刀路轮廓

From FreeCAD Documentation
Revision as of 07:09, 11 May 2019 by Renoxray (talk | contribs) (Created page with "====深度==== * {{PropertyData|起始深度}}:刀具起始深度-Z方向起始深度。 * {{PropertyData|完结深度}}: 刀具完结深度Final-Z方向最低切削面。 * {...")
Jump to: navigation, search
Other languages:
Deutsch • ‎English • ‎français • ‎italiano • ‎română • ‎中文

Path Contour.svg Path Contour

Menu location
Path → Contour
Workbenches
Path
Default shortcut
None
Introduced in version
-
See also


描述

轮廓工具创建一个简单的,由基于复杂3D零件-对象切割出的外部轮廓线。整个作业模型在轮廓命令被调用时为刀具运行提供输入,无论实体几何体是否被选中。起始点可以从刀具运行编辑器中选择,使用一个在属性预览->起始点定义的位置。

刀路轮廓对象将成为刀路作业的一部分。

PathContourToolExample.png

使用

  1. 按下Path Contour.png Path 轮廓线按钮。
  2. 调整所需的属性


属性

基础几何体

  • 添加,如果尚未完成,该元素应是刀路的基础。
    • 你可以删除或者改变其他元素。

深度

  • Data起始深度:刀具起始深度-Z方向起始深度。
  • Data完结深度: 刀具完结深度Final-Z方向最低切削面。
  • Data刀具向下步进量: 刀具向下步进量- 一次切削的材料量。

Height

  • DataSafe Height: The hight above the workpeace where rapid motions are allowed.
  • DataClearance Height: The height needed to clear clamps and obstructions

Operation

  • DataTool Controller: Defines the Tool controller used in the Operation
  • DataCut Side: Defines on which side the cut should be done
  • DataDirection: Specifies a CW or CCW move for the cut
  • DataExtra Offset: Addet to the tool diameter to leave some material for a finish path
  • DataUse Start Point: Set the start point of the path manualy (not implemented jet)
  • DataUse Compensation: Creates a path with offset of the tool radius to respect the parts dimensions