CAM MillFace/fr: Difference between revisions

From FreeCAD Documentation
(Created page with "* Étant donné que les outils de tracé fonctionnent uniquement sur la géométrie des arêtes/faces sélectionnées et ne se rapportent pas au reste du modèle 3D, les trac...")
(Created page with "== Surfaçage de face verticale ==")
Line 35: Line 35:




== Vertical face milling ==
== Surfaçage de face verticale ==


*This tool will not work on a '''vertical plane''' or vertical non planar surface. Vertical operations can be achieved by using the face profile tool or edge profile tool. These will need the selection of a face or closed loop of edges ''including the top or bottom edge of the vertical surface desired''). The extent of the path can then be reduced using the ''Boundary Dress-up'' tool to be found on the ''Path'' menu. With the Dress-up tool select ''Create Box'' option and reduce the size to limit the scope of the profile path. These settings will not allow the origin of the boundary box to be moved, however. This must be done by adjusting the Placement settings in the tree-view.
*This tool will not work on a '''vertical plane''' or vertical non planar surface. Vertical operations can be achieved by using the face profile tool or edge profile tool. These will need the selection of a face or closed loop of edges ''including the top or bottom edge of the vertical surface desired''). The extent of the path can then be reduced using the ''Boundary Dress-up'' tool to be found on the ''Path'' menu. With the Dress-up tool select ''Create Box'' option and reduce the size to limit the scope of the profile path. These settings will not allow the origin of the boundary box to be moved, however. This must be done by adjusting the Placement settings in the tree-view.

Revision as of 10:51, 15 December 2019

Other languages:

Path Surfaçage

Emplacement du menu
Path → Face
Ateliers
Path
Raccourci par défaut
Aucun
Introduit dans la version
-
Voir aussi
Aucun


Description

L'outil Face Mill (Surfaçage) crée un chemin pour effectuer une opération de surfaçage sur une surface horizontale.


Avertissements

  • L'utilisation de cette fonction sur un plan incliné peut produire des résultats inattendus: elle génèrera toujours un chemin pour couper une surface horizontale. L'étendue de la coupe sera la projection horizontale du plan incliné, effectuée à une hauteur correspondante au point le plus bas de ce plan.
  • Étant donné que les outils de tracé fonctionnent uniquement sur la géométrie des arêtes/faces sélectionnées et ne se rapportent pas au reste du modèle 3D, les tracés ne dépasseront pas les limites du plan choisi, même s'il est entouré de brut inutilisé ou d'air. Cela laissera des coins non usinés. Ceux-ci peuvent parfois être supprimés avec l'un des outils de rectification disponibles dans le menu Path.


Surfaçage de face verticale

  • This tool will not work on a vertical plane or vertical non planar surface. Vertical operations can be achieved by using the face profile tool or edge profile tool. These will need the selection of a face or closed loop of edges including the top or bottom edge of the vertical surface desired). The extent of the path can then be reduced using the Boundary Dress-up tool to be found on the Path menu. With the Dress-up tool select Create Box option and reduce the size to limit the scope of the profile path. These settings will not allow the origin of the boundary box to be moved, however. This must be done by adjusting the Placement settings in the tree-view.
  • This will work on compound surfaces such as several vertical planes or cylindrical surfaces joined together, so long as they form one continuous surface.

Template:Path Tools navi

User documentation
Retrieved from "http://wiki.freecad.org/index.php?title=CAM_MillFace/fr&oldid=563215"