Część: Połączenie

From FreeCAD Documentation
Revision as of 14:25, 13 February 2019 by FuzzyBot (talk | contribs) (Updating to match new version of source page)

Part Union

Lokalizacja w menu
Part → Boolean → Union
Środowisko pracy
Part
Domyślny skrót
brak
Wprowadzono w wersji
-
Zobacz także
Part Cut, Part Common

Description

Unites (fuses) selected Part objects into one. This operation is fully parametric and the components can be modified and the result recomputed.

This command allows you to perform quickly this Boolean operation.

How to use

  1. Select two or more shapes
  2. Press the Part Union button.

Supported inputs

Input objects must be OpenCascade shapes. Examples: stuff made with Part, PartDesign, Sketcher workbenches. Not meshes (unless those were converted to shapes) - for meshes, there are specific Boolean tools in MeshDesign workbench.

  • Solid + Solid: the result is a solid that occupies all the volume covered by the inputs
  • Shell + Shell, Shell + Face, Face + Face: the result is a shell. Where faces intersect, they are split. Shells can be non-manifold. After fusion, faces can be united by Refining the result.
  • Wire + Wire, Edge + Wire, Edge + Edge: the result is a wire. Edges are split where they intersect.

Compounds are supported; however, it is assumed that shapes packed into a compound do not touch or intersect. If they actually do, Fusion will likely fail, or produce an incorrect result.

Options

Items can be added and removed from the fusion, by dragging them in or out of the fusion feature in the tree view with the mouse. A manual recompute (press F5 key or click on the recompute icon) is required to see the results.

After this operation it may be necessary to clean the shape with RefineShape.