Part CrossSections/hr

From FreeCAD Documentation
Revision as of 16:48, 13 February 2019 by FuzzyBot (talk | contribs) (Updating to match new version of source page)

Part SectionCross

Menu location
Part → Cross-sections...
Workbenches
Part
Default shortcut
None
Introduced in version
-
See also
Part Section

Opis

The Cross-sections utility creates one or more cross-sections through the selected shape.

Kako koristiti

  1. Select a shape.
  2. Press the Cross-sections button.
  3. Define the guiding plane.
  4. Define the position (height of the cross-section).
  5. Optionally, check Sections to create more than one cross-section:
    • Checking On both sides will distribute the cross-sections on each side of the guiding plane location.
    • Set the count.
  6. Press OK.

Limitations

  • The resulting object is not parametric, that is it is not linked to the original shape.
  • A single object is created, even with more than one cross-section.

Primjer

Select an object

Dialog window

Result