CAM Fixture/es: Difference between revisions

From FreeCAD Documentation
(Created page with "==Descripción==")
(Updating to match new version of source page)
(8 intermediate revisions by 2 users not shown)
Line 1: Line 1:
<languages/>
{{Docnav|[[Path_DressupTag|Tag Dressup]]|[[Path_Comment|Comment]]|[[Path_Workbench|Path]]|IconL=Path_DressupTag.png|IconC=Path-Workbench.svg|IconR=Path_Comment.png}}

{{GuiCommand|Name=Fixtura de trayectoria|Workbenches=[[Path Workbench|Trayectoria]]|MenuLocation=Trayectoria → Comandos Parciales → Fixtura|Shortcut=P,F|SeeAlso=}}
{{GuiCommand|Name=Fixtura de trayectoria|Workbenches=[[Path Workbench|Trayectoria]]|MenuLocation=Trayectoria → Comandos Parciales → Fixtura|Shortcut=P,F|SeeAlso=}}


==Descripción==
==Descripción==


<div class="mw-translate-fuzzy">
This tool sets a fixture point (G53-G59) for next operations
Esta herramienta coloca un punto de fixtura (G53-G59) para las siguientes operaciones
</div>


Target Work Offset Coordinates typically include: Fixtures G53 to G59. The G-Code is simply the Fixture (G53, G54, etc...). The coordinate offset fixtures represent:
==Usage==
*G53 → Machine coordinate system.
*G54 → Scratchpad coordinate system.
*G55 to G59.9 → Coordinate fixtures allowing work offsets, relative to Homing switches located on the CNC machine, to be used.


The G59 Fixture is used to expand available fixtures. The degree of expansion implemented is CNC machine specific, and this command allows provides for G59.1 to G59.9.
# Press the {{KEY|[[Image:Path Fixture.png|16px]] [[Path Fixture|Fixture]]}} button
# Set the desired fixture


==Properties==
==Utilización==


<div class="mw-translate-fuzzy">
* {{PropertyData|Fixture}}: Sets the current fixture point
# Presiona el boton {{KEY|[[Image:Path Fixture.png|16px]] [[Path Fixture|Fixtura]]}}
* {{PropertyData|Active}}: Defines if this command is active or not when inserted into a compound
# Coloca la fixtura deseada
</div>

==Propiedades==

* {{PropertyData|Fixtura}}: Coloca el actual punto como fixtura
* {{PropertyData|Activar}}: Define si este comando esta activo o no cuando es introducido a un compuesto.



{{Docnav|[[Path_DressupTag|Tag Dressup]]|[[Path_Comment|Comment]]|[[Path_Workbench|Path]]|IconL=Path_DressupTag.png|IconC=Path-Workbench.svg|IconR=Path_Comment.png}}

{{Path_Tools_navi}}

{{Userdocnavi}}


{{clear}}
{{clear}}
<languages/>

Revision as of 11:27, 20 February 2019

Fixtura de trayectoria

Menu location
Trayectoria → Comandos Parciales → Fixtura
Workbenches
Trayectoria
Default shortcut
P,F
Introduced in version
-
See also
None

Descripción

Esta herramienta coloca un punto de fixtura (G53-G59) para las siguientes operaciones

Target Work Offset Coordinates typically include: Fixtures G53 to G59. The G-Code is simply the Fixture (G53, G54, etc...). The coordinate offset fixtures represent:

  • G53 → Machine coordinate system.
  • G54 → Scratchpad coordinate system.
  • G55 to G59.9 → Coordinate fixtures allowing work offsets, relative to Homing switches located on the CNC machine, to be used.

The G59 Fixture is used to expand available fixtures. The degree of expansion implemented is CNC machine specific, and this command allows provides for G59.1 to G59.9.

Utilización

  1. Presiona el boton Fixtura
  2. Coloca la fixtura deseada

Propiedades

  • DatosFixtura: Coloca el actual punto como fixtura
  • DatosActivar: Define si este comando esta activo o no cuando es introducido a un compuesto.