcome to my new widget!", None, QtGui.QApplication.UnicodeUTF8))

To use it, you just need to apply it to your freshly created widget like this:

app = QtGui.qApp
FCmw = app.activeWindow()
myNewFreeCADWidget = QtGui.QDockWidget() # create a new dckwidget
myNewFreeCADWidget.ui = myWidget_Ui() # load the Ui script
myNewFreeCADWidget.ui.setupUi(myNewFreeCADWidget) # setup the ui
FCmw.addDockWidget(QtCore.Qt.RightDockWidgetArea,myNewFreeCADWidget) # add the widget to the main window
Pivy
Scripted objects