Part CrossSections: Difference between revisions

From FreeCAD Documentation
m (Docnav)
(Marked this version for translation)
Line 1: Line 1:
<languages/>
<languages/>
<translate>
<translate>
<!--T:12-->
{{Docnav|[[Part_Section|Section]]|[[Part_Chamfer|Chamfer]]|[[Part_Module|Part]]|IconL=Part_Section.png|IconC=Workbench_Part.svg|IconR=Part_Chamfer.png}}
{{Docnav|[[Part_Section|Section]]|[[Part_Chamfer|Chamfer]]|[[Part_Module|Part]]|IconL=Part_Section.png|IconC=Workbench_Part.svg|IconR=Part_Chamfer.png}}


Line 45: Line 46:
[[Image:SectionCross3.png|Result]]
[[Image:SectionCross3.png|Result]]


<!--T:13-->
{{Docnav|[[Part_Section|Section]]|[[Part_Chamfer|Chamfer]]|[[Part_Module|Part]]|IconL=Part_Section.png|IconC=Workbench_Part.svg|IconR=Part_Chamfer.png}}
{{Docnav|[[Part_Section|Section]]|[[Part_Chamfer|Chamfer]]|[[Part_Module|Part]]|IconL=Part_Section.png|IconC=Workbench_Part.svg|IconR=Part_Chamfer.png}}


<!--T:14-->
{{Part Tools navi}}
{{Part Tools navi}}


<!--T:15-->
{{Userdocnavi}}
{{Userdocnavi}}



Revision as of 16:47, 13 February 2019

Part SectionCross

Menu location
Part → Cross-sections...
Workbenches
Part
Default shortcut
None
Introduced in version
-
See also
Part Section

Description

The Cross-sections utility creates one or more cross-sections through the selected shape.

How to use

  1. Select a shape.
  2. Press the Cross-sections button.
  3. Define the guiding plane.
  4. Define the position (height of the cross-section).
  5. Optionally, check Sections to create more than one cross-section:
    • Checking On both sides will distribute the cross-sections on each side of the guiding plane location.
    • Set the count.
  6. Press OK.

Limitations

  • The resulting object is not parametric, that is it is not linked to the original shape.
  • A single object is created, even with more than one cross-section.

Example

Select an object

Dialog window

Result