Preferences Editor/de: Difference between revisions

From FreeCAD Documentation
(Created page with "==Import-Export Einstellungen==")
No edit summary
 
(273 intermediate revisions by 9 users not shown)
Line 1: Line 1:
<languages/>
<languages/>

{{docnav/de
{{Docnav/de
|[[Document structure|Document structure]]
|[[Interface_Customization/de|Anpassung der Oberfläche]]
|[[Import Export Preference|Import Export Preference]]
|[[Import_Export_Preferences/de|Import Export Einstellungen]]
}}
}}


{{TOCright}}
Die Einstellungen für FreeCAD befinden sich im Verzeichnis {{MenuCommand|Bearbeiten → Einstellungen}}


<span id="Introduction"></span>
Die FreeCAD Funktionalität ist in verschiedene Module unterteilt, wobei jedes Modul für die Arbeit mit einer bestimmten [[Workbenches|Arbeitsbereichen]] verantwortlich ist. FreeCAD verwendet auch ein Konzept namens late loading, d.h. Komponenten werden nur dann geladen, wenn sie benötigt werden. Du hast vielleicht bemerkt, dass bei der Auswahl eines Arbeitsbereichs in der FreeCAD Werkzeugleiste dieser Arbeitsbereich und alle ihre Komponenten in diesem Moment geladen werden. Dazu gehören auch die Einstellungen.
==Einleitung==


Zum Start des '''Voreinstellungseditors''' wähl man den Menüeintrag {{MenuCommand|Bearbeiten → Einstellungen...}}. Im macOS erscheint die Menüoption {{MenuCommand|Einstellungen...}} im {{MenuCommand|FreeCAD}}-Menü anstatt im Bearbeitungsmenü (ersteres ist der vorgegebene Ort für Einstellungen auf dem Mac).
Ohne geladenes Modul hast Du Zugriff auf zwei Konfigurationsabschnitte, die für die allgemeinen Anwendungseinstellungen und die Anzeigeeinstellungen verantwortlich sind. Wenn Du dich in einem bestimmten Arbeitsbereich befindest, erscheinen die Einstellungen dieses Arbeitsbereichs als neuer Abschnitt und die von dem Arbeitsbereich unterstützten Dateiformate als neue Registerkarte im Abschnitt {{MenuCommand|Import-Export}}.


FreeCAD verwendet ein Arbeitsbereich-Konzept, bei dem jeder Arbeitsbereich für bestimmte Aufgaben und Funktionen zuständig ist. Ein Arbeitsbereich kann seine eigenen Voreinstellungen haben. Diese werden nur im Voreinstellungseditor angezeigt, normalerweise in einem fest zugeordneten Abschnitt, wenn der Arbeitsbereich in der aktuellen FreeCAD-Sitzung geladen ist. Einige Arbeitsbereiche beinhalten zusätzliche Unterstützung für besondere Import- und Exportformate. Wenn sie dazugehörige Voreinstellungen enthalten, werden diese auf einer oder mehreren zusätzlichen Registerkarten im Abschnitt [[#Import-Export|Import-Export]] des Voreinstellungseditors angezeigt.
Wenn du auf die Schaltfläche {{Button|Reset}} in der unteren linken Ecke einer beliebigen Einstellungsanzeige klickst, wird '''all''' der FreeCAD Einstellungen auf ihre Standardwerte gesetzt.


Um Resourcen zu schonen, lädt FreeCAD nicht automatisch alle vorhandenen Arbeitsbereich. Siehe [[#Arbeitsbereiche|Arbeitsbereiche]] für Weitere Informationen. Eine Liste mit Einstellungen im Zusammenhang mit Arbeitsbereichen ist unter [[#Einstellungen_der_Arbeitsbereiche|Einstellungen der Arbeitsbereiche]] zu finden.
==Allgemeine Einstellung==


Wenn kein Arbeitsbereich geladen ist, erscheinen sechs Abschnitte im Voreinstellungseditor: [[#Allgemein|Allgemein]], [[#Anzeige|Anzeige]], [[#Arbeitsbereiche|Arbeitsbereiche]], [[#Python|Python]], [[#Addon_Manager|Addon-Manager]] und [[#Import_/_Export|Import / Export]]. Weitere hinzugeladene Arbeitsbereiche mit eigenen Voreinstellungen erscheinen unter diesen.
Dieser Einstellungsbereich hat 6 Registerkarten: Allgemein, Dokument, Editor, Ausgabefenster, Makro und Einheiten.


Das Drücken der Schaltfläche {{Button|Zurücksetzen}} in der linken unteren Ecke des Voreinstellungsdialogs öffnet ein Menü ({{Version/de|0.22}}) mit Optionen zum Zurücksetzen der Einstellungen auf ihre Standardwerte. Es kann der aktuelle Menüreiter, die aktuelle Gruppe oder alle Einstellungen zurückgesetzt werden. In {{VersionMinus/de|0.21}} setzt die Schaltfläche '''alle''' Einstellungen zurück.
===Allgemeines===


Einige fortgeschrittene Einstellungen können nur im [[Std_DlgParameter/de|Parameter-Editor]] geändert werden. Die Seite [[Fine-tuning/de|Fine-tuning]] führt einige auf.
Auf der Registerkarte "Allgemein" können Sie Folgendes festlegen:

{| class="wikitable float-right mw-collapsible mw-collapsible mw-collapsed".
<span id="General"></span>
==Allgemein==

Dieser Abschnitt der Voreinstellungen hat standardmäßig sieben Registerkarten: Allgemein, Dokument, Auswahl, Cache, Benachrichtigungsbereich, Ausgabefenster und Hilfe.

In {{VersionMinus/de|0.21}} steht die siebente Registerkarte Hilfe nur dann zur Verfügung, wenn das [https://github.com/FreeCAD/FreeCAD-Help Hilfe-Addon] mit dem [[Std_AddonMgr/de|Addon-Manager]] installiert wurde.

<span id="General"></span>
===Allgemein===

Auf der Registerkarte "Allgemein" kann Folgendes festgelegt werden:

{| class="wikitable float-right mw-collapsible mw-collapsed"
!style="width: 33%;"|Name
!style="width: 33%;"|Name
!style="width: 66%;"|Beschreibung
!style="width: 66%;"|Description
|-
|-
| {{MenuCommand|Change language}}
| {{MenuCommand|Sprache}}
| Wähle die Sprache der Benutzeroberfläche von FreeCAD aus.
| Sprache der Benutzeroberfläche der Anwendung.
|-
|-
| {{MenuCommand|Größe der Liste der letzten Dateien}}}}}
| {{MenuCommand|Standardeinheitensystem}}
| Einheitensystem für alle Bereiche der Anwendung.{{Version/de|0.22}}: Wird als Standardwert für das [[Std_ProjectInfo/de|Dokumenten-Einheitensystem]] neuer Dokumente.
| Gib an, wie viele Dateien in der Liste der letzten Dateien aufgelistet werden sollen.
|-
|-
| {{MenuCommand|Aktivieren des gekachelten Hintergrunds}}}}
| {{MenuCommand|Anzahl der Nachkommastellen}}
| Anzahl der Nachkommastellen, die für Zahlen und Maße angezeigt werden sollen.
| Wenn diese Option aktiviert ist, besteht der Hintergrund des Hauptfensters von FreeCAD standardmäßig aus Kacheln dieses Bildes: [[File:Background.png|64px]]
|-
| {{MenuCommand|Projekteinheitensystem ignorieren und Standard verwenden}} {{Version/de|0.22}}
| Wenn aktiviert, werden Projekteinheitensysteme ignoriert und überschreiben nicht das Standardeinheitensystem.
|-
| {{MenuCommand|Kleinster Zollteiler}} {{Version/de|0.22}}
| Der kleinste Zollteiler, der für Zahlen und Maße angezeigt werden soll. Steht nur für Einheitensysteme zur Verfügung, die Zoll-Bruchwerte verwenden.
|-
| {{MenuCommand|Zahlenformat}} {{Version/de|0.20}}
| Legt das Zahlenformat fest. Optionen sind:
* '''Betriebssystem''': Das vom Betriebssystem festgelegte Dezimaltrennzeichen wird verwendet.
* '''Ausgewählte Sprache''': Das Dezimaltrennzeichen wird entsprechend der ausgewählten Sprache von FreeCADs Benutzerschnittstelle verwendet.
* '''C/POSIX''': Ein Punkt wird als Dezimaltrennzeichen verwendet.
|-
| {{MenuCommand|Dezimaltrennzeichen ersetzen}} {{Version/de|0.20}}
| Wenn aktiviert, wird das Dezimaltrennzeichen des Ziffernblocks durch das in der Einstellung {{MenuCommand|Zahlenformat}} festgelegte Trennzeichen ersetzt. {{Version/de|0.21}}: Man beachte, dass, wenn diese Einstellung aktiviert ist, in der [[Python_console/de|Python-Konsole]] und dem [[Std_DlgMacroExecute/de#Bearbeiten|Makro-Editor]] immer ein ein Punkt ausgegeben wird, wenn das Dezimaltrennzeichen des Ziffernblocks verwendet wird.
|-
| {{MenuCommand|Thema}}
| Legt ein [[Interface_Customization/de#Themen|Thema]] zum Anpassen des Aussehens der Benutzerschnittstelle fest.
|-
| {{MenuCommand|Bildgröße in Symbolleisten}}
| Legt die Größe der Symbole in den Symbolleisten fest. Die Optionen sind:
* '''Klein (16px)'''
* '''Mittel (24px)'''
* '''Groß (32px)'''
* '''Extra Groß (48px)'''
|-
| {{MenuCommand|Baumstruktur-Ansichtsmodus}}
| Legt fest, wie die Baumansicht in der Benutzerschnittstelle dargestellt wird (Neustart erforderlich). Die Optionen sind:
* '''Combo-Ansicht''': Kombiniert die Baumansicht und den Eingenschafteneditor in einem Fenster.
* '''Baumansicht und Eingenschafteneditor''': Teilt die Baumansicht und den Eingenschafteneditor in separate Fenster auf.
* '''Beide''': Zeigt alle drei Fenster. {{VersionMinus/de|0.21}}
|-
| {{MenuCommand|Anzahl der zuletzt benutzten Dateien}}
| Legt fest, wie viele Dateien in der Liste der zuletzt verwendeten Dateien gelistet werden sollen.


Optionally, imported files can be excluded from this list, and exported files can be included. See [[Fine-tuning|Fine-tuning]].
Diese Option hat nur dann einen Effekt, wenn in {{MenuCommand|Style Sheet}}/''No Style Sheet'' ausgewählt ist.
|-
| {{MenuCommand|Enable tiled background}}
| If checked, the background of FreeCAD's main window will by default consist of tiles of this image: [[File:Background.png|64px]]


Diese Option hat nur dann einen Effekt, falls keine {{MenuCommand|Formatvorlage}} ausgewählt ist.
Das Bild kann geändert werden, indem die Ordner {{FileName|Gui/Images}} im Ordner hinzufügt werden.


Das Bild kann geändert werden, indem die Ordner {{FileName|Gui/Images}} im Ordner hinzufügt werden:
[https://www.howtogeek.com/318177/what-is-the-appdata-folder-in-windows/ {{FileName|%APPDATA%]/FreeCAD}} (on Windows),


{{FileName/de|$HOME/.FreeCAD}} (auf Linux) oder
{{FileName|[https://www.howtogeek.com/318177/what-is-the-appdata-folder-in-windows/ %APPDATA%]/FreeCAD}} (in Windows),


{{FileName|$HOME/Library/Preferences/FreeCAD}} (auf MacOS).
{{FileName|$HOME/.FreeCAD}} (auf Linux) oder


{{FileName|$HOME/Library/Preferences/FreeCAD}} (auf macOS).
Lege dort eine Datei namens {{FileName|background.png}} an und deaktiviere diese Option, um die geänderte Datei anzuzeigen.

Eine Datei mit dem Namen {{FileName|background.png}} in den Ordner {{FileName|Images}} legen und diese Option deaktivieren/aktivieren, um die geänderte Datei anzuzeigen.
|-
|-
| {{MenuCommand|Style sheet}}
| {{MenuCommand|Startbildschirm beim Starten anzeigen}}
| Wenn diese Option aktiviert ist, wird der Startbildschirm beim Start von FreeCAD angezeigt.
| Auswahl einer Formatvorlage. Die Formatvorlagen definieren, wie die Benutzeroberfläche von FreeCAD aussieht.

Der Begrüßungsbildschirmbild kann geändert werden, indem eine Datei namens {{FileName|splash_image.png}} in den Ordner {{FileName|Images}}} gestellt wird, der unter {{MenuCommand|Gekachelten Hintergrund aktivieren}} bereits erwähnt wurde.
|-
|-
| {{MenuCommand|Size of toolbar icons}}
| {{MenuCommand|Blinken des Eingabezeigers aktivieren}}
| Wenn aktiviert, wird der Textingabezeiger in der [[Python_console|Python-Konsole]] und im [[Std_DlgMacroExecute/de#Bearbeiten|Makroeditor]] blinken.
| Auswahl der Größe für die Symbole der Werkzeugleiste
|-
|-
| {{MenuCommand|Auto load module after start up}}
| {{MenuCommand|Überlagerung aktivieren}} {{Version/de|0.22}}
| Wenn aktiviert, werden angedockte Fenster wie transparente Überlagerungen behandelt.
| Auswahl, welcher Arbeitsbereich direkt nach dem Start von FreeCAD verwendet wird.
|-
|-
| {{MenuCommand|Enable splash screen at start up}}
| {{MenuCommand|Präferenz-Pakete}} {{Version/de|0.20}}
| Listet die vorhandenen [[Preference_Packs/de|Voreinstellungspakete]] und ermöglicht auch sie zu importieren, sichern, verwalten und rückzusetzen.
| Wenn diese Option aktiviert ist, wird beim Start der Splash-Screen von FreeCAD angezeigt.

Das Splash-Screen-Bild kann geändert werden, indem die Ordner {{FileName|Gui/Images}}} im Ordner {{FileName|%APPDATA%/FreeCAD}}} hinzugefügt werden. (wobei %APPDATA% der benutzerspezifische Anwendungsordner von FreeCAD des Betriebssystems ist). Lege dort eine Datei namens {{FileName|splash_image.png}}} an und starte FreeCAD neu, um den geänderten Startbildschirm zu sehen.
|-
| {{MenuCommand|Enable word wrap}}
| Wörter werden umgebrochen, wenn sie den verfügbaren horizontalen Platz in der Python-Konsole überschreiten. Diese Konsole wird über das Menü {{MenuCommand|Ansicht → Paneele → Python Konsole}}} angezeigt.
|}
|}


[[Image:Preference_General_Tab_01.png]]
[[Image:Preferences_General_Tab_General.png]]


<span id="Document"></span>
===Dokument===
===Dokument===


Auf der Registerkarte "Dokument" kann Folgendes festgelegt werden:
In the ''Document'' tab you can specify the following:

{| class="wikitable float-right mw-collapsible mw-collapsed"
{| class="wikitable float-right mw-collapsible mw-collapsed"
!style="width: 33%;"|Name
!style="width: 33%;"|Name
Line 73: Line 126:
|-
|-
| {{MenuCommand|Create new document at start up}}
| {{MenuCommand|Create new document at start up}}
| If checked, FreeCAD will create a new document when started
| If checked, FreeCAD will create a new document when started.
|-
|-
| {{MenuCommand|Document save compression level}}
| {{MenuCommand|Document save compression level}}
| Specification of the compression level for {{FileName|FCStd}} files. {{FileName|FCStd}} files are ZIP-compressed files. Therefore you can rename their suffix {{FileName|.FCStd}} to {{FileName|.zip}} and open them with a ZIP archive program.
| Specifies the compression level for {{FileName|FCStd}} files. {{FileName|FCStd}} files are ZIP-compressed files. Therefore you can rename their suffix {{FileName|.FCStd}} to {{FileName|.zip}} and open them with a ZIP archive program.
|-
|-
| {{MenuCommand|Using Undo/Redo on documents}}
| {{MenuCommand|Using Undo/Redo on documents}}
| If checked, all changes in documents are stored so that they can be undone/redone
| If checked, all changes in documents are stored so that they can be undone/redone.
|-
|-
| {{MenuCommand|Maximum Undo/Redo steps}}
| {{MenuCommand|Maximum Undo/Redo steps}}
| Specification how many Undo/Redo steps should be recorded
| Specifies how many Undo/Redo steps should be recorded.
|-
| {{MenuCommand|Allow aborting recomputation}}
| If checked, recomputations can be aborted by pressing {{KEY|Esc}}. This may slightly increase the recomputation time.
|-
|-
| {{MenuCommand|Run AutoRecovery at startup}}
| {{MenuCommand|Run AutoRecovery at startup}}
| If there is a recovery file available FreeCAD will automatically run a file recovery when it is started. This way files can be restored if a crash occurred.
| If there is a recovery file available FreeCAD will automatically run a file recovery when it is started. This way files can be restored if a crash occurred.
|-
|-
| {{MenuCommand|Save AutoRecovery information every}}
| {{MenuCommand|Save AutoRecovery information every}}
| Specification how often a recovery file is written.
| Specifies how often a recovery file is written.
|-
|-
| {{MenuCommand|Save thumbnail into project file when saving document}}
| {{MenuCommand|Save thumbnail into project file when saving document}}
| If checked, also a thumbnail will be stored when the document is saved. The thumbnail will for example be shown in the list of recent files in the [[Start_Workbench|Start workbench]].
| If checked, a thumbnail will be stored when the document is saved. The thumbnail will for example be shown in the list of recent files in the [[Start_Workbench|Start Workbench]]. It is possible to select a {{MenuCommand|Size}} between 128×128 and 512×512 pixels for the thumbnail. Common sizes are powers of two: 128, 256, 512.
|-
|-
| {{MenuCommand|Add the program logo to the generated thumbnail}}
| {{MenuCommand|Add the program logo to the generated thumbnail}}
| If checked, the FreeCAD program logo [[image:FreeCAD-logo.svg|24px]] will be added to the thumbnail. This option only has an effect if {{MenuCommand|Save thumbnail into project file when saving document}} is used.
| If checked, the FreeCAD program logo [[image:Freecad.svg|24px]] will be added to the thumbnail.
|-
|-
| {{MenuCommand|Maximum number of backup files to keep when resaving document}}
| {{MenuCommand|Maximum number of backup files to keep when resaving document}}
| If checked, backup files will be kept when saving the document. You can specify how many backup files will be kept. They contain the previously saved document version. The first backup file will have the file suffix {{FileName|.FCStd1}}, the second {{FileName|.FCStd2}} and so on.
| If checked, backup files will be kept when saving the document. You can specify the number of backup files to keep. Backup files are previously saved versions of the document. The first backup file will have the file suffix {{FileName|.FCStd1}}, the second {{FileName|.FCStd2}} and so on.
|-
|-
| {{MenuCommand|Disable partial loading of external linked objects}}
| {{MenuCommand|Use date and FCBak extension}}
| If checked, backup files will get the extension {{FileName|.FCbak}} and their file names get a date suffix according to the specified {{MenuCommand|Date format}}. For a description of the date format see [https://devhints.io/datetime Date & time formats cheatsheet].
| Enable partial loading of external linked document. When enabled, only the referenced objects and their dependencies will be loaded when a linked document is auto opened together with the main document. A partially loaded document cannot be edited. Double click the document icon in the tree view to reload it in full. A more detailed explanation of the feature can be found on the [https://github.com/realthunder/FreeCAD_assembly3/wiki/Core-Changes#partial-document-loading Assembly3 documentation page]
With the default settings a backup file will for example get this name {{FileName|TD-Cube.20200315-215654.FCBak}} (original filename is {{FileName|TD-Cube.FCStd}}).
|-
|-
| {{MenuCommand|Allow duplicate object labels in one document}}
| {{MenuCommand|Allow duplicate object labels in one document}}
| If checked, objects can have the same label/name. For example different parts or features can then have the same name in the same document.
| If checked, objects can have the same label.
|-
| {{MenuCommand|Disable partial loading of external linked objects}}
| If partial loading of external linked objects is enabled, only the referenced objects and their dependencies will be loaded when the linked document is auto opened together with the main document. Such a partially loaded document cannot be edited. Double click the document icon in the tree view to reload it in full. A more detailed explanation of this feature can be found on the [https://github.com/realthunder/FreeCAD_assembly3/wiki/Core-Changes#partial-document-loading Assembly3 documentation page].
|-
|-
| {{MenuCommand|Author name}}
| {{MenuCommand|Author name}}
| All documents that will be created will get the specified author name. Keep the author field blank for an anonymous author. If the option {{MenuCommand|Set on save}} is checked, the field ''Last modified by'' will be set to the specified author when saving the file. This field can be viewed using the menu {{MenuCommand|File → Project information}}.
| All created documents will get the specified author name. Keep the author field blank if you do not want to include this information. If the option {{MenuCommand|Set on save}} is checked, the field '''Last modified by''' will be set to the specified author when saving the file. This field can be viewed using the {{MenuCommand|File → Project information}} menu option.
|-
|-
| {{MenuCommand|Company}}
| {{MenuCommand|Company}}
| All documents that will be created will get the specified company name
| All created documents will get the specified company name.
|-
|-
| {{MenuCommand|Default license}}
| {{MenuCommand|Default license}}
| Selection of a default license for new documents. For predefined license the {{MenuCommand|License URL}} will automatically be set accordingly. Select 'Other' for an own or special license.
| Specifies the license for new documents. For predefined licenses the {{MenuCommand|License URL}} will automatically be set accordingly. Select '''Other''' for a custom license.
|-
|-
| {{MenuCommand|License URL}}
| {{MenuCommand|License URL}}
| Specification of an URL describing the license selected in {{MenuCommand|Default license}}
| Specifies an URL describing the license selected in {{MenuCommand|Default license}}.
|}
|}


[[Image:Preference_General_Tab_02.png]]
[[Image:Preferences_General_Tab_Document.png]]


<span id="Selection"></span>
===Editor===
===Auswahl===


Auf der Registerkarte "Auswahl" kann Folgendes festgelegt werden:
Die Einstellungen der Editor Einstellungen beeinflussen das Verhalten des Makroeditors. Dieser Editor kann über das Menü {{MenuCommand/de|Makro → Makros..... → Bearbeiten/Erstellen}} geöffnet werden.


{| class="wikitable float-right mw-collapsible mw-collapsed"
Die Farb- und Schrifteinstellungen wirken sich auch auf die [[Python console/de|Python-Konsole]] aus. Diese Konsole wird über das Menü {{MenuCommand|View → Panels → Python console}} angezeigt.
!style="width: 33%;"|Name
!style="width: 66%;"|Description
|-
| {{MenuCommand|Auto switch to the 3D view containing the selected item}}
| Enables the [[Std_TreeSyncView|Tree view SyncView mode]].
|-
| {{MenuCommand|Auto expand tree item when the corresponding object is selected in 3D view}}
| Enables the [[Std_TreeSyncSelection|Tree view SyncSelection mode]].
|-
| {{MenuCommand|Preselect the object in 3D view when mouse over the tree item}}
| Enables the [[Std_TreePreSelection|Tree view PreSelection mode]].
|-
| {{MenuCommand|Record selection in tree view in order to go back/forward using navigation button}}
| Enables the [[Std_TreeRecordSelection|Tree view RecordSelection mode]].
|-
| {{MenuCommand|Add checkboxes for selection in document tree}}
| Each [[Tree_view|Tree view]] item will get a checkbox. This is for example useful for selecting multiple items on a touchscreen.
|}

[[Image:Preferences_General_Tab_Selection.png]]

===Cache===

Diese Eigenschaften beziehen sich auf den Cache-Ordner, in dem FreeCAD vorübergehend Dateien (temporary files) speichert

Auf der Registerkarte ''Cache'' ({{Version/de|0.20}}) kann Folgendes eingestellt werden:


In the ''Editor'' tab you can specify the following:
{| class="wikitable float-right mw-collapsible mw-collapsed"
{| class="wikitable float-right mw-collapsible mw-collapsed"
!style="width: 33%;"|Name
!style="width: 33%;"|Name
!style="width: 66%;"|Description
!style="width: 66%;"|Description
|-
|-
| {{MenuCommand|Display Items}}
| {{MenuCommand|Ort}}
| Nennt den Pfad zum Cache-Verzeichnis.
| Selection of the code type. The color and font settings will be applied to the selected type. The result can be seen in the '''Preview''' field.
|-
|-
| {{MenuCommand|Family}}
| {{MenuCommand|Prüfen sie regelmäßig zum Programmstart:}}
| Steuert, wie oft die Ordnergöße geprüft wird. Die Auswahlmöglichkeiten sind:
| Specification of the font family that should be used for the selected code type
* '''Immer'''
* '''Täglich'''
* '''Wöchentlich'''
* '''Monatlich'''
* '''Jährlich'''
* '''Nie'''
|-
|-
| {{MenuCommand|Size}}
| {{MenuCommand|Limit der Cache-Größe:}}
| Nennt die maximale Größe des Ordners. Es wird angezeigt, wenn eine Prüfung durchgeführt wurde und die Größe des Ordners diesen Wert übersteigt. Die Auswahlmöglichkeiten sind:
| Specification of the font size that should be used for the selected code type
* '''100 MB'''
* '''300 MB'''
* '''500 MB'''
* '''1 GB'''
* '''2 GB'''
* '''3 GB'''
|-
|-
| {{MenuCommand|Enable line numbers}}
| {{MenuCommand|Aktuelle Cache-Größe:}}
| Zeigt die aktuelle Ordnergröße, wenn möglich. {{Button|Jetzt prüfen ´...}} klicken umd den Wert zu aktualisieren.
| If checked, the code lines will be numbered
|}

[[Image:Preferences_General_Tab_Cache.png]]

<span id="Notification_Area"></span>
===Benachrichtigungsbereich===

These preferences control the Notification Area and its notifications.

Auf der Registerkarte ''Notification Area'' ({{Version/de|0.21}}) kann Folgendes eingestellt werden:

{| class="wikitable float-right mw-collapsible mw-collapsed"
!style="width: 33%;"|Name
!style="width: 66%;"|Description
|-
|-
| {{MenuCommand|Tab size}}
| {{MenuCommand|Enable Notification Area}}
| If checked, the Notification Area will appear in the status bar.
| Specification of the tabulator raster (how many spaces). If it is for example set to '6', pressing {{KEY|Tab}} will jump to character 7 or 13 or 19 etc., depending the current cursor position. This setting is only used if {{MenuCommand|Keep tabs}} is selected.
|-
|-
| {{MenuCommand|Indent size}}
| {{MenuCommand|Enable non-intrusive notifications}}
| If checked, non-intrusive notifications will appear next to the Notification Area in the status bar.
| Specification of how many spaces will be inserted when pressing {{KEY|Tab}}. This setting is only used if {{MenuCommand|Insert spaces}} is selected.
|-
|-
| {{MenuCommand|Keep tabs}}
| {{MenuCommand|Errors}}
| If checked, errors will appear in the Notification Area.
| If selected, pressing {{KEY|Tab}} will insert a tabulator with the raster defined by {{MenuCommand|Tab size}}
|-
|-
| {{MenuCommand|Insert spaces}}
| {{MenuCommand|Warnings}}
| If checked, warnings will appear in the Notification Area.
| If selected, pressing {{KEY|Tab}} will insert the amount of spaces defined by {{MenuCommand|Indent size}}
|-
| {{MenuCommand|Maximum Duration}}
| Maximum duration during which notifications are shown (unless mouse buttons are clicked).
|-
| {{MenuCommand|Minimum Duration}}
| Minimum duration (idem).
|-
| {{MenuCommand|Maximum Number of Notifications}}
| Maximum number of notifications shown simultaneously.
|-
| {{MenuCommand|Notification width}}
| Width of the Notification Area in pixels.
|-
| {{MenuCommand|Hide when other window is activated}}
| If checked, open notifications will disappear when another window is activated.
|-
| {{MenuCommand|Do not show when inactive}}
| If checked, notifications will not appear if the FreeCAD window is not the active window.
|-
| {{MenuCommand|Maximum Messages (0 &#61; no limit)}}
| The maximum number of messages kept in the list. Set to 0 for no limit.
|-
| {{MenuCommand|Auto-remove User Notifications}}
| If checked, notifications will be removed from the message list when the '''Maximum Duration''' has elapsed.
|}
|}


[[Image:Preference_General_Tab_03.png]]
[[Image:Preferences_General_Tab_Notification_Area.png]]


<span id="Report_view"></span>
===Ausgabefenster===
===Ausgabefenster===


Die Ausgabeeinstellungen beeinflussen das Verhalten der [[Report view/de|Berichtansicht]].
Diese Einstellungen steuern das Verhalten der [[Report view/de|Ausgabefenster]]. Dieses Fenster wird über den Menüeintrag {{MenuCommand|Ansicht → Paneele → Ausgabefenster}} geöffnet.

Auf der Registerkarte ''Ausgabefenster'' kann Folgendes eingestellt werden:


In the ''Output'' tab you can specify the following:
{| class="wikitable float-right mw-collapsible mw-collapsed"
{| class="wikitable float-right mw-collapsible mw-collapsed"
!style="width: 33%;"|Name
!style="width: 33%;"|Name
!style="width: 66%;"|Description
!style="width: 66%;"|Description
|-
| {{MenuCommand|Record normal messages}}
| If checked, normal messages will be recorded. They will be displayed in the [[Report_view|Report view]] with the color set in {{MenuCommand|Normal messages}}.
|-
|-
| {{MenuCommand|Record log messages}}
| {{MenuCommand|Record log messages}}
| If checked, also log messages will be recorded. They will be output in the Report view panel with the color set in {{MenuCommand|Log messages}}. This panel is shown using the menu {{MenuCommand|View → Panels → Report view}}.
| If checked, log messages will be recorded. They will be displayed in the [[Report_view|Report view]] with the color set in {{MenuCommand|Log messages}}.
|-
|-
| {{MenuCommand|Record warnings}}
| {{MenuCommand|Record warnings}}
| If checked, warnings will be recorded. They will be output in the Report view panel with the color set in {{MenuCommand|Warnings}}.
| If checked, warnings will be recorded. They will be displayed in the [[Report_view|Report view]] with the color set in {{MenuCommand|Warnings}}.
|-
|-
| {{MenuCommand|Record error messages}}
| {{MenuCommand|Record error messages}}
| If checked, error messages will be recorded. They will be output in the Report view panel with the color set in {{MenuCommand|Errors}}
| If checked, error messages will be recorded. They will be displayed in the [[Report_view|Report view]] with the color set in {{MenuCommand|Errors}}.
|-
|-
| {{MenuCommand|Show report view on error or warning}}
| {{MenuCommand|Show report view on error}}
| If checked, report view panel will show up automatically as soon as an error or warning is logged.
| If checked, the [[Report_view|Report view]] will be shown automatically when an error is recorded.
|-
| {{MenuCommand|Show report view on warning}}
| If checked, the [[Report_view|Report view]] will be shown automatically when a warning is recorded.
|-
| {{MenuCommand|Show report view on normal message}}
| If checked, the [[Report_view|Report view]] will be shown automatically when a normal message is recorded.
|-
| {{MenuCommand|Show report view on log message}}
| If checked, the [[Report_view|Report view]] will be shown automatically when a log message is recorded.
|-
| {{MenuCommand|Include a timecode for each entry}}
| If checked, each message and warning will receive a timecode.
|-
|-
| {{MenuCommand|Normal messages}}
| {{MenuCommand|Normal messages}}
| Specification of the font color for normal messages in the Report view panel.
| Specifies the font color for normal messages.
|-
|-
| {{MenuCommand|Log messages}}
| {{MenuCommand|Log messages}}
| Specification of the font color for log messages in the Report view panel.
| Specifies the font color for log messages.
|-
|-
| {{MenuCommand|Warnings}}
| {{MenuCommand|Warnings}}
| Specification of the font color for warning messages in the Report view panel.
| Specifies the font color for warning messages.
|-
|-
| {{MenuCommand|Errors}}
| {{MenuCommand|Errors}}
| Specification of the font color for error messages in the Report view panel.
| Specifies the font color for error messages.

|-
|-
| {{MenuCommand|Redirect internal Python output to report view}}
| {{MenuCommand|Redirect internal Python output to report view}}
| If checked, internal Python output will be redirected from the Python console to the Report view panel. The Python console is shown using the menu {{MenuCommand|View → Panels → Python console}}
| If checked, internal Python output will be redirected from the [[Python_console|Python console]] to the [[Report_view|Report view]].
|-
|-
| {{MenuCommand|Redirect internal Python errors to report view}}
| {{MenuCommand|Redirect internal Python errors to report view}}
| If checked, internal Python error messages will be redirected from the Python console to the Report view panel.
| If checked, internal Python error messages will be redirected from the [[Python_console|Python console]] to the [[Report_view|Report view]].
|}
|}


[[Image:Preference_General_Tab_04.png]]
[[Image:Preferences_General_Tab_Report_view.png]]


===Makro===
===Help===


Auf der Registerkarte ''Help'' kann Folgendes eingestellt werden:
Diese Optionen steuern bestimmte Aspekte der Ausführung von [[macros|Makros]].


Auf der Registerkarte "Makro" kannst Du folgendes festlegen:
{| class="wikitable float-right mw-collapsible mw-collapsed"
{| class="wikitable float-right mw-collapsible mw-collapsed"
!style="width: 33%;"|Name
!style="width: 33%;"|Name
!style="width: 66%;"|Description
!style="width: 66%;"|Description
|-
|-
| {{MenuCommand|Run macros in local environment}}
| {{MenuCommand|Help location}}
| Specifies the location of the Help files. The options are:
| If checked, variables defined by macros are created as local variables, otherwise as global Python variable
* {{MenuCommand|Online}}: Enter the URL or leave blank to use the automatic [https://github.com/FreeCAD/FreeCAD-documentation/tree/main/wiki GitHub URL].
: {{MenuCommand|Translation suffix}}: If {{Value|https://wiki.freecad.org/}} is used, a [https://en.wikipedia.org/wiki/List_of_ISO_639-1_codes language suffix] can be specified. Use for example {{Value|fr}} for the French translation. Must be blank for the GitHub URL.
* {{MenuCommand|From disk location}}: Enter the path where the downloaded FreeCAD documentation can be found. To download the documentation select the ''offline-documentation'' addon from the Workbenches list in the [[Std_AddonMgr|Addon Manager]].
|-
|-
| {{MenuCommand|Macro path}}
| {{MenuCommand|Display}}
| Specifies where the documentation should be displayed. The options are:
| Specification of a path to macro files
* {{MenuCommand|In a new FreeCAD tab}}: The documentation is displayed on a new tab in the [[Main_view_area|Main view area]].
* {{MenuCommand|In your default web browser}}: The documentation is displayed in the default web browser.
* {{MenuCommand|In a separate, embeddable, dialog}}: The documentation is displayed in a separate dialog. This dialog can be docked on top of the [[Combo_view|Combo view]] for example.
|-
|-
| {{MenuCommand|Recording GUI commands}}
| {{MenuCommand|Custom stylesheet}}
| Specifies an optional custom stylesheet. Not used for the Wiki URL.
| If checked, [[Std_DlgMacroRecord|recorded macros]] will also contain user interface commands
|-
| {{MenuCommand|Record as comment}}
| If checked, [[Std_DlgMacroRecord|recorded macros]] will also contain user interface commands but as comments. This is useful if you don't want to execute visible actions when running the macro but to see what could be done visibly.
|-
| {{MenuCommand|Show script commands in python console}}
| If checked, the commands executed by the macro scripts are shown in the Python console. This console is shown using the menu {{MenuCommand|View → Panels → Python console}}.
|}
|}


[[Image:Preference_General_Tab_05.png]]
[[Image:Preferences_General_Tab_Help.png]]


<span id="Display"></span>
===Einheiten===
==Anzeige==


Dieser Einstellungsabschnitt enthält drei allgemeine Registerkarten, 3D-Ansicht, Navigation und Farben. Eine vierte, Netze, wird hinzugefügt, wenn der [[Mesh_Workbench/de|Netze-Arbeitsbereich]] geladen wurde.
In dieser Registerkarte wird konfiguriert, wie [[Units/de|Einheiten]] angezeigt werden.

<span id="3D_View"></span>
===3D-Viewer===

Auf der Registerkarte ''3D-Viewer'' kann Folgendes eingestellt werden:


Auf der Registerkarte "Einheiten" kannst Du folgendes festlegen:
{| class="wikitable float-right mw-collapsible mw-collapsed"
{| class="wikitable float-right mw-collapsible mw-collapsed"
!style="width: 33%;"|Name
!style="width: 33%;"|Name
!style="width: 66%;"|Description
!style="width: 66%;"|Beschreibung
|-
|-
| {{MenuCommand|User system}}
| {{MenuCommand|Show coordinate system in the corner / Koordinatensystem in Ecke anzeigen}}
| Wenn aktiviert, wird das Haupkoordinatensystem in der rechten unteren Ecke der [[3D_view/de|3D-Ansicht]] angezeigt.
| Selection of a unit system that should be used for all parts of FreeCAD
Die Eigenschaft {{MenuCommand|Relative Größe}} ({{Version/de|0.20}}) legt die Größe der Darstellung als prozentuale Größe der Ansicht fest (das Minimum ihrer Höhe und Breite).
|-
|-
| {{MenuCommand|Number of decimals}}
| {{MenuCommand|Show axis cross by default / Achsenkreuz standardmäßig anzeigen}}
| Wenn aktiviert, wird das Achsenkreuz standardmäßig in der [[3D_view/de|3D-Ansicht]] angezeigt.
| The number of decimals that should be shown for numbers and dimensions in FreeCAD
|-
|-
| {{MenuCommand|Minimum fractional inch}}
| {{MenuCommand|Show counter of frames per second / Anzeigen der Datenrate pro Sekunde}}
| Wenn aktiviert, wird die für die letzte Aktion benötigte Zeit und die sich ergebende [https://de.wikipedia.org/wiki/Bildfrequenz Bildrate] in der unteren linken Ecke der [[3D_view/de|3D-Ansicht]] angezeigt.
| Minimum fractional inch that should be displayed. This setting is only available if the unit system '''Building US (ft-in/sqft/cuft)''' is used.
|-
| {{MenuCommand|Use software OpenGL / Software-OpenGL verwenden}}
| Wenn aktiviert, verwendet [https://en.wikipedia.org/wiki/OpenGL OpenGL] die CPU anstatt der GPU. Diese Möglichkeit hilft bei der Fehlerbehebung bei Graphikkarten- und Treiberproblemen. Die Änderung dieser Möglichkeit erfordert einen Neustart der Anwendung.
|-
| {{MenuCommand|Use OpenGL VBO (Vertex Buffer Object) / OpenGL VBO (Vertex Buffer Object) verwenden}}
| Wenn aktiviert, werden [https://en.wikipedia.org/wiki/Vertex_Buffer_Object Vertex-Buffer-Objects] (VBO) verwendet. Ein VBO ist ein [https://en.wikipedia.org/wiki/OpenGL OpenGL]-Bestandteil, der Methoden zum Hochladen von Vertex-Daten (Position, Normalenvektor, Farbe usw.) zur Grafikkarte bereitstellt. VBOs bieten ordentliche Performance-Gewinne, da sich die Daten eher im Grafikspeicher befinden als im Hauptspeicher und so der GPU direkt zur verarbeitung bereit stehen. Für mehr Hintergrundinformation siehe [https://www.haroldserrano.com/blog/understanding-opengl-objects Understanding OpenGL Objects].
|-
| {{MenuCommand|Render Cache / Render Cache-Speicher}}
| "Render Cache" oder "Render Acceleration" wird etwas umfangreicher unter [https://github.com/realthunder/FreeCAD_assembly3/wiki/Link#render-caching FreeCAD assembly3 render-caching] erläutert. Es gibt drei Wahlmöglichkeiten:
* '''Automatisch''': Man lässt Coin3D entscheiden, wo zwischengespeichert wird (voreingestellt).
* '''Verteilt''': Manuelles Einschalten des Zwischenspeichers für alle view provider root nodes.
* '''Zentralisiert''': Manuelles Ausschalten des Zwischenspeicher für alle view provider root nodes and only cache at the scene graph root node. Dies bietet die höchste Render-Geschwindigkeit, hat aber eine langsamere Reaktion auf alle Szenenänderungen.
|-
| {{MenuCommand|Anti-Aliasing / Kantenglättung}}
| Gibt an, ob und welche Art von [https://en.wikipedia.org/wiki/Multisample_anti-aliasing multisample Anti-Aliasing] verwendet wird.
|-
| {{MenuCommand|Transparent objects / Transparente Objekte}}
| Legt die Art des Renderns transparenter Objekte fest. Die möglichkeiten sind:
* '''Einzelner Render-Durchgang''': Das Rendern wird in einem Durchgang ausgeführt (voreingestellt). Dies kann bei der Tiangulation zu Artefakten führen. Wenn diese auftreten, können sie durch die '''Zusätzlicher Rückseiten-Render-Durchgang''' vermieden werden.
* '''Zusätzlicher Rückseiten-Render-Durchgang''': Das Rendern wird in zwei Durchgängen ausgeführt. Rückwärts gerichtete Polygone werden im ersten Durchgang gerendert und vorwärts gerichtete Polygone im zweiten Durchgang.
|-
| {{MenuCommand|Marker size / Markergröße}}
| Legt die Größe von [[Glossary/de#Vertex|Vertizes]] (Knotenpunkte) in der Arbeitsumgebung [[Sketcher_Workbench/de|Sketcher]] fest. Der anklickbare Bereich der Punkte kann zusätzlich durch Vergrößerung des {{MenuCommand|Auswahlradius}} erweitert werden .
|-
| {{MenuCommand|Pick radius (px) / Auswahlradius (px)}}
| Stellt die Fläche zur Auswahl von Elementen in der [[3D_view/de|3D-Ansicht]] ein. Ein größerer Wert vereinfacht es objekte zu packen, kann aber dazu führen, dass einige kleine Objekte nicht mehr ausgewählt werden können.
|-
| {{MenuCommand|Eye to eye distance for stereo modes / Augenabstand für Stereo-Modi}}
| Legt den Augenabstand für stereoskopische Projektionen fest. Der angegebene Wert ist ein Faktor, der mit der Größe der [[Property_editor/de#Ansicht|Bounding Box]] des aktuell dargestellten 3D-Objekts multipliziert wird.
|-
| {{MenuCommand|Backlight color / Farbe der Hintergrundbeleuchtung}}
| Wenn aktiviert, wird die Hintergrundbeleuchtung mit der eingestellten Farbe eingeschaltet. Die Hintergrundbeleuchtung wird beim Rendern von Flächenrückseiten eingesetzt. Normaler Weise ist sie auf Solids nicht sichtbar, außer sie werden mit einer Schnittebene (auf-)geschnitten oder wenn Flächen nicht korrekt ausgerichtet sind. Es wird nur für Objekte verwendet, deren Eigenschaft Lighting (auf der Registerkarte Ansicht) auf '''One side''' gesetzt ist. Wenn deaktiviert, werden die Rückseiten der Flächen dieser Objektflächen schwarz dargestellt.
Die zugehörige Einstellung {{MenuCommand|Intensity}} legt die Intensität der Hintergrundbeleuchtung fest.
|-
| {{MenuCommand|Camera type / Kameratyp}}
| Legt die Projektionsart der Kamera fest. Die Wahlmöglichkeiten sind:
* '''Perspektivische Darstellung''': Objekte werden [https://de.wikipedia.org/wiki/Perspektive perspektivisch] dargestellt.
:(engl. [https://en.wikipedia.org/wiki/Perspective_projection perspective projection]).
* '''Orthographische Darstellung''': Objekte werden in [https://de.wikipedia.org/wiki/Orthogonalprojektion Orthogonalprojektion] dargestellt.
:(engl. [https://en.wikipedia.org/wiki/Orthographic_projection orthographic projection])
|}
|}


[[Image:Preference_General_Tab_06.png]]
[[Image:Preferences_Display_Tab_3D_View.png]]


===Navigation===
==Anzeige Einstellungen==


Auf der Registerkarte ''Navigation'' kann Folgendes eingestellt werden:
Dieser Einstellungsabschnitt enthält zwei allgemeine Registerkarten, 3D Ansicht und Farben, sowie weitere Registerkarten, die von den verwendeten Arbeitsbereichen abhängen.


===3D Ansicht===

Diese Registerkarte ist immer verfügbar und steuert bestimmte Eigenschaften der [[3D view/de|3D Ansicht]].

In the ''3D View'' tab you can specify the following:
{| class="wikitable float-right mw-collapsible mw-collapsed"
{| class="wikitable float-right mw-collapsible mw-collapsed"
!style="width: 33%;"|Name
!style="width: 33%;"|Name
!style="width: 66%;"|Description
!style="width: 66%;"|Description
|-
|-
| {{MenuCommand|Show coordinate system in the corner}}
| {{MenuCommand|Navigation cube}}
| If checked, the main coordinate system will always be shown at the lower right in opened files
| If checked, the [[Navigation_Cube|Navigation cube]] will be shown in the [[3D_view|3D view]].

|-
{{MenuCommand|Steps by turn}} defines the number of steps required for a full rotation when using the Navigation cube rotation arrows.
| {{MenuCommand|Show counter of frames per second}}

| If checked, the time needed for the last operation and the resulting [https://en.wikipedia.org/wiki/Frame_rate frame rate] will always be shown at the lower left in opened files
If {{MenuCommand|Rotate to nearest}} is checked, the 3D view is rotated to the nearest most logical position, based on the current orientation of the cube, when a cube face is clicked. Else clicking a face will always result in the same rotation. {{Version|0.20}}
|-

| {{MenuCommand|Show navigation cube}}
{{MenuCommand|Cube size}} defines the size of the cube. {{Version|0.20}}
| If checked, the [[Navigation_Cube|navigation cube]] will always be shown at the selected {{MenuCommand|Corner}} in opened files

|-
| {{MenuCommand|Use OpenGL Vertex Buffer Object}}
{{MenuCommand|Color}} sets the base color for all elements. {{Version|0.21}}

| If checked, [https://en.wikipedia.org/wiki/Vertex_Buffer_Object Vertex Buffer Objects] (VBO) will be used. A VBO is an [https://en.wikipedia.org/wiki/OpenGL OpenGL] feature that provides methods for uploading vertex data (position, normal vector, color, etc.) to the graphics card. VBOs offer substantial performance gains because the data resides in the graphics memory rather than the system memory and so it can be rendered directly by GPU. For more background info see [https://www.haroldserrano.com/blog/understanding-opengl-objects this webpage].
{{MenuCommand|Corner}} defines where the Navigation cube is displayed in the [[3D_view|3D view]]. The options are:
|-
* '''Top left'''
| {{MenuCommand|Render Cache}} {{Version|0.19}}
* '''Top right'''
| "Render Cache" or "Render Acceleration" is explained in more detail in [https://github.com/realthunder/FreeCAD_assembly3/wiki/Link#render-caching Link#render-caching]. There are 3 options:
* '''Bottom left'''
* '''Auto''' (default), let Coin3D decide where to cache.
* '''Bottom right'''
* '''Distributed''', manually turn on cache for all view provider root nodes.

* '''Centralized''', manually turn off cache in all nodes of all view providers, and only cache at the scene graph root node. This offers the fastest rendering speed, but slower response to any scene changes.
{{MenuCommand|Font name}} specifies the font used for the cube's texts. {{Version|0.21}}
|-

| {{MenuCommand|Enable animation}}
{{MenuCommand|Font size}} sets the size of the font used for the cube's texts. {{Version|0.21}}
| If checked, rotations can be animated. If for example the {{MenuCommand|3D Navigation}} set ''CAD'' is used and the mouse is moved while the scroll wheel and the right mouse button is pressed, parts are rotated. If one keeps the mouse moving while releasing e.g. the right mouse button, the rotation will continue as animation. To end the animation left-click with the mouse.

|-
|-
| {{MenuCommand|3D Navigation}}
| {{MenuCommand|3D Navigation}}
| Selection of a navigation settings set. To see what each set defines, select a set and press the button {{Button|Mouse...}}.
| Specifies a [[Mouse_navigation|mouse navigation style]]. To see the details of each style, select it and then press the {{Button|Mouse...}} button.
|-
|-
| {{MenuCommand|Orbit style}}
| {{MenuCommand|Orbit style}}
| Specifies the rotation orbit style used when in rotation mode. The options are:
| Selection of the rotation orbit style. When viewing a part in the x-y plane an being in the rotation mode of the 3D navigation, the difference is: If '''Trackball''' is selected, moving the mouse horizontally will rotate the part around the y-axis, if '''Turntable''' is selected the part will be rotated around the z-axis.
* '''Turntable''': Moving the mouse will divide the rotation in steps, rotations around the different axes are performed sequentially.
* '''Trackball''': Rotations around the different axes are performed simultaneously.
* '''Free Turntable''': Like '''Trackball''', but if possible the rotation axis is kept collinear with the global 3D view axis. {{Version|0.21}}
|-
|-
| {{MenuCommand|Anti-Aliasing}}
| {{MenuCommand|Rotation mode}}
| Defines the rotation center. The options are:
| Selection if and what kind of [https://en.wikipedia.org/wiki/Multisample_anti-aliasing multisample anti-aliasing] is used
* '''Window center'''
* '''Drag at cursor'''
* '''Object center'''
|-
|-
| {{MenuCommand|New Document Camera Orientation}}
| {{MenuCommand|Default camera orientation}}
| Selection of the camera orientation for new documents
| Specifies the camera orientation for new documents. This setting is also used by the [[Std_ViewHome|Std ViewHome]] command.
|-
|-
| {{MenuCommand|New Document Scale}}
| {{MenuCommand|Camera zoom}}
| Affects the initial "zoom level" of camera for new documents. The value you set is the diameter of a sphere that fits in 3D view. Default is 100 mm, convenient for objects like boxes for Arduino. It also sets initial size of origin features (base planes in a new PartDesign Body).
| Affects the initial camera zoom level for new documents. The value you set is the diameter of a sphere that fits in [[3D_view|3D view]]. The default is 100 mm. It also sets the initial size of origin features (base planes in new [[PartDesign_Body|PartDesign Bodies]] and [[Std_Part|Std Parts]]).
|-
| {{MenuCommand|Enable animation}}
| If checked, and {{MenuCommand|3D Navigation}} is set to '''CAD''', rotations can be animated. If the mouse is moved while the scroll wheel and the right mouse button are pressed, the view is rotated. If one keeps the mouse moving while releasing the right mouse button, the rotation will continue. To end this animation left-click with the mouse.
|-
|-
| {{MenuCommand|Zoom at cursor}}
| {{MenuCommand|Zoom at cursor}}
| If checked, zoom operations will be performed at the position of the mouse pointer. Otherwise zoom operations will be performed at the center of the current view. The {{MenuCommand|Zoom step}} defines how much will be zoomed. A zoom step of '1' means a factor of 7.5 for every zoom step.
| If checked, zoom operations will be performed at the position of the mouse pointer. Otherwise zoom operations will be performed at the center of the current view. The {{MenuCommand|Zoom step}} defines how much will be zoomed. A zoom step of '''1''' means a factor of 7.5 for every zoom step.
|-
|-
| {{MenuCommand|Invert zoom}}
| {{MenuCommand|Invert zoom}}
| If checked, the direction of zoom operations will be inverted.
| If checked, the direction of zoom operations will be inverted.
|-
|-
| {{MenuCommand|Disable touchscreen tilt gesture}}
| {{MenuCommand|Disable touchscreen tilt gesture}}
| If checked, the tilting gesture will be disabled for pinch-zooming (two-finger zooming). This only affects the {{MenuCommand|3D Navigation}} set ''Gesture''.
| If checked, and {{MenuCommand|3D Navigation}} is set to '''Gesture''', the tilting gesture will be disabled for pinch-zooming (two-finger zooming).
|-
|-
| {{MenuCommand|Drag at cursor}}
| {{MenuCommand|Enable rotation center indication}}
| If checked, rotations in 3D will use the current cursor position as center for the rotation. Otherwise always the center of the screen will be used.
| If checked, the rotation center of the view is shown when dragging. {{Version|0.22}}
|-
| {{MenuCommand|Marker size}}
| Selection of the size of [[Glossary#Vertex|vertices]] (points) in the [[Sketcher_Workbench|Sketcher workbench]]. The clickable area of points can be additionally enlarged by increasing {{MenuCommand|Pick radius}} (on Colors tab).
|-
| {{MenuCommand|Eye to eye distance for stereo modes}}
| Specification of the eye-to-eye distance used for stereo projections. The specified value is a factor that will be multiplied with the [[Property_editor#View|bounding box]] size of the 3D object that is currently displayed.
|-
| {{MenuCommand|Enable backlight color}}
| If checked, backlight is enabled with the defined color. Backlight is used for rendering back sides of faces (usually, you don't see them in solids, unless you slice one with a clipping plane, or if the faces aren't oriented correctly). It is only active for objects whose Lighting property (on View tab) is set to "One side". If disabled, back sides of faces of objects in "One side" lighting mode will be black.
|-
| {{MenuCommand|Intensity of backlight}}
| Specification of the intensity of the backlight. This setting is only enabled if {{MenuCommand|Enable backlight color}} is checked.
|-
| {{MenuCommand|Camera type}}
| Selection of the camera projection type.

* '''Perspective rendering''', objects will appear in a [https://en.wikipedia.org/wiki/Perspective_projection perspective projection].
* '''Orthographic rendering''', objects will be projected in [https://en.wikipedia.org/wiki/Orthographic_projection orthographic projection].
|}
|}


[[Image:Preferences_Display_Tab_Navigation.png]]
<div class="mw-translate-fuzzy">
[[Image:Preference_Display_Tab_01.png|left]]
</div>


<span id="Colors"></span>
===Farben===
===Farben===


Auf der Registerkarte ''Farben'' kann Folgendes eingestellt werden:
This tab is always available.


In the ''Colors'' tab you can specify the following:
{| class="wikitable float-right mw-collapsible mw-collapsed"
{| class="wikitable float-right mw-collapsible mw-collapsed"
!style="width: 33%;"|Name
!style="width: 33%;"|Name
Line 342: Line 526:
|-
|-
| {{MenuCommand|Enable preselection highlighting}}
| {{MenuCommand|Enable preselection highlighting}}
| If checked, preselection is turned on and will be highlighted by the specified color. Preselection means that for example edges in parts will be highlighted while hovering with the mouse over them to indicate that they can be selected.
| If checked, preselection is turned on and the specified color will be used for it. Preselection means that for example edges of objects will be highlighted while hovering over them with the mouse to indicate they can be selected.
|-
|-
| {{MenuCommand|Enable selection highlighting}}
| {{MenuCommand|Enable selection highlighting}}
| If checked, selection highlighting is turned on and the specified color will be used for it
| If checked, selection highlighting is turned on and the specified color will be used for it.
|-
| {{MenuCommand|Pick radius}}
| Sets the area for picking elements in 3D view. Larger value makes it easier to pick things, but can make some small features impossible to select.
|-
|-
| {{MenuCommand|Simple color}}
| {{MenuCommand|Simple color}}
| If selected, the background for parts will have the selected color
| If selected, the background of the [[3D_view|3D view]] will have the specified color.
|-
|-
| {{MenuCommand|Color gradient}}
| {{MenuCommand|Linear gradient}}
| If selected, the background of the [[3D_view|3D view]] will have a vertical color gradient defined by the specified '''Top''' and '''Bottom''' colors. if enabled, a '''Middle''' color can also be specified. Press the {{Button|[[Image:Button_sort.svg|16px]]}} button ({{Version|0.21}}) to switch the top and bottom colors.
| If selected, the background for parts will have the selected color gradient
|-
|-
| {{MenuCommand|Middle color}}
| {{MenuCommand|Radial gradient}} {{Version|0.21}}
| If selected, the background of the [[3D_view|3D view]] will have a radial color gradient defined by the specified '''Central''' and '''End''' colors. if enabled, a '''Midway''' color can also be specified. Press the {{Button|[[Image:Button_sort.svg|16px]]}} button to switch the central and end colors.
| Is only enabled if {{MenuCommand|Color gradient}} is selected. If checked, the color gradient will get the selected color as middle color.
|-
|-
| {{MenuCommand|Object being edited}}
| {{MenuCommand|Object being edited}}
| Selection of the background color for objects in the tree view that are currently edited
| Specifies the background color for objects in the tree view that are currently edited.
|-
|-
| {{MenuCommand|Active container}}
| {{MenuCommand|Active container}}
| Selection of the background color for active containers in the tree view. For example if there are several parts in the tree view and one part is toggled as [[PartDesign_Body#Active_Status|active body]], it will get the selected background color in the tree view.
| Specifies the background color for active containers in the tree view. For example an [[PartDesign_Body#Active_Status|active PartDesign Body]] will get this color.
|}
|}


[[Image:Preferences_Display_Tab_Colors.png]]
<div class="mw-translate-fuzzy">
[[Image:Preference_Display_Tab_02.png|left]]
</div>


<span id="Mesh_view"></span>
===Teilefarben===
===Netz===


Diese Registerkarte wird nur angezeigt, wenn der Arbeitsbereich [[Mesh_Workbench/de|Mesh]] geladen wurde.
This tab is only shown if you are in the [[Part_Module|Part]] or [[PartDesign_Workbench|PartDesign Workbench]] or if you have been in these workbenches before.

Auf der Registerkarte ''Netz'' kann Folgendes eingestellt werden:


In the ''Part colors'' tab you can specify the following:
{| class="wikitable float-right mw-collapsible mw-collapsed"
{| class="wikitable float-right mw-collapsible mw-collapsed"
!style="width: 33%;"|Name
!style="width: 33%;"|Name
!style="width: 66%;"|Description
!style="width: 66%;"|Description
|-
|-
| {{MenuCommand|Default shape color}}
| {{MenuCommand|Default mesh color}}
| Specifies the default face color.
| Selection of the default color for new shapes. If the option {{MenuCommand|Random shape color}} is set, a random color is used instead.
|-
|-
| {{MenuCommand|Default line color}}
| {{MenuCommand|Default line color}}
| Selection of the default line color for new shapes
| Specifies the default line color.
|-
|-
| {{MenuCommand|Default line width}}
| {{MenuCommand|Mesh transparency}}
| Specification of the default line thickness for new shapes
| Specifies the default mesh transparency.
|-
|-
| {{MenuCommand|Default vertex color}}
| {{MenuCommand|Line transparency}}
| Specifies the default line transparency.
| Selection of the default color for new [[Glossary#Vertex|vertices]]
|-
|-
| {{MenuCommand|Default vertex size}}
| {{MenuCommand|Two-side rendering}}
| If checked, the default value for the {{PropertyView|Lighting}} property is {{value|Two side}} instead of {{value|One side}}. {{value|Two side}} means the color of the interior side of faces is the same as the color of the exterior side. {{value|One side}} means their color is either the [[#3D_View|backlight color]], if enabled, or black.
| Specification of the default size for new [[Glossary#Vertex|vertices]]
|-
|-
| {{MenuCommand|Bounding box color}}
| {{MenuCommand|Show bounding-box for highlighted or selected meshes}}
| If checked, the default value for the {{PropertyView|Selection Style}} property is {{value|BoundBox}} instead of {{value|Shape}}. {{value|BoundBox}} means a highlighted bounding box is displayed if meshes are highlighted or selected. {{value|Shape}} means the shape itself is then highlighted.
| Selection of the color of [[Property_editor#View|bounding boxes]] in the 3D view
|-
|-
| {{MenuCommand|Default text color}}
| {{MenuCommand|Define normal per vertex}}
| If checked, [https://en.wikipedia.org/wiki/Phong_shading Phong shading] is used, otherwise flat shading. Shading defines the appearance of surfaces. With flat shading the surface normals are not defined per vertex. This leads to an unrealistic appearance for curved surfaces. While Phong shading leads to a more realistic, smoother appearance.
| Selection of the default text color for document annotations. There is currently no dialog to add annotations to documents. Annotations can only be added using the Python console with this command:
|-
| {{MenuCommand|Crease angle}}
| The crease angle is a threshold angle between two faces. It can only be set if the option {{MenuCommand|Define normal per vertex}} is used.
:If face angle ≥ crease angle, facet shading is used.
:If face angle < crease angle, smooth shading is used.
|}


[[Image:Preferences_Display_Tab_Mesh_view.png]]
<code>obj=App.ActiveDocument.addObject("App::Annotation", "Label")</code>


<span id="Workbenches"></span>
This console is shown using the menu {{MenuCommand|View → Panels → Python console}}.
==Arbeitsbereiche==

Dieser Abschnitt der Voreinstellungen hat nur eine Registerkarte: Verfügbare Arbeitsbereiche.

<span id="Available_Workbenches"></span>
===Verfügbare Arbeitsbereiche===

These preferences control workbench loading.

On the ''Available Workbenches'' tab you can specify the following:

{| class="wikitable float-right mw-collapsible mw-collapsed"
!style="width: 33%;"|Name
!style="width: 66%;"|Description
|-
| {{MenuCommand|Workbench list}}
| The list displays all installed workbenches. The list can be reordered by drag and drop ({{Version|0.21}}) and sorted by right-clicking the list and selecting {{MenuCommand|Sort alphabetically}} ({{Version|0.22}}). The order of the list also determines the order of the [[Std_Workbench|Workbench selector]].
* {{Version|0.21}}: {{MenuCommand|First checkbox in each row}}: If checked, the workbench will be available in the Workbench selector in the next FreeCAD session. The start up workbench cannot be unchecked. Unchecked workbenches are moved to the bottom of the list.
* {{MenuCommand|Auto-load}}: If checked, the workbench will auto-load when FreeCAD starts. Loading more workbenches will make the start up slower, but switching between workbenches that have already been loaded is faster.
* {{Button|Load}}: Press this button to load the workbench in the current FreeCAD session.
|-
| {{MenuCommand|Start up workbench}}
| The workbench that is activated when FreeCAD starts.
|-
| {{MenuCommand|Workbench selector position}} {{Version|0.21}}
| Defines where the [[Std_Workbench|Workbench selector]] appears. The options are:
* '''Toolbar''': In a dedicated toolbar.
* '''Left corner''': In the left corner of the menubar.
* '''Right corner''': In the right corner of the menubar.
|-
| {{MenuCommand|Remember active workbench by tab}}
| If checked, FreeCAD will remember and restore the workbench that was active for each tab in the [[Main_view_area|Main view area]].
|}
|}


[[Image:Preferences_Workbenches_Tab_Available_Workbenches.png]]
<div class="mw-translate-fuzzy">
[[Image:Preference_Display_Tab_03.png|left]]
</div>


===Mesh view===
==Python==


This preferences section ({{Version|0.21}}) has three tabs: Macro, Python console and Editor.
This tab is only shown if you are in the [[Mesh_Workbench|Mesh Workbench]] or if you have been in this workbench before.

<span id="Macro"></span>
===Makro===

Auf der Registerkarte ''Makro'' kann Folgendes eingestellt werden:

{| class="wikitable float-right mw-collapsible mw-collapsed"
!style="width: 33%;"|Name
!style="width: 66%;"|Beschreibung
|-
| {{MenuCommand|Makros in lokaler Umgebung ausführen}}
| Wenn angehakt, werden durch Makros definierte Variablen als lokale Variablen erstellt, andernfalls als globale Python Variable.
|-
| {{MenuCommand|Makro Pfad}}
| Legt den Pfad zu den Makro-Dateien fest.
|-
| {{MenuCommand|Aufzeichnung von GUI Befehlen}}
| Wenn angehakt, enthält [[Std_DlgMacroRecord/de|Aufgezeichnete Makros]] auch Benutzeroberflächenbefehle.
|-
| {{MenuCommand|Aufzeichnung als Kommentar}}
| Wenn diese Option angehakt ist, enthält [[Std_DlgMacroRecord/de|Aufgezeichnete Makros]] auch Benutzeroberflächenbefehle, jedoch als Kommentare. Dies ist nützlich, wenn du beim Ausführen des Makros keine sichtbaren Aktionen ausführen willst, sondern sehen willst, was sichtbar getan werden könnte.
|-
| {{MenuCommand|Skriptbefehle in der Python Konsole anzeigen}}
| Wenn diese Option aktiviert ist, werden die von den Makroskripten ausgeführten Befehle in der Python Konsole angezeigt. Diese Konsole kann über den Menüeintrag {{MenuCommand|Ansicht → Paneele → Python-Konsole}} geöffnet werden.
|-
| {{MenuCommand|Länge der Liste der aktuellen Makros}}
| Steuert die Anzahl der aktuellen Makros im Menu.
|-
| {{MenuCommand|Verknüpfungsanzahl}}
| Steuert die Anzahl der aktuellen Makros, denen dynamisch Kurzbefehle zugeordnet werden.
|-
| {{MenuCommand|Tastatur Modifikatoren}}
| Steuert, welche Tastatur-Modifikatoren für die Kurzbefehle verwendet werden, z.B. erstellt '''Strg+Shift+''' Kurzbefehle in der Form '''Strg+Shift+1''', '''Strg+Shift+2''', etc.
|}

[[Image:Preferences_Python_Tab_Macro.png]]

<span id="Python_console"></span>
===Python-Konsole===

Diese Einstellungen steuern das Verhalten der [[Python_console/de|Python-Konsole]]. Dieses Fenster wird über den Menüeintrag {{MenuCommand|Ansicht → Paneele → Python-Konsole}} geöffnet.

Note that the color and font settings for the console are defined on the [[#Editor|Editor]] tab.

Auf der Registerkarte ''Python-Konsole'' ({{Version/de|0.20}}) kann Folgendes eingestellt werden:


In the ''Mesh view'' tab you can specify the following:
{| class="wikitable float-right mw-collapsible mw-collapsed"
{| class="wikitable float-right mw-collapsible mw-collapsed"
!style="width: 33%;"|Name
!style="width: 33%;"|Name
!style="width: 66%;"|Description
!style="width: 66%;"|Description
|-
|-
| {{MenuCommand|Default mesh color}}
| {{MenuCommand|Enable word wrap}}
| If checked, words will be wrapped if they exceed the available horizontal space in the console.
| Selection of the default color for new meshes
|-
|-
| {{MenuCommand|Default line color}}
| {{MenuCommand|Enable block cursor}}
| Selection of the default line color for new meshes
| If checked, the cursor will have a block shape.
|-
|-
| {{MenuCommand|Mesh transparency}}
| {{MenuCommand|Save history}}
| If checked, Python history is saved across sessions.
| Specification of the default mesh transparency for new meshes
|}

[[Image:Preferences_Python_Tab_Python_console.png]]

===Editor===

Diese Einstellungen steuern das Verhalten des [[Std_DlgMacroExecute/de#Edit|Makroeditors]]. Dieser Editor kann über den Menüeintrag {{MenuCommand|Makro → Makros... → Erstellen}} geöffnet werden.

Die Farb- und Schrifteinstellungen werden auch von der [[#Python-Konsole|Python-Konsole]] verwendet.

Auf der Registerkarte ''Editor'' kann Folgendes eingestellt werden:

{| class="wikitable float-right mw-collapsible mw-collapsed"
!style="width: 33%;"|Name
!style="width: 66%;"|Beschreibung
|-
|-
| {{MenuCommand|Line transparency}}
| {{MenuCommand|Zeilennummern einschalten}}
| Wenn markiert, werden die Codezeilen nummeriert.
| Specification of the default line transparency for new meshes
|-
|-
| {{MenuCommand|Two-side rendering}}
| {{MenuCommand|Block-Eingabezeiger aktivieren}}
| Wenn aktiviert, wird der Eingabezeiger als gefülltes Rechteck dargestellt.
| If checked, the bottom side of the surface will be rendered the same way than the top side. If not checked, it depends on the option {{MenuCommand|Enable backlight color}} (see section [[Preferences_Editor#3D_View|3D view]]). Either the backlight color will be used or black.
|-
|-
| {{MenuCommand|Show bounding-box for highlighted or selected meshes}}
| {{MenuCommand|Tabulator Größe}}
| Legt das Tabulatorraster (Anzahl der Leerzeichen) fest. Wenn es z.B. auf '6' gesetzt ist, wird durch Drücken von {{KEY|Tab}} zum Zeichen 7 oder 13 oder 19 usw. gesprungen, abhängig von der aktuellen Cursorposition. Diese Einstellung wird nur verwendet, wenn {{MenuCommand|Tabulatoren behalten}} ausgewählt ist.
| If checked, a yellow bounding box will be displayed for highlighted or selected meshes.
|-
|-
| {{MenuCommand|Define normal per vertex}}
| {{MenuCommand|Einrückungsgröße}}
| Legt fest, wie viele Leerzeichen eingefügt werden, wenn {{KEY|Tab}} gedrückt wird. Diese Einstellung wird nur verwendet, wenn {{MenuCommand|Einfügen Leerzeichen}} ausgewählt ist.
| If checked, [https://en.wikipedia.org/wiki/Phong_shading Phong shading] is used, otherwise flat shading. Shading defines the appearance of surfaces.
|-
With flat shading the surface normals are not defined per vertex that leads to a unreal appearance for curved surfaces while using Phong shading leads to a smoother appearance.
| {{MenuCommand|Tabulatoren behalten}}
| Falls ausgewählt, wird durch Drücken von {{KEY|Tab}} ein Tabulator mit dem durch {{MenuCommand|Tabulatorgröße}} definierten Raster eingefügt
|-
| {{MenuCommand|Leerzeichen einfügen}}
| Falls ausgewählt, wird durch Drücken von {{KEY|Tab}} die durch {{MenuCommand|Einrückungsgröße}} definierte Anzahl von Leerzeichen eingefügt
|-
| {{MenuCommand|Elemente anzeigen}}
| Legt den Codetyp fest, dem die Farb- und Schrifteinstellungen zugeordnet werden. Das Ergebnis wird im Feld {{MenuCommand|Vorschau}} dargestellt.
|-
| {{MenuCommand|Familie}}
| Legt die Schriftfamilie fest, die für den gewählten Codetyp verwendet werden soll.
|-
| {{MenuCommand|Größe}}
| Legt die Schriftgröße fest, die für den gewählten Codetyp verwendet werden soll.
|-
| {{MenuCommand|Farbe}}
| Legt die Farbe fest, die für den gewählten Codetyp verwendet werden soll.
|-
|-
| {{MenuCommand|Crease angle}}
| The crease angle is a threshold angle between two faces. It can only be set if the option {{MenuCommand|Define normal per vertex}} is used.
:If face angle ≥ crease angle, facet shading is used
:If face angle < crease angle, smooth shading is used
|}
|}


[[Image:Mesh View Preferences.png]]
[[Image:Preferences_Python_Tab_Editor.png]]

<span id="Addon_Manager"></span>
==Addon-Manager==

Dieser Abschnitt der Voreinstellungen hat nur eine Registerkarte: Addon manager options.

===Addon manager options===

Diese Einstellungen steuern das Verhalten des [[Std AddonMgr/de|Addon-Managers]].

Auf der Registerkarte ''Addon manager options'' ({{Version/de|0.20}}) kann Folgendes eingestellt werden:

{| class="wikitable float-right mw-collapsible mw-collapsed"
!style="width: 33%;"|Name
!style="width: 66%;"|Description
|-
| {{MenuCommand|Automatically check for updates at start (requires git)}}
| If checked, the Addon manager will check for updates when it is launched. Git must be installed for this to work.
|-
| {{MenuCommand|Download Macro metadata (approximately 10MB)}}
| If checked, macro metadata is downloaded for display in the Addon manager's main addon listing. This data is cached locally.
|-
| {{MenuCommand|Cache update frequency}}
| Controls the frequency with which the locally cached addon availability and metadata information is updated. The options are:
* '''Manual (no automatic updates)'''
* '''Daily'''
* '''Weekly'''
|-
| {{MenuCommand|Hide Addons marked Python 2 Only}}
| If checked, addons marked as "Python 2 Only" are not included in the listing. These addons are unlikely to work in the current FreeCAD version.
|-
| {{MenuCommand|Hide Addons marked Obsolete}}
| If checked, addons marked as "Obsolete" are not included in the listing.
|-
| {{MenuCommand|Hide Addons that require a newer version of FreeCAD}}
| If checked, addons that require a newer FreeCAD version are not included in the listing.
|-
| {{MenuCommand|Custom repositories}}
| Custom repositories can be specified here.

To add a repository press the {{Button|[[Image:List-add.svg|16px]]}} button. Both the {{MenuCommand|Repository URL}} and the {{MenuCommand|Branch}}, typically {{Value|master}} or {{Value|main}}, must be specifies in the dialog that opens. {{Version|0.21}}

To remove a repository select it in the list and press the {{Button|[[Image:List-remove.svg|16px]]}} button. {{Version|0.21}}
|-
| {{MenuCommand|Proxy}}
| The Addon manager includes experimental support for proxies requiring authentication, set up as user-defined proxies.
|-
| {{MenuCommand|Python executable (optional)}}
| The Addon manager attempts to determine the Python executable that should be used for the automatic pip-based installation of Python dependencies. To override this selection, the path to the executable can be set here.
|-
| {{MenuCommand|git executable (optional)}}
| The Addon manager attempts to determine the git executable. To override this selection, the path to the executable can be set here. {{Version|0.21}}
|-
| {{MenuCommand|Show option to change branches (requires git)}}
| If checked, the Addon manager provides an interface on the addon's details screen that allows switching which git branch is currently checked out. This is intended for advanced users only, as it is possible that a non-primary-branch version of an addon may result in instability and compatibility issues. Git must be installed for this to work. Use with caution.
|-
| {{MenuCommand|Disable git (fall back to ZIP downloads only)}}
| If checked, git downloads are disabled. {{Version|0.21}}
|-
| {{MenuCommand|Addon developer mode}}
| If checked, Addon manager options intended for developers of addons are activated. {{Version|0.21}}
|}

[[Image:Preferences_Addon_Manager_Tab_Addon_manager_options.png]]

==Import-Export==

Die Import-Export-Einstellungen beeinflussen wie Dateien in FreeCAD importiert und exportiert werden. Sie sind auf der Seite [[Import_Export_Preferences/de|Import Export Einstellungen]] beschrieben.

<span id="Workbench_related_preferences"></span>
==Einstellungen der Arbeitsbereiche==

Einstellungen für die eingebauten Arbeitsbereiche sind nachfolgend verknüpft. Diese Verknüpfungen sind auch unter [[:Category:Preferences]] aufgelistet. Einige Arbeitsbereiche haben keine Einstellungen.

* [[Arch_Preferences/de|Arch Einstellungen]]
* [[Draft_Preferences/de|Draft Einstellungen]]
* [[FEM_Preferences/de|FEM Einstellungen]]
* Inspection Einstellungen (keine)
* [[Mesh_Workbench/de#Einstellungen|Mesh Design Einstellungen]]
* [[OpenSCAD_Preferences/de|OpenSCAD Einstellungen]]
<!--Die PartDesign Einstellungen werden im Arbeitsbereich Part festgelegt und beide Arbeitsbereiche, PartDesign und Part, verwenden sie-->
* Part Einstellungen: der Arbeitsbereich Part verwendet auch die [[PartDesign_Preferences/de|PartDesign Einstellungen]]
* [[PartDesign_Preferences/de|PartDesign Einstellungen]]
* [[Path_Preferences/de|Path Einstellungen]]
* Points Einstellungen (keine)
* [[Raytracing_Preferences/de|Raytracing Einstellungen]]
* Reverse Engineering Einstellungen (keine)
* Robot Einstellungen (keine)
* [[Sketcher_Preferences/de|Sketcher Einstellungen]]
* [[Spreadsheet_Preferences/de|Spreadsheet Einstellungen]]
* [[Start_Preferences/de|Start Einstellungen]]
* Surface Einstellungen (keine)
* [[TechDraw_Preferences/de|TechDraw Einstellungen]]
* Test Framework Einstellungen (keine)
* Web Einstellungen (keine)


<span id="Scripting"></span>
==Import-Export Einstellungen==
==Skripten==


{{Emphasis|Siehe auch:}} [[FreeCAD_Scripting_Basics/de|FreeCAD Grundlagen Skripten]].
The Import-Export settings affect how files are imported and exported to and from FreeCAD. They are described in the page [[Import Export Preference|Import Export Preference]].


For a scripting example see [[Std_DlgParameter|Std DlgParameter]].
==Arbeitsbereicheinstellungen==
Einstellungen für die gebräuchlicheren Arbeitsbereiche findest Du nachfolgend. Einige Arbeitsbereiche haben keine Einstellungen. Andere optionale Arbeitsbereiche sind möglicherweise nicht aufgeführt.


<span id="Related"></span>
* [[Arch Preferences|Arch Preferences]]
==Verwandt==
* [[Draft Preferences|Draft Preferences]]
* Drawing Preferences (none)
* [[Fem Preferences|Fem Preferences]]
* Image Preferences (none)
* Inspection Preferences (none)
* Mesh Design Preferences (none)
* [[OpenSCAD_Preferences|OpenSCAD Preferences]]
* Part Preferences (none)
* [[PartDesign Preferences|PartDesign Preferences]]
* [[Path_Preferences|Path Preferences]]
* Plot Preferences (none)
* Points Preferences (none)
* [[Raytracing_Preferences|Raytracing Preferences]]
* Reverse Engineering Preferences (none)
* Robot Preferences (none)
* Ship Preferences (none)
* [[Sketcher_Preferences|Sketcher Preferences]]
* Spreadsheet Preferences (none)
* [[Start Preferences|Start Preferences]]
* Surface Preferences (none)
* [[TechDraw Preferences#Preferences|TechDraw Preferences]]
* Test Framework Preferences (none)
* Web Preferences (none)


* [[Std_DlgParameter/de|Parametereditor]]
===Externe Arbeitsbereiche===
* [[Fine-tuning/de|Feinabstimmung]]


* [[A2plus_Workbench#Preferences/de|A2plus Voreinstellungen]]


{{Docnav/de
{{docnav/de|[[Document structure/de|Dokumentstruktur]]
|[[Interface_Customization/de|Anpassung der Oberfläche]]
|[[Interface Customization/de|Benutzeroberfläche anpassen]]
|[[Import_Export_Preferences/de|Import Export Einstellungen]]
}}
}}


[[Category:Preferences{{#translation:}}]]
{{Userdocnavi/de}}
{{Userdocnavi{{#translation:}}}}

Latest revision as of 12:11, 27 January 2024

Einleitung

Zum Start des Voreinstellungseditors wähl man den Menüeintrag Bearbeiten → Einstellungen.... Im macOS erscheint die Menüoption Einstellungen... im FreeCAD-Menü anstatt im Bearbeitungsmenü (ersteres ist der vorgegebene Ort für Einstellungen auf dem Mac).

FreeCAD verwendet ein Arbeitsbereich-Konzept, bei dem jeder Arbeitsbereich für bestimmte Aufgaben und Funktionen zuständig ist. Ein Arbeitsbereich kann seine eigenen Voreinstellungen haben. Diese werden nur im Voreinstellungseditor angezeigt, normalerweise in einem fest zugeordneten Abschnitt, wenn der Arbeitsbereich in der aktuellen FreeCAD-Sitzung geladen ist. Einige Arbeitsbereiche beinhalten zusätzliche Unterstützung für besondere Import- und Exportformate. Wenn sie dazugehörige Voreinstellungen enthalten, werden diese auf einer oder mehreren zusätzlichen Registerkarten im Abschnitt Import-Export des Voreinstellungseditors angezeigt.

Um Resourcen zu schonen, lädt FreeCAD nicht automatisch alle vorhandenen Arbeitsbereich. Siehe Arbeitsbereiche für Weitere Informationen. Eine Liste mit Einstellungen im Zusammenhang mit Arbeitsbereichen ist unter Einstellungen der Arbeitsbereiche zu finden.

Wenn kein Arbeitsbereich geladen ist, erscheinen sechs Abschnitte im Voreinstellungseditor: Allgemein, Anzeige, Arbeitsbereiche, Python, Addon-Manager und Import / Export. Weitere hinzugeladene Arbeitsbereiche mit eigenen Voreinstellungen erscheinen unter diesen.

Das Drücken der Schaltfläche Zurücksetzen in der linken unteren Ecke des Voreinstellungsdialogs öffnet ein Menü (eingeführt mit Version 0.22) mit Optionen zum Zurücksetzen der Einstellungen auf ihre Standardwerte. Es kann der aktuelle Menüreiter, die aktuelle Gruppe oder alle Einstellungen zurückgesetzt werden. In Version 0.21 und darunter setzt die Schaltfläche alle Einstellungen zurück.

Einige fortgeschrittene Einstellungen können nur im Parameter-Editor geändert werden. Die Seite Fine-tuning führt einige auf.

Allgemein

Dieser Abschnitt der Voreinstellungen hat standardmäßig sieben Registerkarten: Allgemein, Dokument, Auswahl, Cache, Benachrichtigungsbereich, Ausgabefenster und Hilfe.

In Version 0.21 und darunter steht die siebente Registerkarte Hilfe nur dann zur Verfügung, wenn das Hilfe-Addon mit dem Addon-Manager installiert wurde.

Allgemein

Auf der Registerkarte "Allgemein" kann Folgendes festgelegt werden:

Name Description
Sprache Sprache der Benutzeroberfläche der Anwendung.
Standardeinheitensystem Einheitensystem für alle Bereiche der Anwendung.eingeführt mit Version 0.22: Wird als Standardwert für das Dokumenten-Einheitensystem neuer Dokumente.
Anzahl der Nachkommastellen Anzahl der Nachkommastellen, die für Zahlen und Maße angezeigt werden sollen.
Projekteinheitensystem ignorieren und Standard verwenden eingeführt mit Version 0.22 Wenn aktiviert, werden Projekteinheitensysteme ignoriert und überschreiben nicht das Standardeinheitensystem.
Kleinster Zollteiler eingeführt mit Version 0.22 Der kleinste Zollteiler, der für Zahlen und Maße angezeigt werden soll. Steht nur für Einheitensysteme zur Verfügung, die Zoll-Bruchwerte verwenden.
Zahlenformat eingeführt mit Version 0.20 Legt das Zahlenformat fest. Optionen sind:
  • Betriebssystem: Das vom Betriebssystem festgelegte Dezimaltrennzeichen wird verwendet.
  • Ausgewählte Sprache: Das Dezimaltrennzeichen wird entsprechend der ausgewählten Sprache von FreeCADs Benutzerschnittstelle verwendet.
  • C/POSIX: Ein Punkt wird als Dezimaltrennzeichen verwendet.
Dezimaltrennzeichen ersetzen eingeführt mit Version 0.20 Wenn aktiviert, wird das Dezimaltrennzeichen des Ziffernblocks durch das in der Einstellung Zahlenformat festgelegte Trennzeichen ersetzt. eingeführt mit Version 0.21: Man beachte, dass, wenn diese Einstellung aktiviert ist, in der Python-Konsole und dem Makro-Editor immer ein ein Punkt ausgegeben wird, wenn das Dezimaltrennzeichen des Ziffernblocks verwendet wird.
Thema Legt ein Thema zum Anpassen des Aussehens der Benutzerschnittstelle fest.
Bildgröße in Symbolleisten Legt die Größe der Symbole in den Symbolleisten fest. Die Optionen sind:
  • Klein (16px)
  • Mittel (24px)
  • Groß (32px)
  • Extra Groß (48px)
Baumstruktur-Ansichtsmodus Legt fest, wie die Baumansicht in der Benutzerschnittstelle dargestellt wird (Neustart erforderlich). Die Optionen sind:
  • Combo-Ansicht: Kombiniert die Baumansicht und den Eingenschafteneditor in einem Fenster.
  • Baumansicht und Eingenschafteneditor: Teilt die Baumansicht und den Eingenschafteneditor in separate Fenster auf.
  • Beide: Zeigt alle drei Fenster. Version 0.21 und darunter
Anzahl der zuletzt benutzten Dateien Legt fest, wie viele Dateien in der Liste der zuletzt verwendeten Dateien gelistet werden sollen.

Optionally, imported files can be excluded from this list, and exported files can be included. See Fine-tuning.

Enable tiled background If checked, the background of FreeCAD's main window will by default consist of tiles of this image:

Diese Option hat nur dann einen Effekt, falls keine Formatvorlage ausgewählt ist.

Das Bild kann geändert werden, indem die Ordner Gui/Images im Ordner hinzufügt werden:

%APPDATA%/FreeCAD (in Windows),

$HOME/.FreeCAD (auf Linux) oder

$HOME/Library/Preferences/FreeCAD (auf macOS).

Eine Datei mit dem Namen background.png in den Ordner Images legen und diese Option deaktivieren/aktivieren, um die geänderte Datei anzuzeigen.

Startbildschirm beim Starten anzeigen Wenn diese Option aktiviert ist, wird der Startbildschirm beim Start von FreeCAD angezeigt.

Der Begrüßungsbildschirmbild kann geändert werden, indem eine Datei namens splash_image.png in den Ordner Images} gestellt wird, der unter Gekachelten Hintergrund aktivieren bereits erwähnt wurde.

Blinken des Eingabezeigers aktivieren Wenn aktiviert, wird der Textingabezeiger in der Python-Konsole und im Makroeditor blinken.
Überlagerung aktivieren eingeführt mit Version 0.22 Wenn aktiviert, werden angedockte Fenster wie transparente Überlagerungen behandelt.
Präferenz-Pakete eingeführt mit Version 0.20 Listet die vorhandenen Voreinstellungspakete und ermöglicht auch sie zu importieren, sichern, verwalten und rückzusetzen.

Dokument

Auf der Registerkarte "Dokument" kann Folgendes festgelegt werden:

Name Description
Create new document at start up If checked, FreeCAD will create a new document when started.
Document save compression level Specifies the compression level for FCStd files. FCStd files are ZIP-compressed files. Therefore you can rename their suffix .FCStd to .zip and open them with a ZIP archive program.
Using Undo/Redo on documents If checked, all changes in documents are stored so that they can be undone/redone.
Maximum Undo/Redo steps Specifies how many Undo/Redo steps should be recorded.
Allow aborting recomputation If checked, recomputations can be aborted by pressing Esc. This may slightly increase the recomputation time.
Run AutoRecovery at startup If there is a recovery file available FreeCAD will automatically run a file recovery when it is started. This way files can be restored if a crash occurred.
Save AutoRecovery information every Specifies how often a recovery file is written.
Save thumbnail into project file when saving document If checked, a thumbnail will be stored when the document is saved. The thumbnail will for example be shown in the list of recent files in the Start Workbench. It is possible to select a Size between 128×128 and 512×512 pixels for the thumbnail. Common sizes are powers of two: 128, 256, 512.
Add the program logo to the generated thumbnail If checked, the FreeCAD program logo will be added to the thumbnail.
Maximum number of backup files to keep when resaving document If checked, backup files will be kept when saving the document. You can specify the number of backup files to keep. Backup files are previously saved versions of the document. The first backup file will have the file suffix .FCStd1, the second .FCStd2 and so on.
Use date and FCBak extension If checked, backup files will get the extension .FCbak and their file names get a date suffix according to the specified Date format. For a description of the date format see Date & time formats cheatsheet.

With the default settings a backup file will for example get this name TD-Cube.20200315-215654.FCBak (original filename is TD-Cube.FCStd).

Allow duplicate object labels in one document If checked, objects can have the same label.
Disable partial loading of external linked objects If partial loading of external linked objects is enabled, only the referenced objects and their dependencies will be loaded when the linked document is auto opened together with the main document. Such a partially loaded document cannot be edited. Double click the document icon in the tree view to reload it in full. A more detailed explanation of this feature can be found on the Assembly3 documentation page.
Author name All created documents will get the specified author name. Keep the author field blank if you do not want to include this information. If the option Set on save is checked, the field Last modified by will be set to the specified author when saving the file. This field can be viewed using the File → Project information menu option.
Company All created documents will get the specified company name.
Default license Specifies the license for new documents. For predefined licenses the License URL will automatically be set accordingly. Select Other for a custom license.
License URL Specifies an URL describing the license selected in Default license.

Auswahl

Auf der Registerkarte "Auswahl" kann Folgendes festgelegt werden:

Name Description
Auto switch to the 3D view containing the selected item Enables the Tree view SyncView mode.
Auto expand tree item when the corresponding object is selected in 3D view Enables the Tree view SyncSelection mode.
Preselect the object in 3D view when mouse over the tree item Enables the Tree view PreSelection mode.
Record selection in tree view in order to go back/forward using navigation button Enables the Tree view RecordSelection mode.
Add checkboxes for selection in document tree Each Tree view item will get a checkbox. This is for example useful for selecting multiple items on a touchscreen.

Cache

Diese Eigenschaften beziehen sich auf den Cache-Ordner, in dem FreeCAD vorübergehend Dateien (temporary files) speichert

Auf der Registerkarte Cache (eingeführt mit Version 0.20) kann Folgendes eingestellt werden:

Name Description
Ort Nennt den Pfad zum Cache-Verzeichnis.
Prüfen sie regelmäßig zum Programmstart: Steuert, wie oft die Ordnergöße geprüft wird. Die Auswahlmöglichkeiten sind:
  • Immer
  • Täglich
  • Wöchentlich
  • Monatlich
  • Jährlich
  • Nie
Limit der Cache-Größe: Nennt die maximale Größe des Ordners. Es wird angezeigt, wenn eine Prüfung durchgeführt wurde und die Größe des Ordners diesen Wert übersteigt. Die Auswahlmöglichkeiten sind:
  • 100 MB
  • 300 MB
  • 500 MB
  • 1 GB
  • 2 GB
  • 3 GB
Aktuelle Cache-Größe: Zeigt die aktuelle Ordnergröße, wenn möglich. Jetzt prüfen ´... klicken umd den Wert zu aktualisieren.

Benachrichtigungsbereich

These preferences control the Notification Area and its notifications.

Auf der Registerkarte Notification Area (eingeführt mit Version 0.21) kann Folgendes eingestellt werden:

Name Description
Enable Notification Area If checked, the Notification Area will appear in the status bar.
Enable non-intrusive notifications If checked, non-intrusive notifications will appear next to the Notification Area in the status bar.
Errors If checked, errors will appear in the Notification Area.
Warnings If checked, warnings will appear in the Notification Area.
Maximum Duration Maximum duration during which notifications are shown (unless mouse buttons are clicked).
Minimum Duration Minimum duration (idem).
Maximum Number of Notifications Maximum number of notifications shown simultaneously.
Notification width Width of the Notification Area in pixels.
Hide when other window is activated If checked, open notifications will disappear when another window is activated.
Do not show when inactive If checked, notifications will not appear if the FreeCAD window is not the active window.
Maximum Messages (0 = no limit) The maximum number of messages kept in the list. Set to 0 for no limit.
Auto-remove User Notifications If checked, notifications will be removed from the message list when the Maximum Duration has elapsed.

Ausgabefenster

Diese Einstellungen steuern das Verhalten der Ausgabefenster. Dieses Fenster wird über den Menüeintrag Ansicht → Paneele → Ausgabefenster geöffnet.

Auf der Registerkarte Ausgabefenster kann Folgendes eingestellt werden:

Name Description
Record normal messages If checked, normal messages will be recorded. They will be displayed in the Report view with the color set in Normal messages.
Record log messages If checked, log messages will be recorded. They will be displayed in the Report view with the color set in Log messages.
Record warnings If checked, warnings will be recorded. They will be displayed in the Report view with the color set in Warnings.
Record error messages If checked, error messages will be recorded. They will be displayed in the Report view with the color set in Errors.
Show report view on error If checked, the Report view will be shown automatically when an error is recorded.
Show report view on warning If checked, the Report view will be shown automatically when a warning is recorded.
Show report view on normal message If checked, the Report view will be shown automatically when a normal message is recorded.
Show report view on log message If checked, the Report view will be shown automatically when a log message is recorded.
Include a timecode for each entry If checked, each message and warning will receive a timecode.
Normal messages Specifies the font color for normal messages.
Log messages Specifies the font color for log messages.
Warnings Specifies the font color for warning messages.
Errors Specifies the font color for error messages.
Redirect internal Python output to report view If checked, internal Python output will be redirected from the Python console to the Report view.
Redirect internal Python errors to report view If checked, internal Python error messages will be redirected from the Python console to the Report view.

Help

Auf der Registerkarte Help kann Folgendes eingestellt werden:

Name Description
Help location Specifies the location of the Help files. The options are:
  • Online: Enter the URL or leave blank to use the automatic GitHub URL.
Translation suffix: If https://wiki.freecad.org/ is used, a language suffix can be specified. Use for example fr for the French translation. Must be blank for the GitHub URL.
  • From disk location: Enter the path where the downloaded FreeCAD documentation can be found. To download the documentation select the offline-documentation addon from the Workbenches list in the Addon Manager.
Display Specifies where the documentation should be displayed. The options are:
  • In a new FreeCAD tab: The documentation is displayed on a new tab in the Main view area.
  • In your default web browser: The documentation is displayed in the default web browser.
  • In a separate, embeddable, dialog: The documentation is displayed in a separate dialog. This dialog can be docked on top of the Combo view for example.
Custom stylesheet Specifies an optional custom stylesheet. Not used for the Wiki URL.

Anzeige

Dieser Einstellungsabschnitt enthält drei allgemeine Registerkarten, 3D-Ansicht, Navigation und Farben. Eine vierte, Netze, wird hinzugefügt, wenn der Netze-Arbeitsbereich geladen wurde.

3D-Viewer

Auf der Registerkarte 3D-Viewer kann Folgendes eingestellt werden:

Name Beschreibung
Show coordinate system in the corner / Koordinatensystem in Ecke anzeigen Wenn aktiviert, wird das Haupkoordinatensystem in der rechten unteren Ecke der 3D-Ansicht angezeigt.

Die Eigenschaft Relative Größe (eingeführt mit Version 0.20) legt die Größe der Darstellung als prozentuale Größe der Ansicht fest (das Minimum ihrer Höhe und Breite).

Show axis cross by default / Achsenkreuz standardmäßig anzeigen Wenn aktiviert, wird das Achsenkreuz standardmäßig in der 3D-Ansicht angezeigt.
Show counter of frames per second / Anzeigen der Datenrate pro Sekunde Wenn aktiviert, wird die für die letzte Aktion benötigte Zeit und die sich ergebende Bildrate in der unteren linken Ecke der 3D-Ansicht angezeigt.
Use software OpenGL / Software-OpenGL verwenden Wenn aktiviert, verwendet OpenGL die CPU anstatt der GPU. Diese Möglichkeit hilft bei der Fehlerbehebung bei Graphikkarten- und Treiberproblemen. Die Änderung dieser Möglichkeit erfordert einen Neustart der Anwendung.
Use OpenGL VBO (Vertex Buffer Object) / OpenGL VBO (Vertex Buffer Object) verwenden Wenn aktiviert, werden Vertex-Buffer-Objects (VBO) verwendet. Ein VBO ist ein OpenGL-Bestandteil, der Methoden zum Hochladen von Vertex-Daten (Position, Normalenvektor, Farbe usw.) zur Grafikkarte bereitstellt. VBOs bieten ordentliche Performance-Gewinne, da sich die Daten eher im Grafikspeicher befinden als im Hauptspeicher und so der GPU direkt zur verarbeitung bereit stehen. Für mehr Hintergrundinformation siehe Understanding OpenGL Objects.
Render Cache / Render Cache-Speicher "Render Cache" oder "Render Acceleration" wird etwas umfangreicher unter FreeCAD assembly3 render-caching erläutert. Es gibt drei Wahlmöglichkeiten:
  • Automatisch: Man lässt Coin3D entscheiden, wo zwischengespeichert wird (voreingestellt).
  • Verteilt: Manuelles Einschalten des Zwischenspeichers für alle view provider root nodes.
  • Zentralisiert: Manuelles Ausschalten des Zwischenspeicher für alle view provider root nodes and only cache at the scene graph root node. Dies bietet die höchste Render-Geschwindigkeit, hat aber eine langsamere Reaktion auf alle Szenenänderungen.
Anti-Aliasing / Kantenglättung Gibt an, ob und welche Art von multisample Anti-Aliasing verwendet wird.
Transparent objects / Transparente Objekte Legt die Art des Renderns transparenter Objekte fest. Die möglichkeiten sind:
  • Einzelner Render-Durchgang: Das Rendern wird in einem Durchgang ausgeführt (voreingestellt). Dies kann bei der Tiangulation zu Artefakten führen. Wenn diese auftreten, können sie durch die Zusätzlicher Rückseiten-Render-Durchgang vermieden werden.
  • Zusätzlicher Rückseiten-Render-Durchgang: Das Rendern wird in zwei Durchgängen ausgeführt. Rückwärts gerichtete Polygone werden im ersten Durchgang gerendert und vorwärts gerichtete Polygone im zweiten Durchgang.
Marker size / Markergröße Legt die Größe von Vertizes (Knotenpunkte) in der Arbeitsumgebung Sketcher fest. Der anklickbare Bereich der Punkte kann zusätzlich durch Vergrößerung des Auswahlradius erweitert werden .
Pick radius (px) / Auswahlradius (px) Stellt die Fläche zur Auswahl von Elementen in der 3D-Ansicht ein. Ein größerer Wert vereinfacht es objekte zu packen, kann aber dazu führen, dass einige kleine Objekte nicht mehr ausgewählt werden können.
Eye to eye distance for stereo modes / Augenabstand für Stereo-Modi Legt den Augenabstand für stereoskopische Projektionen fest. Der angegebene Wert ist ein Faktor, der mit der Größe der Bounding Box des aktuell dargestellten 3D-Objekts multipliziert wird.
Backlight color / Farbe der Hintergrundbeleuchtung Wenn aktiviert, wird die Hintergrundbeleuchtung mit der eingestellten Farbe eingeschaltet. Die Hintergrundbeleuchtung wird beim Rendern von Flächenrückseiten eingesetzt. Normaler Weise ist sie auf Solids nicht sichtbar, außer sie werden mit einer Schnittebene (auf-)geschnitten oder wenn Flächen nicht korrekt ausgerichtet sind. Es wird nur für Objekte verwendet, deren Eigenschaft Lighting (auf der Registerkarte Ansicht) auf One side gesetzt ist. Wenn deaktiviert, werden die Rückseiten der Flächen dieser Objektflächen schwarz dargestellt.

Die zugehörige Einstellung Intensity legt die Intensität der Hintergrundbeleuchtung fest.

Camera type / Kameratyp Legt die Projektionsart der Kamera fest. Die Wahlmöglichkeiten sind:
  • Perspektivische Darstellung: Objekte werden perspektivisch dargestellt.
(engl. perspective projection).
(engl. orthographic projection)

Navigation

Auf der Registerkarte Navigation kann Folgendes eingestellt werden:

Name Description
Navigation cube If checked, the Navigation cube will be shown in the 3D view.

Steps by turn defines the number of steps required for a full rotation when using the Navigation cube rotation arrows.

If Rotate to nearest is checked, the 3D view is rotated to the nearest most logical position, based on the current orientation of the cube, when a cube face is clicked. Else clicking a face will always result in the same rotation. introduced in version 0.20

Cube size defines the size of the cube. introduced in version 0.20

Color sets the base color for all elements. introduced in version 0.21

Corner defines where the Navigation cube is displayed in the 3D view. The options are:

  • Top left
  • Top right
  • Bottom left
  • Bottom right

Font name specifies the font used for the cube's texts. introduced in version 0.21

Font size sets the size of the font used for the cube's texts. introduced in version 0.21

3D Navigation Specifies a mouse navigation style. To see the details of each style, select it and then press the Mouse... button.
Orbit style Specifies the rotation orbit style used when in rotation mode. The options are:
  • Turntable: Moving the mouse will divide the rotation in steps, rotations around the different axes are performed sequentially.
  • Trackball: Rotations around the different axes are performed simultaneously.
  • Free Turntable: Like Trackball, but if possible the rotation axis is kept collinear with the global 3D view axis. introduced in version 0.21
Rotation mode Defines the rotation center. The options are:
  • Window center
  • Drag at cursor
  • Object center
Default camera orientation Specifies the camera orientation for new documents. This setting is also used by the Std ViewHome command.
Camera zoom Affects the initial camera zoom level for new documents. The value you set is the diameter of a sphere that fits in 3D view. The default is 100 mm. It also sets the initial size of origin features (base planes in new PartDesign Bodies and Std Parts).
Enable animation If checked, and 3D Navigation is set to CAD, rotations can be animated. If the mouse is moved while the scroll wheel and the right mouse button are pressed, the view is rotated. If one keeps the mouse moving while releasing the right mouse button, the rotation will continue. To end this animation left-click with the mouse.
Zoom at cursor If checked, zoom operations will be performed at the position of the mouse pointer. Otherwise zoom operations will be performed at the center of the current view. The Zoom step defines how much will be zoomed. A zoom step of 1 means a factor of 7.5 for every zoom step.
Invert zoom If checked, the direction of zoom operations will be inverted.
Disable touchscreen tilt gesture If checked, and 3D Navigation is set to Gesture, the tilting gesture will be disabled for pinch-zooming (two-finger zooming).
Enable rotation center indication If checked, the rotation center of the view is shown when dragging. introduced in version 0.22

Farben

Auf der Registerkarte Farben kann Folgendes eingestellt werden:

Name Description
Enable preselection highlighting If checked, preselection is turned on and the specified color will be used for it. Preselection means that for example edges of objects will be highlighted while hovering over them with the mouse to indicate they can be selected.
Enable selection highlighting If checked, selection highlighting is turned on and the specified color will be used for it.
Simple color If selected, the background of the 3D view will have the specified color.
Linear gradient If selected, the background of the 3D view will have a vertical color gradient defined by the specified Top and Bottom colors. if enabled, a Middle color can also be specified. Press the button (introduced in version 0.21) to switch the top and bottom colors.
Radial gradient introduced in version 0.21 If selected, the background of the 3D view will have a radial color gradient defined by the specified Central and End colors. if enabled, a Midway color can also be specified. Press the button to switch the central and end colors.
Object being edited Specifies the background color for objects in the tree view that are currently edited.
Active container Specifies the background color for active containers in the tree view. For example an active PartDesign Body will get this color.

Netz

Diese Registerkarte wird nur angezeigt, wenn der Arbeitsbereich Mesh geladen wurde.

Auf der Registerkarte Netz kann Folgendes eingestellt werden:

Name Description
Default mesh color Specifies the default face color.
Default line color Specifies the default line color.
Mesh transparency Specifies the default mesh transparency.
Line transparency Specifies the default line transparency.
Two-side rendering If checked, the default value for the AnsichtLighting property is Two side instead of One side. Two side means the color of the interior side of faces is the same as the color of the exterior side. One side means their color is either the backlight color, if enabled, or black.
Show bounding-box for highlighted or selected meshes If checked, the default value for the AnsichtSelection Style property is BoundBox instead of Shape. BoundBox means a highlighted bounding box is displayed if meshes are highlighted or selected. Shape means the shape itself is then highlighted.
Define normal per vertex If checked, Phong shading is used, otherwise flat shading. Shading defines the appearance of surfaces. With flat shading the surface normals are not defined per vertex. This leads to an unrealistic appearance for curved surfaces. While Phong shading leads to a more realistic, smoother appearance.
Crease angle The crease angle is a threshold angle between two faces. It can only be set if the option Define normal per vertex is used.
If face angle ≥ crease angle, facet shading is used.
If face angle < crease angle, smooth shading is used.

Arbeitsbereiche

Dieser Abschnitt der Voreinstellungen hat nur eine Registerkarte: Verfügbare Arbeitsbereiche.

Verfügbare Arbeitsbereiche

These preferences control workbench loading.

On the Available Workbenches tab you can specify the following:

Name Description
Workbench list The list displays all installed workbenches. The list can be reordered by drag and drop (introduced in version 0.21) and sorted by right-clicking the list and selecting Sort alphabetically (introduced in version 0.22). The order of the list also determines the order of the Workbench selector.
  • introduced in version 0.21: First checkbox in each row: If checked, the workbench will be available in the Workbench selector in the next FreeCAD session. The start up workbench cannot be unchecked. Unchecked workbenches are moved to the bottom of the list.
  • Auto-load: If checked, the workbench will auto-load when FreeCAD starts. Loading more workbenches will make the start up slower, but switching between workbenches that have already been loaded is faster.
  • Load: Press this button to load the workbench in the current FreeCAD session.
Start up workbench The workbench that is activated when FreeCAD starts.
Workbench selector position introduced in version 0.21 Defines where the Workbench selector appears. The options are:
  • Toolbar: In a dedicated toolbar.
  • Left corner: In the left corner of the menubar.
  • Right corner: In the right corner of the menubar.
Remember active workbench by tab If checked, FreeCAD will remember and restore the workbench that was active for each tab in the Main view area.

Python

This preferences section (introduced in version 0.21) has three tabs: Macro, Python console and Editor.

Makro

Auf der Registerkarte Makro kann Folgendes eingestellt werden:

Name Beschreibung
Makros in lokaler Umgebung ausführen Wenn angehakt, werden durch Makros definierte Variablen als lokale Variablen erstellt, andernfalls als globale Python Variable.
Makro Pfad Legt den Pfad zu den Makro-Dateien fest.
Aufzeichnung von GUI Befehlen Wenn angehakt, enthält Aufgezeichnete Makros auch Benutzeroberflächenbefehle.
Aufzeichnung als Kommentar Wenn diese Option angehakt ist, enthält Aufgezeichnete Makros auch Benutzeroberflächenbefehle, jedoch als Kommentare. Dies ist nützlich, wenn du beim Ausführen des Makros keine sichtbaren Aktionen ausführen willst, sondern sehen willst, was sichtbar getan werden könnte.
Skriptbefehle in der Python Konsole anzeigen Wenn diese Option aktiviert ist, werden die von den Makroskripten ausgeführten Befehle in der Python Konsole angezeigt. Diese Konsole kann über den Menüeintrag Ansicht → Paneele → Python-Konsole geöffnet werden.
Länge der Liste der aktuellen Makros Steuert die Anzahl der aktuellen Makros im Menu.
Verknüpfungsanzahl Steuert die Anzahl der aktuellen Makros, denen dynamisch Kurzbefehle zugeordnet werden.
Tastatur Modifikatoren Steuert, welche Tastatur-Modifikatoren für die Kurzbefehle verwendet werden, z.B. erstellt Strg+Shift+ Kurzbefehle in der Form Strg+Shift+1, Strg+Shift+2, etc.

Python-Konsole

Diese Einstellungen steuern das Verhalten der Python-Konsole. Dieses Fenster wird über den Menüeintrag Ansicht → Paneele → Python-Konsole geöffnet.

Note that the color and font settings for the console are defined on the Editor tab.

Auf der Registerkarte Python-Konsole (eingeführt mit Version 0.20) kann Folgendes eingestellt werden:

Name Description
Enable word wrap If checked, words will be wrapped if they exceed the available horizontal space in the console.
Enable block cursor If checked, the cursor will have a block shape.
Save history If checked, Python history is saved across sessions.

Editor

Diese Einstellungen steuern das Verhalten des Makroeditors. Dieser Editor kann über den Menüeintrag Makro → Makros... → Erstellen geöffnet werden.

Die Farb- und Schrifteinstellungen werden auch von der Python-Konsole verwendet.

Auf der Registerkarte Editor kann Folgendes eingestellt werden:

Name Beschreibung
Zeilennummern einschalten Wenn markiert, werden die Codezeilen nummeriert.
Block-Eingabezeiger aktivieren Wenn aktiviert, wird der Eingabezeiger als gefülltes Rechteck dargestellt.
Tabulator Größe Legt das Tabulatorraster (Anzahl der Leerzeichen) fest. Wenn es z.B. auf '6' gesetzt ist, wird durch Drücken von Tab zum Zeichen 7 oder 13 oder 19 usw. gesprungen, abhängig von der aktuellen Cursorposition. Diese Einstellung wird nur verwendet, wenn Tabulatoren behalten ausgewählt ist.
Einrückungsgröße Legt fest, wie viele Leerzeichen eingefügt werden, wenn Tab gedrückt wird. Diese Einstellung wird nur verwendet, wenn Einfügen Leerzeichen ausgewählt ist.
Tabulatoren behalten Falls ausgewählt, wird durch Drücken von Tab ein Tabulator mit dem durch Tabulatorgröße definierten Raster eingefügt
Leerzeichen einfügen Falls ausgewählt, wird durch Drücken von Tab die durch Einrückungsgröße definierte Anzahl von Leerzeichen eingefügt
Elemente anzeigen Legt den Codetyp fest, dem die Farb- und Schrifteinstellungen zugeordnet werden. Das Ergebnis wird im Feld Vorschau dargestellt.
Familie Legt die Schriftfamilie fest, die für den gewählten Codetyp verwendet werden soll.
Größe Legt die Schriftgröße fest, die für den gewählten Codetyp verwendet werden soll.
Farbe Legt die Farbe fest, die für den gewählten Codetyp verwendet werden soll.

Addon-Manager

Dieser Abschnitt der Voreinstellungen hat nur eine Registerkarte: Addon manager options.

Addon manager options

Diese Einstellungen steuern das Verhalten des Addon-Managers.

Auf der Registerkarte Addon manager options (eingeführt mit Version 0.20) kann Folgendes eingestellt werden:

Name Description
Automatically check for updates at start (requires git) If checked, the Addon manager will check for updates when it is launched. Git must be installed for this to work.
Download Macro metadata (approximately 10MB) If checked, macro metadata is downloaded for display in the Addon manager's main addon listing. This data is cached locally.
Cache update frequency Controls the frequency with which the locally cached addon availability and metadata information is updated. The options are:
  • Manual (no automatic updates)
  • Daily
  • Weekly
Hide Addons marked Python 2 Only If checked, addons marked as "Python 2 Only" are not included in the listing. These addons are unlikely to work in the current FreeCAD version.
Hide Addons marked Obsolete If checked, addons marked as "Obsolete" are not included in the listing.
Hide Addons that require a newer version of FreeCAD If checked, addons that require a newer FreeCAD version are not included in the listing.
Custom repositories Custom repositories can be specified here.

To add a repository press the button. Both the Repository URL and the Branch, typically master or main, must be specifies in the dialog that opens. introduced in version 0.21

To remove a repository select it in the list and press the button. introduced in version 0.21

Proxy The Addon manager includes experimental support for proxies requiring authentication, set up as user-defined proxies.
Python executable (optional) The Addon manager attempts to determine the Python executable that should be used for the automatic pip-based installation of Python dependencies. To override this selection, the path to the executable can be set here.
git executable (optional) The Addon manager attempts to determine the git executable. To override this selection, the path to the executable can be set here. introduced in version 0.21
Show option to change branches (requires git) If checked, the Addon manager provides an interface on the addon's details screen that allows switching which git branch is currently checked out. This is intended for advanced users only, as it is possible that a non-primary-branch version of an addon may result in instability and compatibility issues. Git must be installed for this to work. Use with caution.
Disable git (fall back to ZIP downloads only) If checked, git downloads are disabled. introduced in version 0.21
Addon developer mode If checked, Addon manager options intended for developers of addons are activated. introduced in version 0.21

Import-Export

Die Import-Export-Einstellungen beeinflussen wie Dateien in FreeCAD importiert und exportiert werden. Sie sind auf der Seite Import Export Einstellungen beschrieben.

Einstellungen der Arbeitsbereiche

Einstellungen für die eingebauten Arbeitsbereiche sind nachfolgend verknüpft. Diese Verknüpfungen sind auch unter Category:Preferences aufgelistet. Einige Arbeitsbereiche haben keine Einstellungen.

Skripten

Siehe auch: FreeCAD Grundlagen Skripten.

For a scripting example see Std DlgParameter.

Verwandt