Edytor właściwości

From FreeCAD Documentation
Revision as of 04:11, 21 September 2019 by Vocx (talk | contribs) (Created page with "490px|left {{TitleProperty|Base}}")
Interface Customization
Workbenches

Przegląd

Edytor właściwości jest jednym z najważniejszych narzędzi we FreeCAD-ie. Edytor właściwości pozwala na zarządzanie właściwościami obiektów w Twoim dokumencie.

Ogólnie edytor właściwości ma za zadanie zarządzać tylko jednego obiektu jednocześnie. Wartości pokazane w edytorze właściwości należą do aktywnego obiektu z aktywnego dokumentu (zwracaj uwagę który dokument jest aktywny, gdy pracujesz na kilku dokumentach jednocześnie). Jeśli nie zaznaczysz żadnego obiektu edytor właściwości będzie pusty.

Nie wszystkie właściwości mogą być modyfikowane w danym momencie. W zależności od określonego stanu niektóre właściwości będą wyświetlane jako tylko do odczytu.

Właściwości obiektu są pogrupowane właściwości widoku i właściwości danych, i dostępne pod oddzielnymi tabami.

Różne obiekty mogą mieć różne właściwości. Jednak niektóre właściwości są dostępne dla wszystkich obiektów, na przykład pozycja i dane o rotacji obiektu są właściwościami danych które mogą być modyfikowane.

Definicje właściwości

Właściwość(property) to kawałek informacji jak liczba lub tekst który jest dołączony do dokumentu FreeCAD lub obiektu w tym dokumencie. Właściwość może być wyświetlona, zmodyfikowana przy pomocy [Property editor/pl edytora właściwości].

Properties play a very important part in FreeCAD, since it has been designed to work with parametric objects, which are objects defined only by their properties.

Custom scripted objects in FreeCAD can have properties of the following types:

Boolean
Float
FloatList
FloatConstraint
Angle
Distance
Integer
IntegerConstraint
Percent
Enumeration
IntegerList
String
StringList
Link
LinkList
Matrix
Vector
VectorList
Placement
PlacementLink
Color
ColorList
Material
Path
File
FileIncluded
PartShape
FilletContour
Circle

Przykładowe właściwości obiektu "Part"

Właściwości

Są dwa typy właściwości, dostępne przez taby na dole edytora właściwości

WIDOKWidok : właściwości związane z "wizualnymi" parametrami obiektu.
DANEData : właściwości związane z "fizycznymi" parametrami obiektu.

View

Base

  • WIDOKBounding Box : Indicates if a box showing the overall extent of the object is to be displayed. Value False, or True (Default, False).
  • WIDOKControl Point : Indicates if the feature control points are to be displayed. Value False, or True (Default, False).
  • WIDOKDeviation : Sets the accuracy of the polygonal representation of the model in the 3d view (tessellation). Lower values = better quality. The value is in percent of object's size (deviation in mm = (w+h+d)/3*valueInPercent/100, where w,h,d are the bounding box dimensions).
  • WIDOKDisplay Mode :Display mode of the feature, Flat lines, Shaded, Wireframe, Points . (Default, Flat lines).
  • WIDOKLighting : Lighting One side, Two side . (Default, Two side).
  • WIDOKLine Color : Gives the color of the line (edges) (Default, 25, 25, 25).
  • WIDOKLine Width : Gives the thickness of the line (edges) (Default, 2).
  • WIDOKPoint Color : Gives the color of the points (ends of the feature) (Default, 25, 25, 25).
  • WIDOKPoint Size : Gives the size of the points (Default, 2).
  • WIDOKSelectable : Allows selection of the feature. Value False, ou True (Default, True).
  • WIDOKShape Color : Give the color shape (default, 204, 204, 204).
  • WIDOKTransparency : Sets the degree of transparency in the feature of 0 to 100 (Default, 0).
  • WIDOKVisibility : Determines the visibility of the feature (like the bar SPACE). Value False, or True (Default, True).


Data

Base


DANEPlacement : Summary of the data below. Every feature has a placement that can be controlled through the Data Properties table. It controls the placement of the part with respect to the coordinate system. NOTE: The placement properties do not affect the physical dimensions of the feature, but merely its position in space!
If you select the title Placement Options Placement, a button with three small points appears to the right. Clicking this button ..., opens the Tasks_Placement options window.


DANEAngle : Specifies the angle to be used with the axis property (below). An angle is set here, and the axis that the angle acts upon is set with the axis property. The feature is rotated by the specified angle, about the specified axis. A usage example might be if you created a revolution feature as required, but then needed to rotate the whole feature by some amount, in order to allow it to line-up with another pre-existing feature.


DANEAxis : This property specifies the axis/axes about which the feature is to be rotated. The exact value of rotation comes from the angle property (above). This property takes three arguments, which are passed as numbers in the x, y, and z boxes in the tool. Setting a value for more than one of the axes will cause the part to be rotated in each axis, by the angle value multiplied by the value for the axis. For example, with an angle of 15° set, specifying a value of 1.0 for x, and 2.0 for y will cause the finished part to be rotated 15° in the x-axis AND 30° in the y-axis.


DANEPosition : This property specifies the base point to which all dimensions refer. This takes three arguments, which are passed as numbers to the x, y, and z boxes in the tool. Setting a value for more than one of the boxes will cause the part to be translated by the number of units along the corresponding axis.


DANELabel : The Label is the name given to the object (feature), this name can be changed as desired.


PS: The displayed properties can vary, depending on the tool used.

Interface Customization/pl
Workbenches/pl