Difference between revisions of "Path ToolLibraryEdit/zh"

From FreeCAD Documentation
Jump to: navigation, search
(Created page with "操作非常直接: * 导入...: 从一个XML文件导入刀具表. {{Note|Warning|该功能当前有些问题,如果你从来没有在FreeCAD中使用过XML文件,该功...")
Line 16: Line 16:
 
* 导入...: 从一个XML文件导入刀具表. {{Note|Warning|该功能当前有些问题,如果你从来没有在FreeCAD中使用过XML文件,该功能可能无法工作。}}
 
* 导入...: 从一个XML文件导入刀具表. {{Note|Warning|该功能当前有些问题,如果你从来没有在FreeCAD中使用过XML文件,该功能可能无法工作。}}
 
* 导出...: 以XML文件格式导出工具表。
 
* 导出...: 以XML文件格式导出工具表。
* 新建刀具: 打开一个可以输入你的刀具参数opens a dialog where you can enter the parameters of your tool. See [[Path NewTool|Path NewTool]]
+
* 新建刀具: 打开一个可以输入你的刀具参数的对话框。详见[[Path NewTool|新刀具]]
* Delete: deletes the currently selected lines.{{Note|Warning|The tools are deleted from your tooltable even if you cancel the dialog}}
+
* 删除: 删除当前所选行。{{Note|Warning|即便你取消会话刀具依旧会从你的刀具表中删除。}}
* Move up: You cannot edit the tool number, instead you can move the selected line up to decrease it's tool number
+
* 上移: 你无法编辑刀具序号,但你可以将所选行上移来减少其刀具序号。。
* Move down: You can move the selected line down to increase it's tool number
+
* 下移: 你也可以向下移动所选行来增大其刀具编号。
  
 
* Create Tool Controller(s): If you check one or more of the checkboxes to the left in the tools list, this button becomes active. If you click it, the selected tools will be inserted in your current job.
 
* Create Tool Controller(s): If you check one or more of the checkboxes to the left in the tools list, this button becomes active. If you click it, the selected tools will be inserted in your current job.

Revision as of 01:44, 9 May 2019

Other languages:
Deutsch • ‎English • ‎français • ‎italiano • ‎中文
Arrow-left.svg Previous: Path Simulator.png Simulator

Path ToolLibraryEdit.png Path ToolLibraryEdit

Menu location
Path → Tool Manager
Workbenches
Path
Default shortcut
P,T
Introduced in version
-
See also


描述

刀具表编辑器用来编辑包含在刀路作业中机加项目刀具表中不同的刀具. 该刀具表被包含在项目中于不同操作使用以获取当前刀具这一必要信息。

它也可以用来为你的作业选择刀具。

Path-Tooltable.png

操作非常直接:

  • 导入...: 从一个XML文件导入刀具表.
    Warning

该功能当前有些问题,如果你从来没有在FreeCAD中使用过XML文件,该功能可能无法工作。

  • 导出...: 以XML文件格式导出工具表。
  • 新建刀具: 打开一个可以输入你的刀具参数的对话框。详见新刀具
  • 删除: 删除当前所选行。
    Warning

即便你取消会话刀具依旧会从你的刀具表中删除。

Usage

  1. Select a Path Job
  2. Press the Path ToolLibraryEdit.png Tool Manager button
  3. Create new tools or adjust the properties of existing tools.
    Set at least the diameter, FreeCAD needs it to calculate the radius compensation. As of version 0.17 this is the only value used for path creation. However, if you wish to use the simulation tool later, add cutting edge angle and cutting edge height as well.
    Path-ToolAdd.gif

Options


Arrow-left.svg Previous: Path Simulator.png Simulator
Next: Complete Loop Path-CompleteLoop.png Arrow-right.svg
Path Path-Workbench.svg