CAM SimpleCopy/ru
(Redirected from Path SimpleCopy/ru)
Outdated translations are marked like this.
Path SimpleCopy |
Системное название |
---|
Path SimpleCopy |
Расположение в меню |
Path → Path Modification → Простое копирование |
Верстаки |
Path |
Быстрые клавиши |
Нет |
Представлено в версии |
- |
См. также |
Path Copy |
Description
The tool SimpleCopy creates a non-parametric copy of a given path.
Usage
- Select one CAM object
- Press the Simple Copy button
Options
- The simple copy is not bound anymore to the path that was used to make the copy, and is not parametric. Therefore, when edited with the CAM Inspect tool, any change made to its G-code will be retained.
CAM
- Project Commands: Job, Post Process, Check the CAM job for common errors, Export Template
- Tool Commands: Inspect CAM Commands, CAM Simulator, Finish Selecting Loop, Toggle the Active State of the Operation, ToolBit Library editor, ToolBit Dock
- Basic Operations: Profile, Pocket Shape, Drilling, Face, Helix, Adaptive, Slot, Engrave, Deburr, Vcarve
- 3D Operations: 3D Pocket, 3D Surface, Waterline
- CAM Modification: Copy the operation in the job, Array, Simple Copy
- Specialty Operations: Thread Milling
- Miscellaneous: Area, Area workplane
- ToolBit architecture: Tools, ToolShape, ToolBit, ToolBit Library, ToolController
- Additional: Preferences, Scripting
Документация пользователя
- Начинающим
- Установка: Загрузка, Windows, Linux, Mac, Дополнительных компонентов, Docker, AppImage, Ubuntu Snap
- Базовая: О FreeCAD, Интерфейс, Навигация мыши, Методы выделения, Имя объекта, Настройки, Верстаки, Структура документа, Свойства, Помоги FreeCAD, Пожертвования
- Помощь: Учебники, Видео учебники
- Верстаки: Std Base, Arch, Assembly, CAM, Draft, FEM, Inspection, Mesh, OpenSCAD, Part, PartDesign, Points, Reverse Engineering, Robot, Sketcher, Spreadsheet, Start, Surface, TechDraw, Test Framework, Web