Part Sphere/pl: Difference between revisions

From FreeCAD Documentation
No edit summary
No edit summary
(8 intermediate revisions by one other user not shown)
Line 1: Line 1:
⚫
<languages/>
{{GuiCommand/pl|Name=Part Sphere|Name/pl=Part Sphere|MenuLocation=Part -> Sphere||Workbenches=[[Part_Module/pl|Part Module]],Complete|SeeAlso=[[Part_CreatePrimitives/pl|Part CreatePrimitives]]}}
{{Docnav|[[Part_Cylinder|Cylinder]]|[[Part_Torus|Torus]]|[[Part_Module|Part]]|IconL=Part_Cylinder.png|IconC=Workbench_Part.svg|IconR=Part_Torus.png}}

{{GuiCommand/pl
|Name=Part Sphere|MenuLocation=Part → Sphere
|
|Workbenches=[[Part_Module|Part Module]]
|SeeAlso=[[Part_CreatePrimitives|Part CreatePrimitives]]
}}


== Description ==
== Description ==
Creates a simple parametric sphere, with position, angle1, angle2, angle3 and radius parameters.
Creates a simple parametric sphere, with position, angle1, angle2, angle3 and radius parameters.

[[File:SimpleSphere.jpg|400px]]


== How to use ==
== How to use ==
In the workbench [[Part_Workbench|Part]] click on the sphere icon [[Image:Part Sphere.png|32px]]. The sphere will be positioned at origin (point 0,0,0) on creation. The angle parameters permit to make a portion of sphere instead of a full sphere (they are set to 360° by default).
In the workbench [[Part_Workbench|Part]] click on the sphere icon [[Image:Part Sphere.png|32px]]. The sphere will be positioned at origin (point 0,0,0) on creation. The angle parameters permit to make a portion of sphere instead of a full sphere (they are set to 360° by default).


== Options ==
== Options ==


The parametric sphere is defined by the following parameters:

* Radius
* Angle 1
* Angle 2
* Angle 3
* as well as the standard set of placement parameters

The picture below gives an overview of a parametric sphere with parameters different from the default value.

[[File:PartDesign_Sphere_Parameter_en.jpg|600px]]

====Parameter====
* {{Parameter|Radius:}} Radius of the sphere
* {{Parameter|Angle 1:}} 1nd angle to cut / define the sphere
* {{Parameter|Angle 2:}} 2nd angle to cut / define the sphere
* {{Parameter|Angle 3:}} 3rd angle to cut / define the sphere

Because it is quite difficult to explain the meaning of the parameters angle 1, angle 2, angle 3, the picture below gives an explanation about these parameters with following values: angle 1 = -45°, angle 2 = 45° and angle 3= 90°.

[[File:SphereCutThreeAngles.jpg|400px]]
{{clear}}
{{clear}}

⚫
<languages/>
{{Docnav|[[Part_Cylinder|Cylinder]]|[[Part_Torus|Torus]]|[[Part_Module|Part]]|IconL=Part_Cylinder.png|IconC=Workbench_Part.svg|IconR=Part_Torus.png}}

{{Part Tools navi}}

{{Userdocnavi}}

Revision as of 20:19, 22 November 2019

Other languages:

Part Sphere

Lokalizacja w menu
Part → Sphere
Środowisko pracy
Part Module
Domyślny skrót
brak
Wprowadzono w wersji
-
Zobacz także
Part CreatePrimitives

Description

Creates a simple parametric sphere, with position, angle1, angle2, angle3 and radius parameters.

How to use

In the workbench Part click on the sphere icon . The sphere will be positioned at origin (point 0,0,0) on creation. The angle parameters permit to make a portion of sphere instead of a full sphere (they are set to 360° by default).

Options

The parametric sphere is defined by the following parameters:

  • Radius
  • Angle 1
  • Angle 2
  • Angle 3
  • as well as the standard set of placement parameters

The picture below gives an overview of a parametric sphere with parameters different from the default value.

Parameter

  • Radius: Radius of the sphere
  • Angle 1: 1nd angle to cut / define the sphere
  • Angle 2: 2nd angle to cut / define the sphere
  • Angle 3: 3rd angle to cut / define the sphere

Because it is quite difficult to explain the meaning of the parameters angle 1, angle 2, angle 3, the picture below gives an explanation about these parameters with following values: angle 1 = -45°, angle 2 = 45° and angle 3= 90°.

Part
User documentation
Retrieved from "http://wiki.freecad.org/index.php?title=Part_Sphere/pl&oldid=547997"