CAM MillFace

From FreeCAD Documentation
Revision as of 01:22, 9 December 2019 by Freman (talk | contribs) (add some content.)

Path-Face

Menu location
Path → Face
Workbenches
Path
Default shortcut
None
Introduced in version
-
See also
None


Description

The Face Mill tool creates a path to perform a facing operation on a horizontal surface. Using it on an inclined plane may produce unexpected results. It will still produce a path to cut a horizontal surface. The extent of the cut will be the horizontal projection of the inclined plane at a height corresponding to the lowest point in that plane.