Difference between revisions of "Part Torus"

From FreeCAD Documentation
Jump to: navigation, search
(added languages template)
m
Line 3: Line 3:
 
Creates a simple parametric torus, with position, angle1, angle2, angle3, radius1 and radius2 parameters. The torus will be positioned at origin (point 0,0,0) on creation. The angle parameters permit to make a portion of torus instead of a full one (they are set to 360° by default), the radius 1 and 2 define respectively the size of the hole and the ring thickness of the torus.
 
Creates a simple parametric torus, with position, angle1, angle2, angle3, radius1 and radius2 parameters. The torus will be positioned at origin (point 0,0,0) on creation. The angle parameters permit to make a portion of torus instead of a full one (they are set to 360° by default), the radius 1 and 2 define respectively the size of the hole and the ring thickness of the torus.
  
{{languages | {{fr|Part Torus/fr}} }}
+
{{languages | {{fr|Part Torus/fr}} {{es|Part Torus/es}} }}

Revision as of 00:32, 26 August 2011

Part Torus.svg Part_Torus

Menu location
{{{MenuLocation}}}
Workbenches
Part,Complete
Default shortcut
None
Introduced in version
-
See also
None


Creates a simple parametric torus, with position, angle1, angle2, angle3, radius1 and radius2 parameters. The torus will be positioned at origin (point 0,0,0) on creation. The angle parameters permit to make a portion of torus instead of a full one (they are set to 360° by default), the radius 1 and 2 define respectively the size of the hole and the ring thickness of the torus.

Available translations of this page: Flag-fr.jpg Flag-es.jpg