Part Torus/cs: Difference between revisions

From FreeCAD Documentation
(Created page with "Díl Torus")
 
(Updating to match new version of source page)
(11 intermediate revisions by 3 users not shown)
Line 1: Line 1:
<languages/>
{{GuiCommand|Name=Part_Torus|MenuLocation=Part -> Torus||Workbenches=[[Part_Module|Part_Module]],Complete|SeeAlso=[[Part_CreatePrimitives|Part_CreatePrimitives]]}}
{{Docnav
|[[Part_Sphere|Sphere]]
|[[Part_CreatePrimitives|CreatePrimitives]]
|[[Part_Module|Part]]
|IconL=Part_Sphere.svg
|IconC=Workbench_Part.svg
|IconR=Part_CreatePrimitives.svg
}}


<div class="mw-translate-fuzzy">
Creates a simple parametric torus, with position, angle1, angle2, angle3, radius1 and radius2 parameters. The torus will be positioned at origin (point 0,0,0) on creation. The angle parameters permit to make a portion of torus instead of a full one (they are set to 360° by default), the radius 1 and 2 define respectively the size of the hole and the ring thickness of the torus.
{{GuiCommand/cs|Name=Part_Torus|Name/cs=Díl_Torus|MenuLocation=Díl -> Torus||Workbenches=[[Part_Module/cs|Modul Díl]], Kompletace|SeeAlso=[[Part_CreatePrimitives/cs|Díl Vytváření zákl.geom.tvarů]]}}
</div>


<div class="mw-translate-fuzzy">
Vytvoří jednoduchý parametrický torus podle parametrů pozice, úhel1, úhel2, úhel3, poloměr1 a poloměr2. Při vytvoření je torus umístěn do počátečního bodu (bod 0,0,0). Parametry úhly dovolují vytvořit částečný torus místo celého (úhly jsou defaultně nastaveny na 360°), poloměr 1 definuje vnitřní díru a poloměr 2 určuje tloušťku torusu.
</div>

[[File:SimpleTorus.jpg|400px]]

==Usage==

# Switch to the [[Image:Workbench_Part.svg|24px]] [[Part Workbench|Part]] workbench.
# Invoke the Part Torus command several ways:
#* Press the [[Image:Part Torus.svg|24px]] button.
#* Use the {{MenuCommand|Part → Torus}} entry in the top menu.

'''Result:''' The torus will be positioned at origin (point 0,0,0) on creation.<br />
The angle parameters (angle1, angle2, angle3), as well as the radius parameter (radius1 , radius2) parameters permit to parametrize the torus, see next section.

== Option ==

[[File:TorusExampleOverviewParameters.jpg]]

'''Parameter'''

A torus can be assimilated to a small disc that makes a circular orbit around an imaginary axe. Thus the parametric torus is defined by the following parameters:

* {{Parameter|Radius1:}} Radius of the circle around which the disc circulate
* {{Parameter|Radius2:}} Radius of the disc defining the form of the torus
* {{Parameter|Angle1:}} 1st angle to cut / define the disc of the torus
* {{Parameter|Angle2:}} 2nd angle to cut / define the disc of the torus
* {{Parameter|Angle3:}} 3rd angle to define the circumference of the torus.

as well as the standard set of placement parameters. The pictures below give a visual overview of the parameters antecedently mentioned:

[[File:TorusExampleRadius1.jpg]]
The parameter Radius1 has a value of 20 mm.

[[File:TorusExampleRadius2.jpg]]
The parameter Radius2 has a value of 2 mm.

[[File:TorusExampleAngle1.jpg]]
The parameter Angle1 has a value of -90°. Notice that, the "angle measure" tool cannot display negative angle. Considered the displayed value in picture as "-90°".

[[File:TorusExampleAngle2.jpg]]
The parameter Angle2 has a value of 90°.

[[File:TorusExampleAngle3.jpg]]
The parameter Angle3 has a value of 90°.
{{clear}}
{{clear}}

<languages/>

{{Docnav
|[[Part_Sphere|Sphere]]
|[[Part_CreatePrimitives|CreatePrimitives]]
|[[Part_Module|Part]]
|IconL=Part_Sphere.svg
|IconC=Workbench_Part.svg
|IconR=Part_CreatePrimitives.svg
}}

{{Part Tools navi}}

{{Userdocnavi}}

Revision as of 22:05, 13 February 2020

Díl_Torus

Umístění Menu
Díl -> Torus
Pracovní stoly
Modul Díl, Kompletace
Výchozí zástupce
Nikdo
Představen ve verzi
-
Viz také
Díl Vytváření zákl.geom.tvarů

Vytvoří jednoduchý parametrický torus podle parametrů pozice, úhel1, úhel2, úhel3, poloměr1 a poloměr2. Při vytvoření je torus umístěn do počátečního bodu (bod 0,0,0). Parametry úhly dovolují vytvořit částečný torus místo celého (úhly jsou defaultně nastaveny na 360°), poloměr 1 definuje vnitřní díru a poloměr 2 určuje tloušťku torusu.

Usage

  1. Switch to the Part workbench.
  2. Invoke the Part Torus command several ways:
    • Press the button.
    • Use the Part → Torus entry in the top menu.

Result: The torus will be positioned at origin (point 0,0,0) on creation.
The angle parameters (angle1, angle2, angle3), as well as the radius parameter (radius1 , radius2) parameters permit to parametrize the torus, see next section.

Option

Parameter

A torus can be assimilated to a small disc that makes a circular orbit around an imaginary axe. Thus the parametric torus is defined by the following parameters:

  • Radius1: Radius of the circle around which the disc circulate
  • Radius2: Radius of the disc defining the form of the torus
  • Angle1: 1st angle to cut / define the disc of the torus
  • Angle2: 2nd angle to cut / define the disc of the torus
  • Angle3: 3rd angle to define the circumference of the torus.

as well as the standard set of placement parameters. The pictures below give a visual overview of the parameters antecedently mentioned:

The parameter Radius1 has a value of 20 mm.

The parameter Radius2 has a value of 2 mm.

The parameter Angle1 has a value of -90°. Notice that, the "angle measure" tool cannot display negative angle. Considered the displayed value in picture as "-90°".

The parameter Angle2 has a value of 90°.

The parameter Angle3 has a value of 90°.