Part Sphere: Difference between revisions
FreeMaxCar (talk | contribs) No edit summary |
FreeMaxCar (talk | contribs) No edit summary |
||
Line 7: | Line 7: | ||
== Description == <!--T:2--> |
== Description == <!--T:2--> |
||
Creates a simple parametric sphere, with position, angle1, angle2, angle3 and radius parameters. |
Creates a simple parametric sphere, with position, angle1, angle2, angle3 and radius parameters. |
||
[[File:SimpleSphere.jpg|200px]] |
[[File:SimpleSphere.jpg|200px]] |
||
Revision as of 15:19, 19 December 2014
Part Sphere |
Menu location |
---|
Part -> Sphere |
Workbenches |
Part Module,Complete |
Default shortcut |
None |
Introduced in version |
- |
See also |
Part CreatePrimitives |
Description
Creates a simple parametric sphere, with position, angle1, angle2, angle3 and radius parameters.
How to use
In the workbench Part click on the sphere icon . The sphere will be positioned at origin (point 0,0,0) on creation. The angle parameters permit to make a portion of sphere instead of a full sphere (they are set to 360° by default).
Options
The parametric sphere is defined by the following parameters:
- Radius
- Angle 1
- Angle 2
- Angle 3
- as well as the standard set of placement parameters
The picture below gives an overview of a parametric sphere with parameters different from the default value.
Parameter
- Radius: Radius of the sphere
- Angle 1: Angle defined between the y-axis (green arrow) and an imaginary rotating line around the x-axis (red arrow). One end of the line is fixed on the origin. The other end of the line may rotate as said around the x-axis and remain in the XY-plane. The line has the length of the radius of the sphere.
- Angle 2: Test